Hi!
I successfuly load slmodem: slmodemd --alsa hw:0 -c RUSSIA
Then create symlink /dev/ttySL0 --> /dev/modem
And I succesfuly talk with my modem on AT language :) in KPPP
All is OK, but when I attempt to dial I always receive message "NO
CARRIER" even before my modem will try to dial.
One more. In YourSystem.txt I found that I should use modem:1 instead of
hw:0, but I always receive:
"ALSA lib pcm_hw.c:1305:(_snd_pcm_hw_open) Invalid value for card
error: alsa setup: cannot open playback device modem:1 No such device
error: cannot setup device modem:1 "
even after:
modprobe -r snd-intel8x0m
modprobe snd-intel8x0m
P.S. I don't want to use wvdial program. Can you help me with it? Thx
and best regards.
--
Regards,
Igor Mironchick,
Intervale ©
#ICQ 492-597-570
Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server.
Do use the following as the email Subject Line:
SomeName, YourCountry Mandriva Linux release 2007.0 (Official) for i586
Kernel 2.6.17-5mdv on an i686 / kernel 2.6.17-5mdv
This will alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org .
Local Linux experts can be found through: http://www.linux.org/groups/index.html
-------------------------- System information ----------------------------
CPU=i686, Mandriva Linux release 2007.0 (Official) for i586
Kernel 2.6.17-5mdv on an i686 /
Linux version 2.6.17-5mdv (rtp@xxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.1 20060724 (prerelease) (4.1.1-3mdk)) #1 SMP Wed Sep 13 14:32:31 EDT 2006
scanModem update of: 2007_July_16
The modem symbolic link is /dev/modem -> ttySL0
ALSAversion 1.0.12
USB modem not detected by lsusb
Modem or host audio card candidates have firmware information:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1e.3 8086:266d 103c:099c Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW
Modem interrupt assignment and sharing:
17: 3 IO-APIC-level ohci1394, ICH4
--- Bootup diagnostics for card in PCI slot 00:1e.3 ----
ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 22 (level, low) -> IRQ 17
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 22 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1e.3 to 64
The PCI slot 00:1e.3 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
For candidate modem in PCI bus: 00:1e.3
Class 0703: 8086:266d Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW
Primary PCI_id 8086:266d
Subsystem PCI_id 103c:099c
Softmodem codec or Vendor from diagnostics:
from Archives: SIL27, an AgereSystems type.
Lacking a dsp (digital signal processing) chip, the modem is a software
intensive or "softmodem" type. Its primary controller manages the traffic
with the CPU. But the software needed is specified in the Subsystem.
-----------------------------------------
Support type needed or chipset: slmodemd
An ALSA (Advanced Linux Sound Architecture) modem driver: snd-intel8x0m
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack under Linux with:
$ tar zxf SLMODEMD.gcc4.1.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
slmodemd -c YOUR_COUNTRY --alsa modem:1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
Already loaded into the kernel is snd-intel8x0m and audio drivers it depends on,
displayed by: lsmod | grep snd_intel8x0m
Module Size Used by
-------------------------------------
snd_intel8x0m 14860 0
snd_ac97_codec 96868 2 snd_intel8x0m,snd_intel8x0
snd_pcm 70116 4 snd_intel8x0m,snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd 46500 12 snd_intel8x0m,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc 8712 3 snd_intel8x0m,snd_intel8x0,snd_pcm
The diagnostic outputs for this softmodem section have their raw information in
folders and text files under /proc/asound/ which you can browse. The information
is from files:
/proc/asound/pcm
-------------------------------
00-04: Intel ICH - IEC958 : Intel ICH6 - IEC958 : playback 1
00-03: Intel ICH - ADC2 : Intel ICH6 - ADC2 : capture 1
00-02: Intel ICH - MIC2 ADC : Intel ICH6 - MIC2 ADC : capture 1
00-01: Intel ICH - MIC ADC : Intel ICH6 - MIC ADC : capture 1
00-00: Intel ICH : Intel ICH6 : playback 1 : capture 1
/proc/asound/modules
-------------------------------
0 snd_intel8x0
and from the command:
aplay -l | grep -i modem
----------------end Softmodem section --------------
Writing Intel.txt
Writing Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
/dev/.udevdb
Versions adequately match for the compiler installed: 4.1.1
and the compiler used in kernel assembly: 4.1.1
Compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
kernel_headers base folder /lib/modules/2.6.17-5mdv/build
Checking pppd properties:
-rwsr-xr-t 1 root root 304536 Ð?вг 9 2006 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
ln -sf ttySL0 /dev/modem
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 6 Ð?Ñ?л 21 2007 /dev/modem -> ttySL0
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/conf.d/modem.conf:ln -sf ttySL0 /dev/modem
Within /etc/modprobe.conf files:
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
