Re: scanModem, Ubuntu 7.04 kernel 2.6.20-16-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



For candidate modem in PCI bus:  00:1b.0
   Class 0403: 8086:27d8 Audio device: Intel Corporation 82801G
      Primary PCI_id  NEW_softmodem_8086:27d8
Support type needed or chipset:    slmodemd

An ALSA (Advanced Linux Sound Architecture) modem driver:  snd-hda-intel
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility:  slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/ 
the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack under Linux with:
    $ tar zxf SLMODEMD.gcc4.1.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
    sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6 
reporting dynamic creation of ports:
    /dev/ttySL0 --> /dev/pts/N   , with N some number
Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.

Regards,

Antonio 

----- Original Message ----
From: OOzy Pal <oozypal@xxxxxxxxx>
To: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
Cc: discuss@xxxxxxxxxxxxx
Sent: Wednesday, September 26, 2007 2:26:09 PM
Subject: Re: scanModem, Ubuntu 7.04 kernel 2.6.20-16-generic


Dear Marvin,

Oooops, it makes a lot of difference if a newer version of scanModem is used :).

Attached the my Modem Data

Thank you,

On 9/26/07, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
> OOzy
>
> Your modem is likely a Subsystem in
> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
> Definition Audio Controller (rev 02)
>
>  But Update=2005_April_19 is ancient, and does parse
>  High Definition Audio Controllers
>
>  Browse http://linmodems.technion.ac.il   and
>  download the current scanModem.gz . Within a Linux partition
>     gunzip scanModem.gz
>  To make it executable:
>     chmod +x scanModem
>  Run diagnositics with:
>     ./scanModem
> Only the ouput ModemData.txt should be sent to Discuss@xxxxxxxxxxxxx
>
> MarvS
>
> On 9/25/07, OOzy Pal <oozypal@xxxxxxxxx> wrote:
> > Hello,
> >
> > I have used scanModem and bellow is my output. I am really not sure what to do:
> > __________________
> >
> > ------------ --------------  System information ------------------------
> > Ubuntu 7.04
> >  on System with processor: i686
> >  currently under kernel:   2.6.20-16-generic
> >  The kernel was assembled with compiler:  4.1.2
> >  with current System compiler GCC=4.1.2
> >     /usr/bin/gcc -> gcc-4.1
> >
> > Checking for kernel-headers needed for compiling.
> >
> >  A /dev/modem symbolic link is not set.
> >  Checking for USB modems
> >  None found
> > --------- lspci scan ----------------
> >  PCI_bus
> > 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and
> > 945GT Express Memory Controller Hub (rev 03)
> > 00:02.0 VGA compatible controller: Intel Corporation Mobile
> > 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
> > 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML
> > Express Integrated Graphics Controller (rev 03)
> > 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
> > Definition Audio Controller (rev 02)
> > 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
> > Port 1 (rev 02)
> > 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
> > Port 2 (rev 02)
> > 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
> > Port 3 (rev 02)
> > 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
> > UHCI #1 (rev 02)
> > 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
> > UHCI #2 (rev 02)
> > 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
> > UHCI #3 (rev 02)
> > 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
> > UHCI #4 (rev 02)
> > 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2
> > EHCI Controller (rev 02)
> > 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
> > 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface
> > Bridge (rev 02)
> > 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family)
> > Serial ATA Storage Controller IDE (rev 02)
> > 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
> > 05:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG
> > Network Connection (rev 02)
> > 07:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
> > 07:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant
> > IEEE 1394 Host Controller
> > 07:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia
> > Card Reader (SD/MMC/MS/MS PRO/xD)
> > 07:06.3 Generic system peripheral [0805]: Texas Instruments PCIxx12
> > SDA Standard Compliant SD Host Controller
> > 07:08.0 Ethernet controller: Intel Corporation PRO/100 VE Network
> > Connection (rev 02)
> > -------------------------------------
> >
> >  A modem was not detected among the above PCI devices.
> >  This indicates that the modem, if present has a non-standard or ISA bridge.
> >  Please follow the directions in Modem/General.txt for identifying the
> > modem properties
> >  when booting under Microsoft Windows. Also access any documentation sources
> >  on yourchipset.  Guidance can only be provided AFTER
> >  the chipset and/or its drivers have been identified.
> >
> >   ======= PCI_ID checking completed ======
> >  Update=2005_April_19
> >
> > Analyzing information for PCMCIA device at PCI Bus 07:06.0
> > GREPping for an inserted PCMCIA modem with filter:        ommunication
> >  If a PCMCIA modem is currently inserted and the sockets activated by
> >     /etc/init.d/pcmcia start
> >  then the PCMCIA bridge is NOT transparent.
> >
> >  If the modem is known to have a Lucent digital signal processing chipset,
> >  then PCMCIA.tar.gz variant assembled by Joern Wustenfeld is necessary,
> >  rather than the standard ltmodem-8.31a9.tar.gz at  http://ltmodem.heby.de/
> >
> > For information on modem port creation under the UDEV device file system see:
> >    http://linmodems.technion.ac.il/archive-fourth/msg03299.html  for
> > Conexnant modems
> >    http://linmodems.technion.ac.il/archive-fifth/msg01177.html  for
> > Lucent/Agere DSP modems
> >
> > The following information blocks just query some ppp support items.
> >
> > ====================================================
> >    grep -rs ppp /etc/modprobe.*
> > -------------------------------------
> > /etc/modprobe.d/aliases:alias net-pf-24 pppoe
> > -------------------------------------
> >  Resident PPP support modules are properly uncompressed .
> > ----active COMM services are ------------
> > eth0      Link encap:Ethernet  HWaddr 00:A0:D1:4B:BC:23
> >           inet6 addr: fe80::2a0:d1ff:fe4b:bc23/64 Scope:Link
> > This COMM mode should be closed before using the modem, or DNS
> > services may fail.
> > Be sure to read the section about ppp related modules and aliases in
> > Modem/General.txt
> >  Be sure to read the Ethernet section of Modem/General.txt
> > DEVPPP=crw------- 1 root root 108, 0 2007-04-13 13:20 /dev/ppp
> > A /dev/modem symbolic link is not present
> >
> >  No devfsd.conf file found, indicated absense of the devfsd daemon package
> >  for device file system (devfs) symbolic link support.
> >
> > DEVFSD=
> >  ---- dmesg queries -------
> > [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> > [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> > [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> > [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> > [    0.317070] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12
> > 14 15) *0, disabled.
> > [    0.506253]   IO window: disabled.
> > [    0.506258]   MEM window: disabled.
> > [    0.506263]   PREFETCH window: disabled.
> > [    1.170962] audit: initializing netlink socket (disabled)
> > [   21.028000] ibm_acpi: ec object not found
> > [   21.328000] pcc_acpi: loading...
> > [   30.624000] apm: BIOS not found.
> >   debian is not yet providing pre-compiled drivers for WinModems
> >
> >
> > --
> > OOzy
> > Ubuntu-Feisty
> >
>


-- 
OOzy
Ubuntu-Feisty


      ____________________________________________________________________________________
Shape Yahoo! in your own image.  Join our Network Research Panel today!   http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7 




[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux