Zoran, There are severe problems with two devices as shown in dmseg> ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20and> ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 19This problem should be resolved first for System stability.Please return the output of:$ lspci Also installation of multiple softmodem cards may be contributing to problems.Please remove the card: > PCI slot PCI ID SubsystemID Name> ---------- --------- --------- --------------> 00:11.6 1106:3068 Communication controller: VIA Technologies, Inc. AC'97which is currently unresponsive. Then from http://phep2.technion.ac.il/linmodems/packages/ltmodem/sv92/ try using the package agrsm-20070804.tar.gz MarvSscanModem maintainer On 11/7/07, Antonio Olivares <olivares14031@xxxxxxxxx> wrote:> For candidate card, firmware information and bootup diagnostics are:>> PCI slot PCI ID SubsystemID Name> ---------- --------- --------- --------------> 00:0c.0 11c1:048c 11c1:044c Communication> controller: Agere Systems V.92 56K WinModem>> Modem interrupt assignment and sharing:> --- Bootup diagnostics for card in PCI slot 00:0c.0 ---->> For this one, The following driver should serve:> http://phep2.technion.ac.il/linmodems/packages/ltmodem/kernel-2.6/agrsm-20070804.tar.gz>> For candidate card, firmware information and bootup diagnostics are:>> PCI slot PCI ID SubsystemID Name> ---------- --------- --------- --------------> 00:11.6 1106:3068 Communication controller: VIA> Technologies, Inc. AC'97 Modem Controller>> Modem interrupt assignment and sharing:> 19: 631 IO-APIC-fasteoi VIA8237> --- Bootup diagnostics for card in PCI slot 00:11.6 ----> PCI: Enabling device 0000:00:11.6 (0000 -> 0001)> ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 19> PCI: Setting latency timer of device 0000:00:11.6 to 64> ACPI: PCI interrupt for device 0000:00:11.6 disabled> VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13> ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 19> PCI: Setting latency timer of device 0000:00:11.6 to 64> ACPI: PCI interrupt for device 0000:00:11.6 disabled> VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13> ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 19> PCI: Setting latency timer of device 0000:00:11.6 to 64> ACPI: PCI interrupt for device 0000:00:11.6 disabled> VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13>> The PCI slot 00:11.6 of the modem card may be disabled early in> a bootup process, but then enabled later. If modem drivers load> but the modem is not responsive, read Bootup.txt about possible fixes.> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx> if help is needed.>> For the>> 00:11.6 1106:3068 Communication controller: VIA> Technologies, Inc. AC'97 Modem Controller>> http://linmodems.technion.ac.il/packages/smartlink/SLMODEMD.gcc4.1.tar.gz> should serve, but you should take care of the IRQ problems. Also you> are encouraged to update to a more recent kernel as the one that you> run is old and buggy. I am CCing this to Marv so he can give you> better directions.>> Regards,>> Antonio>>>>> On 11/7/07, Zoran Mrkšić <mrzox@xxxxxxxxxxxx> wrote:> >> >> >> > CPU0> > 0: 182 IO-APIC-edge timer> > 1: 1588 IO-APIC-edge i8042> > 6: 6 IO-APIC-edge floppy> > 7: 0 IO-APIC-edge parport0> > 8: 1 IO-APIC-edge rtc> > 9: 0 IO-APIC-fasteoi acpi> > 12: 253110 IO-APIC-edge i8042> > 14: 53886 IO-APIC-edge libata> > 15: 0 IO-APIC-edge libata> > 16: 0 IO-APIC-fasteoi uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, ehci_hcd:usb5> > 17: 0 IO-APIC-fasteoi libata> > 19: 631 IO-APIC-fasteoi VIA8237> > NMI: 0> > LOC: 451011> > ERR: 0> > MIS: 0> >> > Linux version 2.6.21-1.3194.fc7 (kojibuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:35:01 EDT 2007> > BIOS-provided physical RAM map:> > sanitize start> > sanitize end> > copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1> > copy_e820_map() type is E820_RAM> > copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2> > copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2> > copy_e820_map() start: 0000000000100000 size: 000000001fe30000 end: 000000001ff30000 type: 1> > copy_e820_map() type is E820_RAM> > copy_e820_map() start: 000000001ff30000 size: 0000000000010000 end: 000000001ff40000 type: 3> > copy_e820_map() start: 000000001ff40000 size: 00000000000b0000 end: 000000001fff0000 type: 4> > copy_e820_map() start: 000000001fff0000 size: 0000000000010000 end: 0000000020000000 type: 2> > copy_e820_map() start: 00000000ff7c0000 size: 0000000000840000 end: 0000000100000000 type: 2> > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)> > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)> > BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)> > BIOS-e820: 0000000000100000 - 000000001ff30000 (usable)> > BIOS-e820: 000000001ff30000 - 000000001ff40000 (ACPI data)> > BIOS-e820: 000000001ff40000 - 000000001fff0000 (ACPI NVS)> > BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)> > BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)> > 0MB HIGHMEM available.> > 511MB LOWMEM available.> > found SMP MP-table at 000ff780> > Using x86 segment limits to approximate NX protection> > Entering add_active_range(0, 0, 130864) 0 entries of 256 used> > Zone PFN ranges:> > DMA 0 -> 4096> > Normal 4096 -> 130864> > HighMem 130864 -> 130864> > early_node_map[1] active PFN ranges> > 0: 0 -> 130864> > On node 0 totalpages: 130864> > DMA zone: 32 pages used for memmap> > DMA zone: 0 pages reserved> > DMA zone: 4064 pages, LIFO batch:0> > Normal zone: 990 pages used for memmap> > Normal zone: 125778 pages, LIFO batch:31> > HighMem zone: 0 pages used for memmap> > DMI 2.3 present.> > Using APIC driver default> > ACPI: RSDP 000FA3A0, 0014 (r0 ACPIAM)> > ACPI: RSDT 1FF30000, 0030 (r1 A M I OEMRSDT 8000412 MSFT 97)> > ACPI: FACP 1FF30200, 0081 (r2 A M I OEMFACP 8000412 MSFT 97)> > ACPI Warning (tbfadt-0360): Ignoring BIOS FADT r2 C-state control [20070126]> > ACPI: DSDT 1FF303F0, 3586 (r1 A0017 A0017001 1 INTL 2002026)> > ACPI: FACS 1FF40000, 0040> > ACPI: APIC 1FF30390, 0052 (r1 A M I OEMAPIC 8000412 MSFT 97)> > ACPI: OEMB 1FF40040, 0040 (r1 A M I AMI_OEM 8000412 MSFT 97)> > ACPI: PM-Timer IO Port: 0x808> > ACPI: Local APIC address 0xfee00000> > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)> > Processor #0 15:2 APIC version 20> > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)> > ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])> > IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23> > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)> > ACPI: IRQ0 used by override.> > ACPI: IRQ2 used by override.> > ACPI: IRQ9 used by override.> > Enabling APIC mode: Flat. Using 1 I/O APICs> > Using ACPI (MADT) for SMP configuration information> > Allocating PCI resources starting at 30000000 (gap: 20000000:df7c0000)> > Built 1 zonelists. Total pages: 129842> > Kernel command line: ro root=LABEL=/1 rhgb quiet> > mapped APIC to ffffd000 (fee00000)> > mapped IOAPIC to ffffc000 (fec00000)> > Enabling fast FPU save and restore... done.> > Enabling unmasked SIMD FPU exception support... done.> > Initializing CPU#0> > CPU 0 irqstacks, hard=c077c000 soft=c075c000> > PID hash table entries: 2048 (order: 11, 8192 bytes)> > Detected 2266.687 MHz processor.> > Console: colour VGA+ 80x25> > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)> > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)> > Memory: 511380k/523456k available (2066k kernel code, 11624k reserved, 1092k data, 240k init, 0k highmem)> > virtual kernel memory layout:> > fixmap : 0xffc56000 - 0xfffff000 (3748 kB)> > pkmap : 0xff800000 - 0xffc00000 (4096 kB)> > vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)> > lowmem : 0xc0000000 - 0xdff30000 ( 511 MB)> > .init : 0xc071b000 - 0xc0757000 ( 240 kB)> > .data : 0xc0604a4a - 0xc0715cb4 (1092 kB)> > .text : 0xc0400000 - 0xc0604a4a (2066 kB)> > Checking if this processor honours the WP bit even in supervisor mode... Ok.> > Calibrating delay using timer specific routine.. 4537.59 BogoMIPS (lpj=2268799)> > Security Framework v1.0.0 initialized> > SELinux: Initializing.> > SELinux: Starting in permissive mode> > selinux_register_security: Registering secondary module capability> > Capability LSM initialized as secondary> > Mount-cache hash table entries: 512> > CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000> > CPU: Trace cache: 12K uops, L1 D cache: 8K> > CPU: L2 cache: 512K> > CPU: Hyper-Threading is disabled> > CPU: After all inits, caps: bfebf3ff 00000000 00000000 00003080 00004400 00000000 00000000> > Intel machine check architecture supported.> > Intel machine check reporting enabled on CPU#0.> > CPU0: Intel P4/Xeon Extended MCE MSRs (12) available> > CPU0: Thermal monitoring enabled> > Checking 'hlt' instruction... OK.> > SMP alternatives: switching to UP code> > Freeing SMP alternatives: 14k freed> > ACPI: Core revision 20070126> > CPU0: Intel(R) Pentium(R) 4 CPU 2.26GHz stepping 09> > Total of 1 processors activated (4537.59 BogoMIPS).> > ENABLING IO-APIC IRQs> > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1> > Brought up 1 CPUs> > sizeof(vma)=84 bytes> > sizeof(page)=32 bytes> > sizeof(inode)=336 bytes> > sizeof(dentry)=132 bytes> > sizeof(ext3inode)=488 bytes> > sizeof(buffer_head)=56 bytes> > sizeof(skbuff)=176 bytes> > sizeof(task_struct)=1376 bytes> > Time: 20:22:36 Date: 10/07/107> > NET: Registered protocol family 16> > ACPI: bus type pci registered> > PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1> > PCI: Using configuration type 1> > Setting up standard PCI resources> > ACPI: Interpreter enabled> > ACPI: (supports S0 S1 S3 S4 S5)> > ACPI: Using IOAPIC for interrupt routing> > ACPI: PCI Root Bridge [PCI0] (0000:00)> > PCI: Probing PCI hardware (bus 00)> > PCI: enabled onboard AC97/MC97 devices> > Boot video device is 0000:01:00.0> > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]> > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)> > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)> > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)> > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.> > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.> > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.> > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.> > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.> > Linux Plug and Play Support v0.97 (c) Adam Belay> > pnp: PnP ACPI init> > pnp: PnP ACPI: found 14 devices> > usbcore: registered new interface driver usbfs> > usbcore: registered new interface driver hub> > usbcore: registered new device driver usb> > PCI: Using ACPI for IRQ routing> > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report> > NetLabel: Initializing> > NetLabel: domain hash size = 128> > NetLabel: protocols = UNLABELED CIPSOv4> > NetLabel: unlabeled traffic allowed by default> > pnp: 00:09: iomem range 0xfec00000-0xfec00fff has been reserved> > pnp: 00:09: iomem range 0xfee00000-0xfee00fff has been reserved> > pnp: 00:09: iomem range 0xfff80000-0xffffffff could not be reserved> > pnp: 00:0c: ioport range 0x680-0x6ff has been reserved> > pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved> > pnp: 00:0d: iomem range 0xc0000-0xdffff could not be reserved> > pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved> > pnp: 00:0d: iomem range 0x100000-0x1ffeffff could not be reserved> > Time: tsc clocksource has been installed.> > PCI: Bridge: 0000:00:01.0> > IO window: disabled.> > MEM window: dd700000-df8fffff> > PREFETCH window: cd600000-dd5fffff> > PCI: Setting latency timer of device 0000:00:01.0 to 64> > NET: Registered protocol family 2> > IP route cache hash table entries: 4096 (order: 2, 16384 bytes)> > TCP established hash table entries: 16384 (order: 5, 196608 bytes)> > TCP bind hash table entries: 16384 (order: 5, 131072 bytes)> > TCP: Hash tables configured (established 16384 bind 16384)> > TCP reno registered> > checking if image is initramfs... it is> > Freeing initrd memory: 2812k freed> > apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)> > apm: overridden by ACPI.> > audit: initializing netlink socket (disabled)> > audit(1194466956.121:1): initialized> > Total HugeTLB memory allocated, 0> > VFS: Disk quotas dquot_6.5.1> > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)> > SELinux: Registering netfilter hooks> > ksign: Installing public key data> > Loading keyring> > - Added public key 65F8109C338BBD41> > - User ID: Red Hat, Inc. (Kernel Module GPG key)> > io scheduler noop registered> > io scheduler anticipatory registered> > io scheduler deadline registered> > io scheduler cfq registered (default)> > PCI: Bypassing VIA 8237 APIC De-Assert Message> > pci_hotplug: PCI Hot Plug PCI Core version: 0.5> > ACPI: Processor [CPU1] (supports 16 throttling states)> > ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]> > isapnp: Scanning for PnP cards...