> Amos > > RE: # slmodemd --country=ITALY /dev/slamr0 > your particular modem does not use /dev/slamr0 > but rather MUST have the specification: modem:1 > > Your core problem is with the slmodemd you are using, it does not have > the needed ALSA support.: > ALSA support is not compiled in (see README for howto). > You seem to have copied/installled some SuSE slmodemd over the one you > successfully used earlier when: > ttySL0<*1>: ATQ0 V1 E1 -- OK > ttySL0<*1>: ATQ0 V1 E1 Z -- OK > ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft Modem > > So just again do the copy over of the slmodemd from the SLMODEMD.4.2 resource > and retest > # slmodemd --country=ITALY modem:1 > > MarvS Thank you. I made as per your suggestion: linux-amosse:/home/amosse/Documents/ScanModem/SLMODEMD.gcc4.2 # cp slmodemd /usr/sbin/slmodemd cp: impossibile creare il file normale `/usr/sbin/slmodemd': Text file busy Amos ps: "impossibile creare il file normale" = impossible to create normal file
