Vance:
RE: > I tried to send this to discuss@xxxxxxxxxxxxx and it bounced.
-------
Compose the email in plain text. HTML is rejected by the List Server
as it can hide viruses
RE: the Smartlink stopped working after a couple of weeks
========
You probably updated your kernel. For every kernel update you must
also get/compile matching ungrab-winmodem and slamr drivers.
Class 0703: 10b9:5459 Modem: ALi Corporation SmartLink SmartPCI561 56K Modem
Primary PCI_id 10b9:5459
Support type needed or chipset: slamr
---------
is much easier to keep in service than the Intel-537 types.
For 2.6.15-23-686 , there is a package slamr-2.6.15-23-686.tar.gz at
http://phep2.technion.ac.il/linmodems/packages/smartlink/Ubuntu/
But it would be better to upgrade to the current Gutsy release and
install the matching drivers afterward
MarvS
On Dec 4, 2007 2:28 PM, Vance and Sarah Rogers <vrogers@xxxxxxxxxxx> wrote:
>
>
> Marvin,
>
> I tried to send this to discuss@xxxxxxxxxxxxx and it bounced. I still had
> you address, so I am forwarding it to you. Any help would be appreciated.
>
> Vance Rogers
>
>
> ----- Original Message -----
> From: Vance and Sarah Rogers
> To: Discuss@xxxxxxxxxxxxx
> Sent: Monday, December 03, 2007 5:07 PM
> Subject: Vance Rogers, USA, kernel 2.6.15-39-686
>
>
> I have changed my modem to an Instel - 536ep, thinking that it would be
> easier to set up than the Smartlink modem I had. The Ubuntu software for
> the Smartlin it stopped working after a couple of weeks.
>
> I have downloaded an Intel driver - intel-536EP-2.56.76.0_23_02_2007, and
> have run the scan modem program. The ModemData.txt is attached.
>
> I read in the Linux materials that the slmar0 driver would sometimes work on
> the Intel modems. But I couldn't get it to work.
>
> I checked my BIOS, and the IRQ was 4, not the 255 that appears in the
> ModemData.txt.
>
> Thanks in advance for your help.