> > Switched to high resolution mode on CPU 0> > isapnp: No Plug & Play device found> > Real Time Clock Driver v1.12ac> > Non-volatile memory driver v1.2> > Linux agpgart interface v0.102 (c) Dave Jones> > agpgart: Detected VIA PT800 chipset> > agpgart: AGP aperture is 64M @ 0xe0000000> > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled> > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A> > 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A> > RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize> > input: Macintosh mouse button emulation as /class/input/input0> > usbcore: registered new interface driver libusual> > usbcore: registered new interface driver hiddev> > usbcore: registered new interface driver usbhid> > drivers/usb/input/hid-core.c: v2.6:USB HID core driver> > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12> > serio: i8042 KBD port at 0x60,0x64 irq 1> > serio: i8042 AUX port at 0x60,0x64 irq 12> > mice: PS/2 mouse device common for all mice> > input: AT Translated Set 2 keyboard as /class/input/input1> > TCP bic registered> > Initializing XFRM netlink socket> > NET: Registered protocol family 1> > NET: Registered protocol family 17> > Using IPI No-Shortcut mode> > Magic number: 15:500:396> > drivers/rtc/hctosys.c: unable to open rtc device (rtc0)> > Freeing unused kernel memory: 240k freed> > Write protecting the kernel read-only data: 820k> > USB Universal Host Controller Interface driver v3.0> > ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 16> > uhci_hcd 0000:00:10.0: UHCI Host Controller> > uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1> > uhci_hcd 0000:00:10.0: irq 16, io base 0x0000eec0> > usb usb1: configuration #1 chosen from 1 choice> > hub 1-0:1.0: USB hub found> > hub 1-0:1.0: 2 ports detected> > ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 16> > uhci_hcd 0000:00:10.1: UHCI Host Controller> > uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2> > uhci_hcd 0000:00:10.1: irq 16, io base 0x0000ef00> > usb usb2: configuration #1 chosen from 1 choice> > hub 2-0:1.0: USB hub found> > hub 2-0:1.0: 2 ports detected> > ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 16> > uhci_hcd 0000:00:10.2: UHCI Host Controller> > uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3> > uhci_hcd 0000:00:10.2: irq 16, io base 0x0000ef20> > usb usb3: configuration #1 chosen from 1 choice> > hub 3-0:1.0: USB hub found> > hub 3-0:1.0: 2 ports detected> > ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 16> > uhci_hcd 0000:00:10.3: UHCI Host Controller> > uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4> > uhci_hcd 0000:00:10.3: irq 16, io base 0x0000ef40> > usb usb4: configuration #1 chosen from 1 choice> > hub 4-0:1.0: USB hub found> > hub 4-0:1.0: 2 ports detected> > input: ImPS/2 Generic Wheel Mouse as /class/input/input2> > ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver> > ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 16> > ehci_hcd 0000:00:10.4: EHCI Host Controller> > ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5> > ehci_hcd 0000:00:10.4: irq 16, io mem 0xdfe00000> > ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004> > usb usb5: configuration #1 chosen from 1 choice> > hub 5-0:1.0: USB hub found> > hub 5-0:1.0: 8 ports detected> > SCSI subsystem initialized> > libata version 2.20 loaded.> > pata_via 0000:00:0f.1: version 0.2.1> > ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 17> > ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14> > ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15> > scsi0 : pata_via> > ata1.00: ata_hpa_resize 1: sectors = 160086528, hpa_sectors = 160086528> > ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133> > ata1.00: 160086528 sectors, multi 16: LBA> > ata1.01: ATAPI, max UDMA/66> > ata1.00: ata_hpa_resize 1: sectors = 160086528, hpa_sectors = 160086528> > ata1.00: configured for UDMA/133> > ata1.01: configured for UDMA/66> > scsi1 : pata_via> > ATA: abnormal status 0x8 on port 0x00010177> > scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5> > SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)> > sda: Write Protect is off> > sda: Mode Sense: 00 3a 00 00> > SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA> > SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)> > sda: Write Protect is off> > sda: Mode Sense: 00 3a 00 00> > SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA> > sda: sda1 sda2 < sda5 sda6 sda7 sda8 >> > sd 0:0:0:0: Attached scsi disk sda> > scsi 0:0:1:0: CD-ROM PIONEER DVD-RW DVR-112D 1.15 PQ: 0 ANSI: 5> > sata_via 0000:00:0f.0: version 2.1> > ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 17> > sata_via 0000:00:0f.0: routed to hard irq line 10> > ata3: SATA max UDMA/133 cmd 0x0001efe0 ctl 0x0001efae bmdma 0x0001ef90 irq 17> > ata4: SATA max UDMA/133 cmd 0x0001efa0 ctl 0x0001efaa bmdma 0x0001ef98 irq 17> > scsi2 : sata_via> > ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)> > ATA: abnormal status 0x7F on port 0x0001efe7> > scsi3 : sata_via> > ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)> > ATA: abnormal status 0x7F on port 0x0001efa7> > kjournald starting. Commit interval 5 seconds> > EXT3-fs: mounted filesystem with ordered data mode.> > audit(1194466965.620:2): enforcing=1 old_enforcing=0 auid=4294967295> > security: 3 users, 6 roles, 1816 types, 78 bools, 1 sens, 1024 cats> > security: 60 classes, 65638 rules> > SELinux: Completing initialization.> > SELinux: Setting up existing superblocks.> > SELinux: initialized (dev sda6, type ext3), uses xattr> > SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts> > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs> > SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts> > SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts> > SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs> > SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts> > SELinux: initialized (dev devpts, type devpts), uses transition SIDs> > SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs> > SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts> > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs> > SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts> > SELinux: initialized (dev pipefs, type pipefs), uses task SIDs> > SELinux: initialized (dev sockfs, type sockfs), uses task SIDs> > SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts> > SELinux: initialized (dev proc, type proc), uses genfs_contexts> > SELinux: initialized (dev bdev, type bdev), uses genfs_contexts> > SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts> > SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts> > audit(1194466966.120:3): policy loaded auid=4294967295> > sd 0:0:0:0: Attached scsi generic sg0 type 0> > scsi 0:0:1:0: Attached scsi generic sg1 type 5> > Floppy drive(s): fd0 is 1.44M> > FDC 0 is a post-1991 82077> > sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray> > Uniform CD-ROM driver Revision: 3.20> > sr 0:0:1:0: Attached scsi CD-ROM sr0> > input: PC Speaker as /class/input/input3> > via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker> > ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 18> > eth0: VIA Rhine II at 0xdff00000, 00:11:2f:da:c6:52, IRQ 18.> > eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000.> > parport: PnPBIOS parport detected.> > parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]> > ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 19> > PCI: Setting latency timer of device 0000:00:11.5 to 64> > codec_read: codec 0 is not valid [0x107e5370]> > codec_read: codec 0 is not valid [0x107e5370]> > codec_read: codec 0 is not valid [0x107e5370]> > codec_read: codec 0 is not valid [0x107e5370]> > PCI: Enabling device 0000:00:11.6 (0000 -> 0001)> > ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 19> > audit(1194463376.521:4): avc: denied { search } for pid=1001 comm="salsa" name="root" dev=sda6 ino=1820673 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir> > audit(1194463376.521:5): avc: denied { search } for pid=1007 comm="salsa" name="root" dev=sda6 ino=1820673 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir> > audit(1194463376.521:6): avc: denied { search } for pid=1003 comm="salsa" name="root" dev=sda6 ino=1820673 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir> > audit(1194463376.521:7): avc: denied { search } for pid=1000 comm="salsa" name="root" dev=sda6 ino=1820673 