Generoso, you did not install the kernel-devel package. You need this to succeed in compiling. Support for Fedora 6 is almost over. They will officially end support Dec. 7, 2007. It might be best to get Fedora 7 or Fedora 8. That decision is up to you. However, if you would like to keep Fedora 6, you need to get kernel-devel package from http://rpm.pbone.net/index.php3/stat/4/idpl/3416469/com/kernel-devel-2.6.18-1.2798.fc6.i686.rpm.html or another place convenient for you. Install it with # rpm -ivh kernel-devel* then rerun install procedure first run $ make clean $ make KERNEL_DIR=/lib/modules/2.2.6.18-1.2798.fc6/build $ make $ su - Password: # make install cd ungrab-winmodem-directory/ # make clean # make # make install In case you get stuck carefully reread the following how to http://www20.brinkster.com/olivares/slmodemd-setup-1.html Regards, Antonio --- "generoso81@xxxxxxxxxxx" <generoso81@xxxxxxxxxxx> wrote: > > I thank you for the explanations, but I don't > succeed in installing > the drivers. > I have downloaded the packages "ungrub-winmodem- > 20070505. tar.gz" and > "slmodem-2.9.11 20070813.tar.gz" at http: > //linmodems.technion.ac.il/packages/smartlink /. > > I have decompressed > these packages but I don't succeed in compiling > them. > > When I try to > compile ungrub-winmodem with the command make I get > the following > error: > [root@localhost ungrab-winmodem-20070505] #make > make > modules > - C / lib/modules/2.6.18-1.2798.fc6/build > SUBDIRS=/home/generoso/Desktop/Generoso/ungrab-winmodem-20070505 > > make: * * * / lib/modules/2.6.18-1.2798.fc6/build: > No such file or > directory. Stop. > > When I try to compile slmodem with the command > make I get the following error: > > [root@localhost slmodem-2.9.11- > 20070813]# make > make -C modem all > make[1]: Entering directory > `/home/generoso/Desktop/Generoso/slmodem-2.9.11-20070813/modem' > rebuild > profile... gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM > -o modem_main.o - > c modem_main.c > make[1]: gcc: Command not found > make[1]: *** [modem_main. > o] Error 127 > make[1]: Leaving directory > `/home/generoso/Desktop/Generoso/slmodem-2.9.11-20070813/modem' > make: > *** [modem] Error 2 > > If I try to use the command modprobe as written > in > smartlink.txt, I have the following error: > [root@localhost media]# > modprobe ungrub-winmodem > FATAL: Module ungrub_winmodem not found > > Can > you help me to understand what I have to do? > thanks in advance > > > > ---- > Messaggio originale---- > Da: marvin.stodolsky@xxxxxxxxx > Data: 15-nov- > 2007 14.23 > A: "generoso81@xxxxxxxxxxx"<generoso81@xxxxxxxxxxx> > Cc: > <discuss@xxxxxxxxxxxxx> > Ogg: Re: Generoso, Italy, Fedora Core relase 6 > (Zod) Kernel 2.6.18-1.27 98.fc6 > > Antonio > Please help with this case. > > Generoso81, > For your SYstem: > CPU=x86_64, Fedora Core release 6 > (Zod) > Kernel Linux version 2.6.18-1.2798.fc6 > > The software will only > work when you boot in 32 bit mode, because it > has a pre-compiled 32 > bit > component. > > Class 0703: 1057:3052 Modem: Motorola Unknown > device > 3052 > Primary PCI_id 1057:3052 > Support type needed or chipset: > slamr > > > 1057:3052 has a Motorola chipset, poorly supported > by > Motorola > itself > However Zello discovered that drivers written to > support > Smartlink > modems do support the 1057:3052 chipset!! > > The modem > is > supported by the Smartlink slamr driver > plus the slmodemd > helper > utility. Read the > Smartlink.txt and Modem/YourSystem.txt for follow > through guidance. > > > For 2.6.18-1.2798.fc6 compiling drivers is > necessary. > As of October 2007 the current packages at > http://linmodems. > technion.ac.il/packages/smartlink/ are the > ungrab-winmodem-20070505. > tar.gz and > slmodem-2.9.11-20070813.tar.gz > > Read the Smartlink,txt > > Compile and install the packages from both packages > > MarvS > > > On Nov > 15, > 2007 7:03 AM, generoso81@xxxxxxxxxxx > <generoso81@xxxxxxxxxxx> > wrote: > > > I am looking for some dirvers for my modem. In > enclosure > there is the > > > file gotten Modem.txt performing ScanModem. Could > someone help to > > > understand me what I have to do? > > Thanks in advance > > > > > > ____________________________________________________________________________________ Be a better pen pal. Text or chat with friends inside Yahoo! Mail. See how. http://overview.mail.yahoo.com/
