Robikhun,
1-I assume that you knew what you were doing when selecting the driver
file which you installed. Have you used scanModem, read ModemData.txt,
and followed the instructions therein? If yes, then please send us the
file ModemData.txt. If not, then please use scanModem now:
http://linmodems.technion.ac.il/scanModem
2-Your log is not usable because it only shows one command, slmodemd.
slmodemd does not dial. Your log reports a dial. We cannot guess what
you did in between.
If you did not use wvdial to try to start the connection but something
else, read http://linmodems.technion.ac.il/wvdial.html because using
wvdial gives a complete report making it possible to locate where the
problem occurs.
3-PLEASE do not ask for a mail receipt when writing to this discussion
list in particular, and actually to any such list.
Receipts are often used by hackers, please do not help them.
Many people automatically throw away mails containing such a request.
Finally, our time too is important.
Thanks - Jacques
Robikhun (robihun) wrote:
I'm newbie to Linux. I just installed ubuntu 7.04 in my laptop 2 weeks
ago.
No I try to connect to internet through dial up but I have this problem
I have installed slmodemd and tested It seem OK but when I tried to dial
I got message NO CARRIER.
Please advice to solve this problem.
Thanks
This is the log
$ sudo slmodemd --alsa -c INDONESIA --debug --log hw:0,6
SmartLink Soft Modem: version 2.9.11 Aug 6 2007 22:02:27
<259.111997> SmartLink Soft Modem: version 2.9.11 Aug 6 2007 22:02:27
<259.112278> hw:0,6: startup modem...
<259.112479> hw:0,6: update termios...
symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
modem `hw:0,6' created. TTY is `/dev/pts/1'
<259.113506> open file: /var/lib/slmodem/data.hw:0,6...
<259.113618> cannot open '/var/lib/slmodem/data.hw:0,6': No such file or
directory
<259.114831> main: rt applyed: SCHED_FIFO, pri 99
Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
<275.289369> main: termios changed.
<275.289439> hw:0,6: update termios...
<275.366420> main: termios changed.
<275.366490> hw:0,6: update termios...
<275.466172> hw:0,6: run cmd: ATZ
<275.466246> hw:0,6: modem reset...
<275.466272> hw:0,6: modem set state: 1 --> 1...
<275.466299> hw:0,6: modem set mode: -> 0...
<275.466324> hw:0,6: modem report result: 0 (OK)
<275.566310> hw:0,6: run cmd: ATQ0V1E1S0=0&C1&D2+FCLASS=0
<275.566388> hw:0,6: modem set mode: -> 0...
<275.566415> hw:0,6: modem report result: 0 (OK)
<275.666380> hw:0,6: run cmd: ATDT92080989999
<275.666458> hw:0,6: modem dial: T92080989999...
<275.666485> hw:0,6: modem_dial_start...
<275.667480> hw:0,6: modem_start..
<275.667509> hw:0,6: modem set state: 1 --> 2...
<275.667535> hw:0,6: new state: DP_ESTAB
<275.667559> main: alsa_ioctl: cmd 8, arg 3...
<275.667584> hw:0,6: modem set hook: 0 --> 1...
<275.667608> main: alsa_ioctl: cmd 2, arg 1...
<275.674089> main: alsa_ioctl: cmd 11, arg 0...
<275.674257> main: alsa_ioctl: cmd 4, arg 2580...
<275.674285> main: alsa_ioctl: cmd 7, arg 30...
<275.674310> main: alsa_start...
error: cannot setup hw params for playback: Invalid argument
<275.674571> err: hw:0,6: modem start = -22: cannot start device.
<275.674601> hw:0,6: modem_stop..
<275.674625> hw:0,6: modem set hook: 1 --> 0...
<275.674650> main: alsa_ioctl: cmd 2, arg 0...
<275.682105> main: alsa_ioctl: cmd 8, arg 0...
<275.682310> hw:0,6: modem set state: 2 --> 1...
<275.682336> hw:0,6: new state: MODEM_IDLE
<275.682361> hw:0,6: modem report result: 3 (NO CARRIER)
<275.682397> hw:0,6: modem report result: 4 (ERROR)
<275.862798> main: termios changed.
<275.862857> hw:0,6: update termios...
<275.862886> main: pty closed.
<328.043021> main: signal 2: mark termination.
<328.043131> hw:0,6: modem_delete...