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir> > audit(1194463376.521:8): avc: denied { search } for pid=1004 comm="salsa" name="root" dev=sda6 ino=1820673 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir> > audit(1194463376.521:9): avc: denied { search } for pid=1003 comm="alsactl" name="root" dev=sda6 ino=1820673 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir> > audit(1194463376.521:10): avc: denied { search } for pid=1000 comm="alsactl" name="root" dev=sda6 ino=1820673 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir> > audit(1194463376.521:11): avc: denied { search } for pid=1004 comm="alsactl" name="root" dev=sda6 ino=1820673 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir> > audit(1194463376.521:12): avc: denied { search } for pid=1001 comm="alsactl" name="root" dev=sda6 ino=1820673 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir> > audit(1194463376.521:13): avc: denied { search } for pid=1007 comm="alsactl" name="root" dev=sda6 ino=1820673 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir> > PCI: Setting latency timer of device 0000:00:11.6 to 64> > ACPI: PCI interrupt for device 0000:00:11.6 disabled> > VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13> > loop: loaded (max 8 devices)> > lp0: using parport0 (interrupt-driven).> > lp0: console ready> > sonypi: Sony Programmable I/O Controller Driver v1.26.> > SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts> > NET: Registered protocol family 10> > lo: Disabled Privacy Extensions> > Mobile IPv6> > ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20> > BUG: warning at kernel/softirq.c:138/local_bh_enable() (Not tainted)> > [<c042b0cf>] local_bh_enable+0x45/0x92> > [<c06002bd>] cond_resched_softirq+0x2c/0x42> > [<c059adf3>] release_sock+0x4f/0x9d> > [<c05c670d>] tcp_sendmsg+0x90b/0x9f9> > [<c05dec95>] inet_sendmsg+0x3b/0x45> > [<c0598731>] sock_aio_write+0xf6/0x102> > [<c04754ee>] do_sync_write+0xc7/0x10a> > [<c0436e71>] autoremove_wake_function+0x0/0x35> > [<c0475d47>] vfs_write+0xbc/0x154> > [<c0476342>] sys_write+0x41/0x67> > [<c0404f70>] syscall_call+0x7/0xb> > [<c0600000>] __sched_text_start+0x6e8/0x89e> > =======================> > audit(1194463384.020:14): avc: denied { search } for pid=1088 comm="rhgb" name="root" dev=sda6 ino=1820673 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir> > audit(1194463384.020:15): avc: denied { search } for pid=1088 comm="rhgb" name="root" dev=sda6 ino=1820673 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir> > audit(1194463384.020:16): avc: denied { search } for pid=1088 comm="rhgb" name="root" dev=sda6 ino=1820673 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir> > audit(1194463384.020:17): avc: denied { search } for pid=1088 comm="rhgb" name="root" dev=sda6 ino=1820673 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir> > audit(1194463384.020:18): avc: denied { search } for pid=1088 comm="rhgb" name="root" dev=sda6 ino=1820673 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir> > audit(1194463384.020:19): avc: denied { search } for pid=1088 comm="rhgb" name="root" dev=sda6 ino=1820673 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir> > audit(1194463384.020:20): avc: denied { search } for pid=1088 comm="rhgb" name="root" dev=sda6 ino=1820673 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir> > audit(1194463384.020:21): avc: denied { search } for pid=1088 comm="rhgb" name="root" dev=sda6 ino=1820673 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir> > audit(1194463384.020:22): avc: denied { search } for pid=1088 comm="rhgb" name="root" dev=sda6 ino=1820673 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir> > audit(1194463384.020:23): avc: denied { search } for pid=1088 comm="rhgb" name="root" dev=sda6 ino=1820673 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir> > audit(1194463386.020:24): avc: denied { search } for pid=1088 comm="rhgb" name="root" dev=sda6 ino=1820673 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir> > No dock devices found.