Re: Milija Ceranic,Srbija kernel 2.6.20-15-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There is candidate modem software.

 For candidate modem in PCI bus:  00:05.0
   Class 0703: 1057:3052 Modem: Motorola Unknown device 3052
      Primary PCI_id  1057:3052
 Support type needed or chipset:    slamr
 


 1057:3052 has a Motorola chipset, poorly supported by Motorola itself
 However Zello discovered that drivers written to support Smartlink
  modems do support the 1057:3052 chipset!!
 It sufficed to add 1057:3052 to the list of modem cards recognized by
 the Smartlink slamr driver.
 There is a ungrab-winmodem driver used in conjunction with slamr,
 which must have 1057:3052
 similarly added. See messages from Zello:
 
    http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00846.html
 
    http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00848.html
 and Alvaro Aguirre about the ungrab-winmodem fix:

    http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00990.html
 For general guidance on ungrab-winmodem + slamr usage, read the
 Smartlink.txt

The modem is supported by the Smartlink slamr driver
plus the slmodemd helper utility.  Read the
Smartlink.txt and Modem/YourSystem.txt for follow through guidance.


 Download slamr-2.6.20-15-generic.tar.gz from
 http://linmodems.technion.il/packages/smartlink/Ubuntu/
 under Linux, open a terminal and unpack with:
 $ tar zxvf slamr*.tar.gz
 Move into the unpacked folder
 $ cd slamr-2.6.20-15-generic
 Look around
 $ ls
 Run the 
 $  sudo ./setup

 Afterwards do:
 $ slmodemd --help
 $ slmodemd --countrylist &> Clist.txt
 If not in the USA, look for your COUNTRY_NAME therein.
 Do and edit with:
 $ sudo gedit  /etc/default/sl-modem-daemon
 and therein replace the USA in the line:
 SLMODEMD_COUNTRY=USA
 This will provide for the correct Country setting in the automated:
    slmodemd -c COUNTRY /dev/slamr0

 Read the Smartlink.txt and YourSystem.txt 

Report back success/failure of above instructions.

Regards,

Antonio 

----- Original Message ----
From: Dobrica Ceranic <dobricaceranic@xxxxxxxxx>
To: Discuss@xxxxxxxxxxxxx
Sent: Thursday, November 8, 2007 12:26:54 PM
Subject: Milija Ceranic,Srbija kernel 2.6.20-15-generic


 
 

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

-----Inline Attachment Follows-----

 Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List
 Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.20-15-generic 
 With this Subject Line cogent experts will be alerted, and useful case
 names left in the Archive.
 YourCountry will enable Country specific guidance. Your contry's local
 Linux experts
 can be found through: http://www.linux.org/groups/index.html
 Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
 Internet Provider mail filters.
 So in a day, also check the Archived responses at
 http://www.linmodems.org 
--------------------------  System information
 ----------------------------
CPU=i686,  
Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2
 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007
 scanModem update of:  20071019


 There are no blacklisted modem drivers in /etc/modprobe*  files 

Advanced Linux Sound Architecture  (ALSA) spackage providing audio
 support 
on your System, also includes drivers for some modems. For modems using
 the 
snd-hda-intel  audio+modem driver, upgrades to a new ALSA version are
 sometimes 
necessary to achieve function. See for example:
    
  http://linmodems.technion.ac.il/bigarch/archive-seventh/msg02144.html
Copying ALSA diagnostics to Modem/ALSAmilija.tgz
ALSAversion = 1.0.13

USB modem not detected by lsusb

Modem or candidate host audio card have firmware information and
 diagnostics:

 PCI slot    PCI ID        SubsystemID    Name
 ----------    ---------    ---------    --------------
 00:05.0    1057:3052    1057:3020    Modem: Motorola Unknown device
 3052 

 Modem interrupt assignment and sharing: 
 --- Bootup diagnostics for card in PCI slot 00:05.0 ----
[   20.597066] ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level,
 low) -> IRQ 18
[   20.597421] 0000:00:05.0: ttyS2 at I/O 0xf008 (irq = 18) is a 16450
[   20.597670] 0000:00:05.0: ttyS3 at I/O 0xf010 (irq = 18) is a 8250
[   20.597837] Couldn't register serial port 0000:00:05.0: -28

 === Finished modem firmware and bootup diagnostics section. ===
 === Next deducing cogent software ===


There is candidate modem software.

 For candidate modem in PCI bus:  00:05.0
   Class 0703: 1057:3052 Modem: Motorola Unknown device 3052
      Primary PCI_id  1057:3052
 Support type needed or chipset:    slamr
 


 1057:3052 has a Motorola chipset, poorly supported by Motorola itself
 However Zello discovered that drivers written to support Smartlink
  modems do support the 1057:3052 chipset!!
 It sufficed to add 1057:3052 to the list of modem cards recognized by
 the Smartlink slamr driver.
 There is a ungrab-winmodem driver used in conjunction with slamr,
 which must have 1057:3052
 similarly added. See messages from Zello:
 
    http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00846.html
 
    http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00848.html
 and Alvaro Aguirre about the ungrab-winmodem fix:

    http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00990.html
 For general guidance on ungrab-winmodem + slamr usage, read the
 Smartlink.txt

The modem is supported by the Smartlink slamr driver
plus the slmodemd helper utility.  Read the
Smartlink.txt and Modem/YourSystem.txt for follow through guidance.


 Download slamr-2.6.20-15-generic.tar.gz from
 http://linmodems.technion.il/packages/smartlink/Ubuntu/
 under Linux, open a terminal and unpack with:
 $ tar zxvf slamr*.tar.gz
 Move into the unpacked folder
 $ cd slamr-2.6.20-15-generic
 Look around
 $ ls
 Run the 
 $  sudo ./setup

 Afterwards do:
 $ slmodemd --help
 $ slmodemd --countrylist &> Clist.txt
 If not in the USA, look for your COUNTRY_NAME therein.
 Do and edit with:
 $ sudo gedit  /etc/default/sl-modem-daemon
 and therein replace the USA in the line:
 SLMODEMD_COUNTRY=USA
 This will provide for the correct Country setting in the automated:
    slmodemd -c COUNTRY /dev/slamr0

 Read the Smartlink.txt and YourSystem.txt 
Writing Smartlink.txt
============ end Smartlink section =====================

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.1.2
             and the compiler used in kernel assembly: 4.1.2


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.1
   linuc_headers base folder /lib/modules/2.6.20-15-generic/build

 However some compilations and executable functions may need additional
 files,
 in the FileNames.h (so called kernel "h"eaders) collection installed
 in  /usr/include/ .
 For martian_modem, additional required packages are libc6-dev (and for
 Debian/Ubuntu,  linux-libc-dev). The also required headers of package
 libc6 are commonly installed by default. 



If a driver compilation files with message including some lack of some
 FileName.h (stdio.h for example. 
Some additional kernel-header files need installation to /usr/include.
For Debian/Ubuntu related distributions, run the following command to
 display the needed package list:
$ sudo apt-get -s install linux-kernel-devel
While some of the files may be on the install CD, others may have to be
 found through http://packages.ubuntu.com

For Ubuntu Feisty, additional packages required were:
 libc6-dev linux-libc-dev
available through http://packages.ubuntu.com/ , if not on the install
 CD.
Such packages may have different names for other Linux distributions.
Try installing just the libc6-dev, then test the compile again.


Checking pppd properties:
    -rwsr-xr-- 1 root dip 269224 2007-04-05 05:41 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
    $ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
    sudo chmod a+x /usr/sbin/pppd

Checking settings of:    /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to
 blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------






__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux