Thanks Marvin, did you mean to try on "Username = bizmail/hce.com.au"?
Thank you.
Jim
Marvin Stodolsky wrote:
RE: CHAP authentication failed
For CHAP identification it is sometimes necessary to replace LoginName with
provider/LoginName inder Linux
For example if your provider is BIZMAIL, then try: BIZMAIL/LoginName
MarvS
On 7/31/07, YH <yh@xxxxxxxxxxxxxx> wrote:
Hi Jacques,
Great, Jim.
So if I understand you correctly you compiled the source file and your
modem works , right?
Yes, I compiled the source file and the modem works. But the connection
is not stable, it sometime failed at authentication (please see
following log message). Like today, I actually tried 5 reconnections
before it was connected. Not sure if following wvdial.conf caused the
problem? Or should I change asyncmap to FFFFFFFF next time?
[Dialer Defaults]
Modem = /dev/modem
Baud = 115200
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ISDN = 0
Modem Type = Analog Modem
Phone = 0198331600
Username = hce@xxxxxxxxxxxxxx
Password = xxxxxxx
Auto DNS = on
Abort = on
Stupid Mode = yes
Log message:
Jul 31 20:06:45 Jupiter kernel: PPP generic driver version 2.4.2
Jul 31 20:06:45 Jupiter pppd[2366]: pppd 2.4.1 started by root, uid 0
Jul 31 20:06:46 Jupiter pppd[2366]: Using interface ppp0
Jul 31 20:06:46 Jupiter pppd[2366]: Connect: ppp0 <--> /dev/ttyLT0
Jul 31 20:06:46 Jupiter /etc/hotplug/net.agent: assuming ppp0 is already up
Jul 31 20:07:07 Jupiter pppd[2366]: Remote message: Authentication failed
Jul 31 20:07:07 Jupiter pppd[2366]: CHAP authentication failed
Jul 31 20:07:07 Jupiter pppd[2366]: Hangup (SIGHUP)
Jul 31 20:07:07 Jupiter pppd[2366]: Modem hangup
Jul 31 20:07:07 Jupiter pppd[2366]: Connection terminated.
Jul 31 20:07:07 Jupiter pppd[2366]: Exit.