> > input: Power Button (FF) as /class/input/input4> > ACPI: Power Button (FF) [PWRF]> > input: Power Button (CM) as /class/input/input5> > ACPI: Power Button (CM) [PWRB]> > input: Sleep Button (CM) as /class/input/input6> > ACPI: Sleep Button (CM) [SLPB]> > ibm_acpi: ec object not found> > device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@xxxxxxxxxx> > device-mapper: multipath: version 1.0.5 loaded> > EXT3 FS on sda6, internal journal> > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs> > Adding 1044184k swap on /dev/sda7. Priority:-1 extents:1 across:1044184k> > SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts> > IA-32 Microcode Update Driver: v1.14a <tigran@xxxxxxxxxxxxxxxxxxxx>> > ip6_tables: (C) 2000-2006 Netfilter Core Team> > ip_tables: (C) 2000-2006 Netfilter Core Team> > Netfilter messages via NETLINK v0.30.> > nf_conntrack version 0.5.0 (4089 buckets, 32712 max)> > eth0: link down> > ADDRCONF(NETDEV_UP): eth0: link is not ready> > audit(1194463399.518:25): audit_pid=1753 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0> > SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts> > SELinux: initialized (dev autofs, type autofs), uses genfs_contexts> > SELinux: initialized (dev autofs, type autofs), uses genfs_contexts> > SELinux: initialized (dev autofs, type autofs), uses genfs_contexts> > SELinux: initialized (dev sda8, type vfat), uses genfs_contexts> > ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 19> > PCI: Setting latency timer of device 0000:00:11.6 to 64> > ACPI: PCI interrupt for device 0000:00:11.6 disabled> > VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13> > ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 19> > PCI: Setting latency timer of device 0000:00:11.6 to 64> > ACPI: PCI interrupt for device 0000:00:11.6 disabled> > VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13> >> > Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,> > as HTML can contain viruses. Use as the email Subject Line:> > YourName, YourCountry Fedora release 7 (Moonshine)> > Kernel kernel 2.6.21-1.3194.fc7> > With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.> > YourCountry will enable Country specific guidance. Your contry's local Linux experts> > can be found through: http://www.linux.org/groups/index.html> > Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.> > So in a day, also check the Archived responses at http://www.linmodems.org> > -------------------------- System information ----------------------------> > CPU=i686, Fedora release 7 (Moonshine)> > Kernel> > Linux version 2.6.21-1.3194.fc7 (kojibuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:35:01 EDT 2007> > scanModem update of: 20071030> >> >> > There are no blacklisted modem drivers in /etc/modprobe* files> >> > Potentially useful modem drivers now loaded are:> > snd_via82xx_modem> >> >> > The Advanced Linux Sound Architecture (ALSA) packages providing audio support on your System,> > also includes drivers for some modems. Diagnostics are under the /proc/asound/ folders.> >> > For modems using the snd-hda-intel audio+modem driver, upgrades to> > a new ALSA version are sometimes necessary to achieve function.> > See for example:> > http://linmodems.technion.ac.il/bigarch/archive-seventh/msg02144.html.> > Audio cards with the ALC883 chipset may require an upgrade to ALSA version 1.0.15 for modem support, see> > http://linmodems.technion.ac.il/bigarch/archive-seventh/msg02577.html> >> > Copying ALSA diagnostics to Modem/ALSAroot.tgz> > ALSAversion = 1.0.14rc2> >> > Summary card and chipset information is in:> > /proc/asound/cards:> > 0 [V8237 ]: VIA8237 - VIA 8237> > VIA 8237 with AD1980 at 0xe000, irq 19> >> > /proc/asound/pcm:> > 00-01: VIA 8237 : VIA 8237 : playback 1 : capture 1> > 00-00: VIA 8237 : VIA 8237 : playback 4 : capture 1> >> > USB modem not detected by lsusb> >> > For candidate card, firmware information and bootup diagnostics are:> >> > PCI slot PCI ID SubsystemID Name> > ---------- --------- --------- --------------> > 00:0c.0 11c1:048c 11c1:044c Communication controller: Agere Systems V.92 56K WinModem> >> > Modem interrupt assignment and sharing:> > --- Bootup diagnostics for card in PCI slot 00:0c.0 ----> > For candidate card, firmware information and bootup diagnostics are:> >> > PCI slot PCI ID SubsystemID Name> > ---------- --------- --------- --------------> > 00:11.6 1106:3068 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller> >> > Modem interrupt assignment and sharing:> > 19: 