Re: Fernando, España - Spain, Welcome to openSUSE 10.2 (i586) - Kernel kernel 2.6.18.8-0.5-bigsmp

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Fernando,

Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack
under Linux with:
      $ tar zxf SLMODEMD.gcc4.1.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
       slmodemd -c YOUR_COUNTRY --alsa hw:0,6
reporting dynamic creation of ports:
      /dev/ttySL0 --> /dev/pts/N   , with N some number
Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.

Also please:
$  cp  -a  /proc/asound fsg
$ tar cfz fsg.tgz  fsg/
and send me fsg.tgz  to enrich our archives.

MarvS
scanModem maintainer

On 7/24/07, Fernando Salvador Gradaille <fsalvadorg@xxxxxxxxx> wrote:
 This will alert cogent experts, and  distinguish cases in the Archives.
 YourCountry will enable Country Code guidance.
 Occassionally responses are blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org .
 Local Linux experts can be found through:
http://www.linux.org/groups/index.html
--------------------------  System information ----------------------------
CPU=i686,
Welcome to openSUSE 10.2 (i586) - Kernel
Linux version 2.6.18.8-0.5-bigsmp (geeko@buildhost) (gcc version 4.1.2
20061115 (prerelease) (SUSE Linux)) #1 SMP Fri Jun 22 12:17:53 UTC
2007
 scanModem update of:  2007_July_16


ALSAversion 1.0.13
USB modem not detected by lsusb

Modem or host audio card candidates have firmware information:

 PCI slot       PCI ID          SubsystemID     Name
 ----------     ---------       ---------       --------------
 00:1b.0        8086:27d8       1179:ff10       Audio device: Intel Corporation 82801G

 Modem interrupt assignment and sharing:
 58:        679          0   IO-APIC-level  HDA Intel

 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:1b.0 to 64

 === Finished modem firmware and bootup diagnostics section. ===
 === Next deducing cogent software ===

8086:27d8 is a High Definition Audio card, possibly hosting a soft modem.
 ---ALSA bootup diagnostics ---
 For candidate modem in PCI bus:  00:1b.0
   Class 0403: 8086:27d8 Audio device: Intel Corporation 82801G
      Primary PCI_id  8086:27d8
    Subsystem PCI_id  1179:ff10
    Softmodem codec or Vendor from diagnostics:
                              from    Archives: 11c1, an AgereSystems type.


 Lacking a dsp (digital signal processing) chip, the modem is a software
 intensive or "softmodem" type. Its primary controller manages the traffic
 with the CPU. But the software needed is specified in the Subsystem.
 -----------------------------------------
Support type needed or chipset: slmodemd

 An ALSA (Advanced Linux Sound Architecture) modem driver:  snd-hda-intel
 provides Low Level support enabling contact with the modem hardware.
 For all BUT Conexant chip soft modems (using hsfmodem software)
 complementary High Level support is through a Smartlink utility:  slmodemd

 Download from http://linmodems.technion.ac.il/packages/smartlink/
 the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack
under Linux with:
        $ tar zxf SLMODEMD.gcc4.1.tar.gz
 and read instructions therein. But briefly, the modem is setup with command:
         slmodemd -c YOUR_COUNTRY --alsa hw:0,6
 reporting dynamic creation of ports:
        /dev/ttySL0 --> /dev/pts/N   , with N some number
 Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.

 Already loaded into the kernel is snd-hda-intel and audio drivers it
depends on,
 displayed by:  lsmod | grep snd_hda_intel
Module                  Size  Used by
-------------------------------------
snd_hda_intel          35476  1
snd_hda_codec         176640  1 snd_hda_intel
snd_pcm                99204  3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd                    73476  10
snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
snd_page_alloc         26888  2 snd_hda_intel,snd_pcm


The diagnostic outputs for this softmodem section have their raw information in
folders and text files under /proc/asound/ which you can browse. The information
is from files:
        /proc/asound/pcm
-------------------------------
00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
00-00: ALC861 Analog : ALC861 Analog : playback 1 : capture 2

        /proc/asound/modules
-------------------------------
 0 snd_hda_intel
and from the command:
        aplay -l | grep -i modem
card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]

----------------end Softmodem section --------------

Writing Intel.txt
Writing Smartlink.txt
============ end Smartlink section =====================

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.1.2
             and the compiler used in kernel assembly: 4.1.2

 Kernel-header resources needed for compiling are not manifestly ready!

 If compiling is necessary packages must be installed, providing:
         kernel-source-2.6.18.8-0.5-bigsmp


Checking pppd properties:
        -rwxr-xr-x 1 root dialout 295488 Nov 25  2006 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
        $ su - root  (not for Ubuntu)
         chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
         chmod a+x /usr/sbin/pppd

Checking settings of:   /etc/ppp/options
noipdefault
noauth
crtscts
lock
modem
asyncmap 0
nodetach
lcp-echo-interval 30
lcp-echo-failure 4
lcp-max-configure 60
lcp-restart 2
idle 600
noipx
file /etc/ppp/filters

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/YourSystem.txt concerning other COMM channels: eth0 eth1
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
     Within /etc/udev/ files:
/etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave",                NAME="modems/%k",
GROUP="uucp"
/etc/udev/rules.d/31-network.rules:SUBSYSTEM=="net",
ENV{INTERFACE}=="ppp*|ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*|bond*|vlan*|modem*|dsl*",
GOTO="skip_ifup"
     Within /etc/modprobe.conf files:
/etc/modprobe.conf:# Linux ACP modem (Mwave)
/etc/modprobe.d/blacklist:# ALSA PCI sound/modem modules - should be
configured via yast
/etc/modprobe.d/blacklist:blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist:blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux