Casey For 2.6.22-14-generic, at http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/ there is slamr-2.6.22-14-generic.tar.gz with drivers aalready compiled. just unpack it under Linux and in its folder, Run $ sudo ./setup MarvS On Nov 29, 2007 6:34 AM, Firas Kraiem <fkraiem@xxxxxxx> wrote: > Greetings > > > There is candidate modem software. > > > > For candidate modem in PCI bus: 01:02.0 > > Class 0703: 10b9:5459 Modem: ALi Corporation SmartLink SmartPCI561 56K > > Modem > > Primary PCI_id 10b9:5459 > > Support type needed or chipset: slamr > > > > > > The modem is supported by the Smartlink slamr driver > > plus the slmodemd helper utility. Read the > > Smartlink.txt and Modem/YourSystem.txt for follow through guidance. > > > > > > For 2.6.22-14-generic compiling drivers is necessary. As of October 2007 > > the current packages at > > http://linmodems.technion.ac.il/packages/smartlink/ are the > > ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20070813.tar.gz > > So you need the slamr driver. However, the latter part is not correct > and compilation is not necessary. Grab the tarball containing > precompiled modules for your kernel from here : > > http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/ > > extract it and read instructions therein. The Smartlink.txt file > generated by ScanModem might also help you, but feel free to write back > if you have problems. > > Firas > > -- > () ascii ribbon campaign - against html e-mail > /\ www.asciiribbon.org - against proprietary attachments > >
