Hi, Thank you very much for getting back to me. Unfortunately, the slmodemd.gz you sent me still exhibits the same "NO CARRIER" problem. I've attached the output of: slmodemd --debug=2 --log --alsa -hw:0,6 >& slmodemd.log and the output of the wvdial attempt to the following ALSA bug report: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3213 Vlad --- Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: > Vlad, > > A slightly more complex patch is at > http://helllabs.org/patch/20070710_slmodem/slmodem-2.9.11-alsa-period-size.patch > I used it to compile the slmodemd.gz which will follow, > While several have reported a success with it, there are also some > failures, which thus seem to be hardware specifiic. > > These hardware specific faliures should be reported to the ALSA bug > system > https://bugtrack.alsa-project.org/alsa-bug/login_page.php > First prepare a log of the failure with: > slmodemd --debug=2 --log --alsa -hw:0,N (the N appropiate for > your System) > Followed by the wvdial attempt > There is an option for uploading such logs into the bug report. > > MarvS > > and need additional attention from ALSA > > On 9/3/07, Vlad <vladc6@xxxxxxxxx> wrote: > > Hi, > > > > I'm using Ubuntu 7.04 with kernel 2.6.20-16-generic. The patch to > > slmodem-2.9.11-20070813 from > > > http://helllabs.org/patch/20070710_slmodem/slmodem-2.9.11-alsa-period-size.patch > > fixed the "error: period size 48 is not supported by playback > (64)". > > However, wvdial now says that there is no carrier. I've tried > multiple > > numbers to multiple ISPs, but still there's no carrier: > > > > vlad@ubuntu:~$ sudo wvdial > > --> WvDial: Internet dialer version 1.56 > > --> Cannot get information for serial port. > > --> Initializing modem. > > --> Sending: ATZ > > ATZ > > OK > > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > OK > > --> Modem initialized. > > --> Sending: ATDT MY NUMBER > > --> Waiting for carrier. > > ATDT MY NUMBER > > NO CARRIER > > --> No Carrier! Trying again. > > --> Sending: ATDT MY NUMBER > > > > > > Following are the contents of /etc/wvdial.conf: > > > > [Dialer Defaults] > > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > Modem Type = Analog Modem > > Phone = MY NUMBER > > ISDN = 0 > > Username = MY USER > > Init1 = ATZ > > Password = MY PASSWORD > > Modem = /dev/ttySL0 > > Carrier Check = no > > Baud = 460800 > > > > > > The problem I'm encountering seems to be the same as in: > > http://archives.linmodems.org/27282 > > > > Any idea how to get wvdial to recognize the carrier? > > > > Thank you very much for your help, > > Vlad > > > > > > > ____________________________________________________________________________________ > > Fussy? Opinionated? Impossible to please? Perfect. Join Yahoo!'s > user panel and lay it on us. > http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7 > > > > > ____________________________________________________________________________________ Park yourself in front of a world of choices in alternative vehicles. Visit the Yahoo! Auto Green Center. http://autos.yahoo.com/green_center/