631 IO-APIC-fasteoi VIA8237> > --- Bootup diagnostics for card in PCI slot 00:11.6 ----> > PCI: Enabling device 0000:00:11.6 (0000 -> 0001)> > ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 19> > PCI: Setting latency timer of device 0000:00:11.6 to 64> > ACPI: PCI interrupt for device 0000:00:11.6 disabled> > VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13> > ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 19> > PCI: Setting latency timer of device 0000:00:11.6 to 64> > ACPI: PCI interrupt for device 0000:00:11.6 disabled> > VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13> > ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 19> > PCI: Setting latency timer of device 0000:00:11.6 to 64> > ACPI: PCI interrupt for device 0000:00:11.6 disabled> > VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13> >> > The PCI slot 00:11.6 of the modem card may be disabled early in> > a bootup process, but then enabled later. If modem drivers load> > but the modem is not responsive, read Bootup.txt about possible fixes.> > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx> > if help is needed.> >> >> > === Finished modem firmware and bootup diagnostics section. ===> > === Next deducing cogent software ===> >> > PCIbus=00:11.6> > 00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)> > Flags: medium devsel, IRQ 19> > I/O ports at 1000 [size=256]> > Capabilities: [d0] Power Management version 2> >> >> >> > Modem not detected though HDA card diagnostics, though not excluding> > a possible Conexant modem chip impervious to ALSA diagnostics.> > Proceeding through alternative possibilties.> >> >> > There is candidate modem software.> >> > Completed candidate modem analyses.> >> > The base of the UDEV device file system is: /dev/.udev> >> > Versions adequately match for the compiler installed: 4.1.2> > and the compiler used in kernel assembly: 4.1.2> >> >> >> > Minimal compiling resources appear complete:> > make utility - /usr/bin/make> > Compiler version 4.1> > linuc_headers base folder /lib/modules/2.6.21-1.3194.fc7/build> >> > However some compilations and executable functions may need additional files,> > in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .> > For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu, linux-libc-dev). The also required headers of package libc6 are commonly installed by default.> >> >> >> > If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then> > Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev> > and any of its dependents, under Ubuntu linux-libc-dev> >> > If an alternate ethernet connection is available,> > $ apt-get update> > $ apt-get -s install linux-kernel-devel> > will install needed pacakage> > For Debian/Ubuntu related distributions, run the following command to display the needed package list:> >> > Otherwise packages have to be found through http://packages.ubuntu.com> > Once downloaded and transferred into a Linux partition,> > they can be installed alltogether with:> > $ sudo dpkg -i *.deb> >> >> > Checking pppd properties:> > -r-xr-xr-x 1 root root 312332 Dec 1 2006 /usr/sbin/pppd> >> > In case of an "error 17" "serial loopback" problem, see:> > http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html> >> > To enable dialout without Root permission do:> > $ su - root (not for Ubuntu)> > chmod a+x /usr/sbin/pppd> > or under Ubuntu related Linuxes> > chmod a+x /usr/sbin/pppd> >> > Checking settings of: /etc/ppp/options> > lock> >> > In case of a message like:> > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied> > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html> >> >> > Don't worry about the following, it is for the experts> > should trouble shooting be necessary.> > ==========================================================> >> > Checking for modem support lines:> > --------------------------------------> > /device/modem symbolic link:> > slmodemd created symbolic link /dev/ttySL0:> > Within /etc/udev/ files:> > /etc/udev/rules.d/50-udev.rules:KERNEL=="modems/mwave*", NAME="%k", GROUP="uucp", MODE="0660"> > Within /etc/modprobe.conf files:> >> > Within any ancient /etc/devfs files:> >> > Within ancient kernel 2.4.n /etc/module.conf files:> >> > --------- end modem support lines --------> >> >> >>
