To setup your modem, you have to do several things 1. Download ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20070813.tar.gz from http://linmodems.technion.ac.il/packages/smartlink/ 2. Make sure kernel-devel package is installed for your running kernel kernel-devel-2.6.23.8-34.fc7 $ rpm -qa kernel-devel and hope that kernel-devel-2.6.23.8-34.fc7 appears 3. have development packages installed, if they are not present and since you have eth0 connection, type # yum install "Development Tools" or something like this * I am not sure here on this one* 4. carefullly follow the instructions provided to install the modem Since you have eth0 also ready, when you want to use modem, you have to become root $ su - Password: # ifconfig eth0 down to stop eth0 from interfering with your modem connection. # You can check the following page for a working example/howto for slamr http://www20.brinkster.com/olivares/slmodemd-setup-1.html ScanModem reports this from here The modem is supported by the Smartlink slamr driver plus the slmodemd helper utility. Read the Smartlink.txt and Modem/YourSystem.txt for follow through guidance. For 2.6.23.8-34.fc7 compiling drivers is necessary. As of October 2007 the current packages at http://linmodems.technion.ac.il/packages/smartlink/ are the ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20070813.tar.gz If you have further questions/comments please reply to this mail. Regards, Antonio On Dec 20, 2007 12:43 PM, root <rahulrian@xxxxxxxxxx> wrote: > pl help me to install. I have already one broadband connection with eth0 > but I also want for a dialup connection >
