Folks, Does anyone have Smartlink slamr driver working on a X86_64 system? The AMD 64 machine I have access to only has a 32 bit bridge and the compiling support that Devinder requires is not easily installed. I don't have any personal experience with these Systems. However the modem will have to be run in 32 bit modem, since the pro-compiled binary components of slamr and slmodemd were 32 bit compiled. Anyone have any experience or guidance, I remember Sasha commenting that 32 bit libraires have to be installed for the compilation on an x86_64 system. MarvS On 7/13/07, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
Starting function tests, loading drivers: FATAL: Error inserting ungrab_winmodem (/lib/modules/2.6.20-15-generic/extra/ungrab- winmodem.ko): Invalid module format --------- These drivers were compiled on a $ uname -m i686 so the linux-headers installed were i686 specific while Devinder's system like needs X86_64 specific headers, which I still have to get to tonight. MarvS On 7/12/07, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: > Devinder, > > The core problem is the x86_64 system. > I'll get to such a x86_64 PC later today and assembly a new package for you. > > MarvS > > On 7/12/07, Devinder Parmar <devinderparmar@xxxxxxxxx> wrote: > > > > > > Dear Marvin > > The following instructions on slamr-2.6.20-15-generic.tar.gz were run > > > > $ tar zxf slamr*.tar.gz > > Move into the folder: > > $ cd slamr-2.6.20-15-generic > > Browse the files. Then > > $ sudo ./setup > > > > The outcome of $ sudo ./setup showing errors is as follows: > > > > > > Password: > > driver=slamr > > When asked about your country, Enter: > > USA > > > > Installing the Debian packages supporting autoloading > > dpkg: error processing > > sl-modem-daemon_2.9.10+2.9.9d+e-pre2-5build1_i386.deb > > (--install): > > package architecture (i386) does not match system (amd64) > > Errors were encountered while processing: > > sl-modem-daemon_2.9.10+2.9.9d+e-pre2-5build1_i386.deb > > > > Copying over newer files > > cp: cannot stat `sl-modem-daemon.modutils': No such file or directory > > Making folder /lib/modules/2.6.20-15-generic/extra > > Copying drivers to /lib/modules/2.6.20-15-generic/extra > > Checking driver install > > slamr.ko slusb.ko ungrab-winmodem.ko > > Finished installs. > > Informing the System > > > > Starting function tests, loading drivers: > > FATAL: Error inserting ungrab_winmodem > > (/lib/modules/2.6.20-15-generic/extra/ungrab- winmodem.ko): > > Invalid > > module format > > FATAL: Error inserting slamr > > (/lib/modules/2.6.20-15-generic/extra/slamr.ko): Invalid > > module format > > Running diagnostic: > > > > > > ports should be created by: > > slmodemd -c USA /dev/slamr0 > > ./setup: 45: /usr/sbin/slmodemd: not found > > Checking for success > > Port creation with slmodemd failed. > > Read the Slamr.txt record, other 1st_Read.txt CountryList.txt wvdial.txt > > files and the sample wvdial.conf . > > > > > > > > > > Please help > > Devinder > > > > > > -----Original Message----- > > From: "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> > > Sent 7/10/2007 6:20:51 AM > > To: "D S Parmar" <dsparmar@xxxxxxxxxx> > > Cc: Discuss@xxxxxxxxxxxxx > > Subject: Re: Devinder, India, Ubuntu 7.04 Kernel 2.6.20-15 - generic > > > > DS > > > > PCI slot PCI ID SubsystemID Name > > ---------- --------- --------- -------------- > > 04:04.0 1057:3052 1057:3020 Modem: Motorola Unknown device 3052 > > under CPU=x86_64, Ubuntu 7.04 Linux version 2.6.20-15-generic > > > > there may be support by the slamr driver + slmodemd helper package > > > > 1057:3052 has a Motorola chipset, poorly supported by Motorola itself > > However Zello discovered that drivers written to support Smartlink modems > > do s > > upport the 1057:3052 chipset!! > > It sufficed to add 1057:3052 to the list of modem cards recognized by the > > Smart > > link slamr driver. > > There is a ungrab-winmodem driver used in conjunction with slamr, which > > must ha > > ve 1057:3052 > > similarly added. See messages from Zello: > > > > http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00846.html > > > > http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00848.html > > and Alvaro Aguirre about the ungrab-winmodem fix: > > > > http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00990.html > > > > For general guidance on ungrab-winmodem + slamr usage, read the > > Smartlink.txt > > within the slamr-2.6.20-15-generic.tar.gz which can be downloaded from > > http://phep2.technion.ac.il/linmodems/packages/smartlink/Ubuntu/ > > > > Unpack with: > > $ tar zxf slamr*.tar.gz > > Move into the folder: > > $ cd slamr-2.6.20-15-generic > > Browse the files. Then > > $ sudo ./setup > > Follow the output directions. > > With: > > $ sudo gedit /etc/default/sl-modem-daemon > > change > > SLMODEMD_COUNTRY=USA > > into > > SLMODEMD_COUNTRY=INDIA > > > > Upon reboot you should be able to dialout with: > > $ sudo wvdial > > > > MarvS > > scanModem maintainer > > > > > > > > > > On 7/9/07, D S Parmar wrote: > > > > > > > > >
