new softmodem case - modemdata text

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Heres' a new softmodem case.  Full contents of ModemData.txt follow:

Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server.
 Do use the following as the email Subject Line:
           SomeName, YourCountry
Welcome to SUSE LINUX 10.1 (X86-64) - Kernel  kernel 2.6.16.13-4-smp
 This will alert cogent experts, and  distinguish cases in the Archives.
 YourCountry will enable Country Code guidance.
 Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org . Local Linux experts can be found through: http://www.linux.org/groups/index.html
--------------------------  System information ----------------------------
CPU=x86_64,
Welcome to SUSE LINUX 10.1 (X86-64) - Kernel
Linux version 2.6.16.13-4-smp (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 SMP Wed May 3 04:53:23 UTC 2006
 scanModem update of:  2007_Oct_07


 There are no blacklisted modem drivers in /etc/modprobe*  files
USB modem not detected by lsusb


Several modems are supported by drivers with ALSA, the Advanced Linux Sound Architecture software.
Copying ALSA diagnostics to Modem/ALSAroot.tgz
ALSAversion = 1.0.11rc2

Modem or candidate host audio card have firmware information and diagnostics:

 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
00:1b.0 8086:284b 1028:0227 Audio device: Intel Corporation HD Audio Controller

 Modem interrupt assignment and sharing:
66: 21652 0 IO-APIC-level uhci_hcd:usb2, uhci_hcd:usb4, HDA Intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1b.0 to 64

 === Finished modem firmware and bootup diagnostics section. ===
 === Next deducing cogent software ===

The High Defintion Audio card with PCI ID 8086:284b may host a soft modem chip.
8086:284b is a High Definition Audio card, possibly hosting a soft modem.
Bootup diagnostics lack ALSA data.

 The HDA modem codec file is: /proc/asound/card0/codec#1
-----------------------------------
Codec: Generic 14f1 ID 2c06
Address: 1
Vendor Id: 0x14f12c06
Subsystem Id: 0x14f1000f
Revision Id: 0x100000

 The audio card hosts a softmodem chip with Vendor ID:  0x14f12c06

 14f1 is the Conexant Vendor ID, and 0x14f12c06 a softmodem chipset.
 Get a hsfmodem package through http://www.linuxant.com

 For candidate modem in PCI bus:  00:1b.0
Class 0403: 8086:284b Audio device: Intel Corporation HD Audio Controller
      Primary PCI_id  8086:284b
    Subsystem PCI_id  1028:0227
    Softmodem codec or Vendor from diagnostics: 14f1, a Conexant type,
                              from    Archives:


 This is a NEW softmodem case!  Please send the output ModemData.txt
 to DISCUSS@xxxxxxxxxxxxx to enrich the Archive and help others!
 If further assistance is not needed, please use email Subject:
     New Case Only
 -------------------------------------------
 Lacking a dsp (digital signal processing) chip, the modem is a software
 intensive or "softmodem" type. Its primary controller manages the traffic
 with the CPU. But the software needed is specified in the Subsystem.
 -----------------------------------------
Support type needed or chipset:	hsfmodem


Writing Intel.txt

For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read Conexant.txt

 The hsfmodem package serves a great variety of Conexant chipset modems.
 Start at  http://www.linuxant.com/drivers/hsf for
 eventually download of a hsfmodem-SomeVersion.zip  package with
SomeVersion containing your kernel_version 2.6.16.13-4-smp in the filename if possible.
 These packages have compiled drivers. Otherwise download the generic
 hsfmodem-Version.tar.gz  package. Its usage will require compiling.

 Read Conexant.txt

Writing Conexant.txt


 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

The kernel was compiled with gcc version 4.1.0 and a compiler is not installed

linux-headers-2.6.16.13-4-smp resources needed for compiling are not manifestly ready!

 If compiling is necessary packages must be installed, providing:
	gcc-4.1  kernel-source-2.6.16.13-4-smp


If a driver compilation files with message including some lack of some FileName.h (stdio.h for example.
Some additional kernel-header files need installation to /usr/include.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
$ sudo apt-get -s install linux-kernel-devel
While some of the files may be on the install CD, others may have to be found through http://packages.ubuntu.com

For Ubuntu Feisty, additional packages required were:
 libc6-dev linux-libc-dev
available through http://packages.ubuntu.com/ , if not on the install CD.
Such packages may have different names for other Linux distributions.
Try installing just the libc6-dev, then test the compile again.


Checking pppd properties:
	-rwxr-xr-x 1 root dialout 336960 2006-04-22 20:07 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
         chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	 chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
noipdefault
noauth
crtscts
lock
modem
asyncmap 0
nodetach
lcp-echo-interval 30
lcp-echo-failure 4
lcp-max-configure 60
lcp-restart 2
idle 600
noipx
file /etc/ppp/filters

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html


 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
     Within /etc/udev/ files:
/etc/udev/rules.d/31-network.rules:SUBSYSTEM=="net", ENV{INTERFACE}=="ppp*|ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*|bond*|vlan*|modem*", GOTO="skip_ifup" /etc/udev/rules.d/50-udev-default.rules:KERNEL=="modems/mwave*", NAME="%k", GROUP="uucp" /etc/udev/rules.d/50-udev-default.rules:# 219 /dev/modems/mwave MWave modem firmware upload
/etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave",		NAME="modems/%k"
     Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist:# ALSA PCI sound/modem modules - should be configured via yast
/etc/modprobe.d/blacklist:blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist:blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux