Re: new softmodem case - modemdata text

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks
If this is for information, thank you very much for your contribution.
If you need the corresponding driver, follow the pointer in ModemData.txt for the Linuxant HSF driver.

Jacques

IT Desk wrote:
Heres' a new softmodem case.  Full contents of ModemData.txt follow:

Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server.
 Do use the following as the email Subject Line:
           SomeName, YourCountry
Welcome to SUSE LINUX 10.1 (X86-64) - Kernel  kernel 2.6.16.13-4-smp
 This will alert cogent experts, and  distinguish cases in the Archives.
 YourCountry will enable Country Code guidance.
 Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org . Local Linux experts can be found through: http://www.linux.org/groups/index.html
--------------------------  System information ----------------------------
CPU=x86_64,
Welcome to SUSE LINUX 10.1 (X86-64) - Kernel
Linux version 2.6.16.13-4-smp (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 SMP Wed May 3 04:53:23 UTC 2006
 scanModem update of:  2007_Oct_07


 There are no blacklisted modem drivers in /etc/modprobe*  files
USB modem not detected by lsusb


Several modems are supported by drivers with ALSA, the Advanced Linux Sound Architecture software.
Copying ALSA diagnostics to Modem/ALSAroot.tgz
ALSAversion = 1.0.11rc2

Modem or candidate host audio card have firmware information and diagnostics:

 PCI slot    PCI ID        SubsystemID    Name
 ----------    ---------    ---------    --------------
00:1b.0 8086:284b 1028:0227 Audio device: Intel Corporation HD Audio Controller

 Modem interrupt assignment and sharing:
66: 21652 0 IO-APIC-level uhci_hcd:usb2, uhci_hcd:usb4, HDA Intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1b.0 to 64

 === Finished modem firmware and bootup diagnostics section. ===
 === Next deducing cogent software ===

The High Defintion Audio card with PCI ID 8086:284b may host a soft modem chip.
8086:284b is a High Definition Audio card, possibly hosting a soft modem.
Bootup diagnostics lack ALSA data.

 The HDA modem codec file is: /proc/asound/card0/codec#1
-----------------------------------
Codec: Generic 14f1 ID 2c06
Address: 1
Vendor Id: 0x14f12c06
Subsystem Id: 0x14f1000f
Revision Id: 0x100000

 The audio card hosts a softmodem chip with Vendor ID:  0x14f12c06

 14f1 is the Conexant Vendor ID, and 0x14f12c06 a softmodem chipset.
 Get a hsfmodem package through http://www.linuxant.com

 For candidate modem in PCI bus:  00:1b.0
Class 0403: 8086:284b Audio device: Intel Corporation HD Audio Controller
      Primary PCI_id  8086:284b
    Subsystem PCI_id  1028:0227
    Softmodem codec or Vendor from diagnostics: 14f1, a Conexant type,
                              from    Archives:


 This is a NEW softmodem case!  Please send the output ModemData.txt
 to DISCUSS@xxxxxxxxxxxxx to enrich the Archive and help others!
 If further assistance is not needed, please use email Subject:
     New Case Only
 -------------------------------------------
 Lacking a dsp (digital signal processing) chip, the modem is a software
 intensive or "softmodem" type. Its primary controller manages the traffic
 with the CPU. But the software needed is specified in the Subsystem.
 -----------------------------------------
Support type needed or chipset:    hsfmodem


Writing Intel.txt

For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read Conexant.txt

 The hsfmodem package serves a great variety of Conexant chipset modems.
 Start at  http://www.linuxant.com/drivers/hsf for
 eventually download of a hsfmodem-SomeVersion.zip  package with
SomeVersion containing your kernel_version 2.6.16.13-4-smp in the filename if possible.
 These packages have compiled drivers. Otherwise download the generic
 hsfmodem-Version.tar.gz  package. Its usage will require compiling.

 Read Conexant.txt

Writing Conexant.txt


 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

The kernel was compiled with gcc version 4.1.0 and a compiler is not installed

linux-headers-2.6.16.13-4-smp resources needed for compiling are not manifestly ready!

 If compiling is necessary packages must be installed, providing:
    gcc-4.1  kernel-source-2.6.16.13-4-smp


If a driver compilation files with message including some lack of some FileName.h (stdio.h for example.
Some additional kernel-header files need installation to /usr/include.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
$ sudo apt-get -s install linux-kernel-devel
While some of the files may be on the install CD, others may have to be found through http://packages.ubuntu.com

For Ubuntu Feisty, additional packages required were:
 libc6-dev linux-libc-dev
available through http://packages.ubuntu.com/ , if not on the install CD.
Such packages may have different names for other Linux distributions.
Try installing just the libc6-dev, then test the compile again.


Checking pppd properties:
    -rwxr-xr-x 1 root dialout 336960 2006-04-22 20:07 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
    $ su - root  (not for Ubuntu)
         chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
     chmod a+x /usr/sbin/pppd

Checking settings of:    /etc/ppp/options
noipdefault
noauth
crtscts
lock
modem
asyncmap 0
nodetach
lcp-echo-interval 30
lcp-echo-failure 4
lcp-max-configure 60
lcp-restart 2
idle 600
noipx
file /etc/ppp/filters

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html


 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
     Within /etc/udev/ files:
/etc/udev/rules.d/31-network.rules:SUBSYSTEM=="net", ENV{INTERFACE}=="ppp*|ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*|bond*|vlan*|modem*", GOTO="skip_ifup" /etc/udev/rules.d/50-udev-default.rules:KERNEL=="modems/mwave*", NAME="%k", GROUP="uucp" /etc/udev/rules.d/50-udev-default.rules:# 219 /dev/modems/mwave MWave modem firmware upload /etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave", NAME="modems/%k"
     Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist:# ALSA PCI sound/modem modules - should be configured via yast
/etc/modprobe.d/blacklist:blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist:blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux