Nayan,
THe compile processes were fine. After rebooting do
$ su - root
# mknod -m 600 /dev/slamr0 c 242 0
as devices generally are created in RAM space and do not survive shutdown.
But this can be automated later. Again do
# modprobe ungrab-winmodem
# modprobe slamr
# slmodemd -c INDIA /dev/slamr0
Check for port creation:
# ls -l /dev/ttySL0 /dev/pts/*
If there is a symbolic link:
/dev/ttySL0 --> /dev/pts/N
N some number. Again try
# wvdialconf /etc/wvdial.conf
MarvS
On 6/10/07, nayan nakhare <nayannakhare@xxxxxxxxx> wrote:
Hi Marvin,
Thanks for the reply.
I do not have /usr/src/modules/, & couldn't create modules folder in
/usr/src/, so I created it in my home directory & copied the
ungrab-winmodem-20070505.tar.gz & slmodem-2.9.11-20070505.tar.gz to it.
I followed your other instructions, but was unsuccessful.
Will you please guide me in this situation?
The output of the terminal is given below:
su
Password:
linux-k5vv:/home/nayan # cd modules
linux-k5vv:/home/nayan/modules # cd ungrab-winmodem-20070505
linux-k5vv:/home/nayan/modules/ungrab-winmodem-20070505 # make clean
rm -f *.o *.ko *.mod.* .*.cmd *~
rm -f -r .tmp_versions
linux-k5vv:/home/nayan/modules/ungrab-winmodem-20070505 # make
make modules -C /lib/modules/2.6.18.2-34-default/build
SUBDIRS=/home/nayan/modules/ungrab-winmodem-20070505
make[1]: Entering directory `/usr/src/linux-2.6.18.2-34-obj/i386/default'
make -C ../../../linux-2.6.18.2-34 O=../linux-2.6.18.2-34-obj/i386/default
modules
CC [M] /home/nayan/modules/ungrab-winmodem-20070505/ungrab-winmodem.o
Building modules, stage 2.
MODPOST
CC /home/nayan/modules/ungrab-winmodem-20070505/ungrab-winmodem.mod.o
LD [M] /home/nayan/modules/ungrab-winmodem-20070505/ungrab-winmodem.ko
make[1]: Leaving directory `/usr/src/linux-2.6.18.2-34-obj/i386/default'
linux-k5vv:/home/nayan/modules/ungrab-winmodem-20070505 # make install
make modules -C /lib/modules/2.6.18.2-34-default/build
SUBDIRS=/home/nayan/modules/ungrab-winmodem-20070505
make[1]: Entering directory `/usr/src/linux-2.6.18.2-34-obj/i386/default'
make -C ../../../linux-2.6.18.2-34 O=../linux-2.6.18.2-34-obj/i386/default
modules
Building modules, stage 2.
MODPOST
make[1]: Leaving directory `/usr/src/linux-2.6.18.2-34-obj/i386/default'
install -D -m 644 ungrab-winmodem.ko
/lib/modules/2.6.18.2-34-default/extra/ungrab-winmodem.ko
/sbin/depmod -a
linux-k5vv:/home/nayan/modules/ungrab-winmodem-20070505 # cd
/home/nayan/modules/slmodem-2.9.11-20070505
linux-k5vv:/home/nayan/modules/slmodem-2.9.11-20070505 # make clean
make -C modem clean && make -C drivers clean && echo "done."
make[1]: Entering directory
`/home/nayan/modules/slmodem-2.9.11-20070505/modem'
rm -f slmodemd modem_test modem_main.o modem_cmdline.o modem_test.o modem.o
modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o
modem_comp.o modem_param.o modem_debug.o homolog_data.o dp_sinus.o
dp_dummy.o sysdep_common.o
rm -f *~ *.orig *.rej
make[1]: Leaving directory
`/home/nayan/modules/slmodem-2.9.11-20070505/modem'
make[1]: Entering directory
`/home/nayan/modules/slmodem-2.9.11-20070505/drivers'
rm -f kernel-ver slamr.o slusb.o slamr.ko slusb.ko *st7554.o amrmo_init.o
sysdep_amr.o *.mod.* .*.cmd *~
rm -f -r .tmp_versions
make[1]: Leaving directory
`/home/nayan/modules/slmodem-2.9.11-20070505/drivers'
done.
linux-k5vv:/home/nayan/modules/slmodem-2.9.11-20070505 # make
make -C modem all
make[1]: Entering directory
`/home/nayan/modules/slmodem-2.9.11-20070505/modem'
rebuild profile...
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_main.o -c modem_main.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_cmdline.o -c
modem_cmdline.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem.o -c modem.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_datafile.o -c
modem_datafile.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_at.o -c modem_at.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_timer.o -c modem_timer.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_pack.o -c modem_pack.c
modem_pack.c: In function ?modem_async_get_bits?:
modem_pack.c:100: warning: pointer targets in passing argument 2 of
?m->get_chars? differ in signedness
modem_pack.c: In function ?modem_async_put_bits?:
modem_pack.c:148: warning: pointer targets in passing argument 2 of
?m->put_chars? differ in signedness
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_ec.o -c modem_ec.c
modem_ec.c: In function ?tx_info?:
modem_ec.c:723: warning: pointer targets in passing argument 2 of
?l->modem->get_chars? differ in signedness
modem_ec.c: In function ?push_rest_data?:
modem_ec.c:811: warning: pointer targets in passing argument 2 of
?l->modem->put_chars? differ in signedness
modem_ec.c: In function ?rx_info?:
modem_ec.c:860: warning: pointer targets in passing argument 2 of
?l->modem->put_chars? differ in signedness
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_comp.o -c modem_comp.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_param.o -c modem_param.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_debug.o -c modem_debug.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o homolog_data.o -c
homolog_data.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_sinus.o -c dp_sinus.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_dummy.o -c dp_dummy.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o sysdep_common.o -c
sysdep_common.c
gcc -o slmodemd modem_main.o modem_cmdline.o modem.o modem_datafile.o
modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o modem_param.o
modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o dsplibs.o sysdep_common.o
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_test.o -c modem_test.c
gcc -o modem_test modem_test.o modem_cmdline.o modem.o modem_datafile.o
modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o modem_param.o
modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o dsplibs.o sysdep_common.o
make[1]: Leaving directory
`/home/nayan/modules/slmodem-2.9.11-20070505/modem'
make -C drivers KERNEL_DIR=/lib/modules/2.6.18.2-34-default/build
make[1]: Entering directory
`/home/nayan/modules/slmodem-2.9.11-20070505/drivers'
cc -I/lib/modules/2.6.18.2-34-default/build/include -o kernel-ver
kernel-ver.c
make all KERNEL_VER=2.6.18.2-34-default
make[2]: Entering directory
`/home/nayan/modules/slmodem-2.9.11-20070505/drivers'
make modules -C /lib/modules/2.6.18.2-34-default/build
SUBDIRS=/home/nayan/modules/slmodem-2.9.11-20070505/drivers
make[3]: Entering directory `/usr/src/linux-2.6.18.2-34-obj/i386/default'
make -C ../../../linux-2.6.18.2-34 O=../linux-2.6.18.2-34-obj/i386/default
modules
CC [M] /home/nayan/modules/slmodem-2.9.11-20070505/drivers/amrmo_init.o
CC [M] /home/nayan/modules/slmodem-2.9.11-20070505/drivers/sysdep_amr.o
CC [M] /home/nayan/modules/slmodem-2.9.11-20070505/drivers/st7554.o
LD [M] /home/nayan/modules/slmodem-2.9.11-20070505/drivers/slamr.o
LD [M] /home/nayan/modules/slmodem-2.9.11-20070505/drivers/slusb.o
Building modules, stage 2.
MODPOST
WARNING: could not find
/home/nayan/modules/slmodem-2.9.11-20070505/drivers/.amrlibs.o.cmd for
/home/nayan/modules/slmodem-2.9.11-20070505/drivers/amrlibs.o
WARNING: modpost: GPL-incompatible module slusb.ko uses future GPL-only
symbol 'usb_deregister'
WARNING: modpost: GPL-incompatible module slusb.ko uses future GPL-only
symbol 'usb_register_driver'
CC /home/nayan/modules/slmodem-2.9.11-20070505/drivers/slamr.mod.o
LD [M] /home/nayan/modules/slmodem-2.9.11-20070505/drivers/slamr.ko
CC /home/nayan/modules/slmodem-2.9.11-20070505/drivers/slusb.mod.o
LD [M] /home/nayan/modules/slmodem-2.9.11-20070505/drivers/slusb.ko
make[3]: Leaving directory `/usr/src/linux-2.6.18.2-34-obj/i386/default'
make[2]: Leaving directory
`/home/nayan/modules/slmodem-2.9.11-20070505/drivers'
make[1]: Leaving directory
`/home/nayan/modules/slmodem-2.9.11-20070505/drivers'
linux-k5vv:/home/nayan/modules/slmodem-2.9.11-20070505 # make install
make -C modem all
make[1]: Entering directory
`/home/nayan/modules/slmodem-2.9.11-20070505/modem'
make[1]: Leaving directory
`/home/nayan/modules/slmodem-2.9.11-20070505/modem'
make -C drivers KERNEL_DIR=/lib/modules/2.6.18.2-34-default/build
make[1]: Entering directory
`/home/nayan/modules/slmodem-2.9.11-20070505/drivers'
cc -I/lib/modules/2.6.18.2-34-default/build/include -o kernel-ver
kernel-ver.c
make all KERNEL_VER=2.6.18.2-34-default
make[2]: Entering directory
`/home/nayan/modules/slmodem-2.9.11-20070505/drivers'
make modules -C /lib/modules/2.6.18.2-34-default/build
SUBDIRS=/home/nayan/modules/slmodem-2.9.11-20070505/drivers
make[3]: Entering directory `/usr/src/linux-2.6.18.2-34-obj/i386/default'
make -C ../../../linux-2.6.18.2-34 O=../linux-2.6.18.2-34-obj/i386/default
modules
Building modules, stage 2.
MODPOST
WARNING: could not find
/home/nayan/modules/slmodem-2.9.11-20070505/drivers/.amrlibs.o.cmd for
/home/nayan/modules/slmodem-2.9.11-20070505/drivers/amrlibs.o
WARNING: modpost: GPL-incompatible module slusb.ko uses future GPL-only
symbol 'usb_deregister'
WARNING: modpost: GPL-incompatible module slusb.ko uses future GPL-only
symbol 'usb_register_driver'
make[3]: Leaving directory `/usr/src/linux-2.6.18.2-34-obj/i386/default'
make[2]: Leaving directory
`/home/nayan/modules/slmodem-2.9.11-20070505/drivers'
make[1]: Leaving directory
`/home/nayan/modules/slmodem-2.9.11-20070505/drivers'
make install -C drivers KERNEL_DIR=/lib/modules/2.6.18.2-34-default/build
make[1]: Entering directory
`/home/nayan/modules/slmodem-2.9.11-20070505/drivers'
cc -I/lib/modules/2.6.18.2-34-default/build/include -o kernel-ver
kernel-ver.c
mkdir -p /dev
mknod -m 600 /dev/slamr0 c 242 0 ; mknod -m 600 /dev/slamr1 c 242 1 ;
mknod -m 600 /dev/slamr2 c 242 2 ; mknod -m 600 /dev/slamr3 c 242 3 ;
echo -n
mknod -m 600 /dev/slusb0 c 243 0 ; mknod -m 600 /dev/slusb1 c 243 1 ;
mknod -m 600 /dev/slusb2 c 243 2 ; mknod -m 600 /dev/slusb3 c 243 3 ;
echo -n
make install KERNEL_VER=2.6.18.2-34-default
make[2]: Entering directory
`/home/nayan/modules/slmodem-2.9.11-20070505/drivers'
install -D -m 644 slamr.ko /lib/modules/2.6.18.2-34-default/extra/slamr.ko
install -D -m 644 slusb.ko /lib/modules/2.6.18.2-34-default/extra/slusb.ko
/sbin/depmod -a
make[2]: Leaving directory
`/home/nayan/modules/slmodem-2.9.11-20070505/drivers'
make[1]: Leaving directory
`/home/nayan/modules/slmodem-2.9.11-20070505/drivers'
install -D -m 755 modem/slmodemd /usr/sbin/slmodemd
rm -f -rf /var/lib/slmodem
install -d -D -m 755 /var/lib/slmodem
linux-k5vv:/home/nayan/modules/slmodem-2.9.11-20070505 # modprobe
ungrab-winmodem
linux-k5vv:/home/nayan/modules/slmodem-2.9.11-20070505 # modprobe slamr
linux-k5vv:/home/nayan/modules/slmodem-2.9.11-20070505 # dmesg | grep slamr
slamr: module license 'Smart Link Ltd.' taints kernel.
slamr: SmartLink AMRMO modem.
slamr: probe 134d:2189 SL1900 card...
slamr: slamr0 is SL1900 card.
linux-k5vv:/home/nayan/modules/slmodem-2.9.11-20070505 # slmodemd -c INDIA
/dev/slamr0
SmartLink Soft Modem: version 2.9.11 Jun 10 2007 11:49:47
symbolic link `/dev/ttySL0' -> `/dev/pts/2' created.
modem `slamr0' created. TTY is `/dev/pts/2'
Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
linux-k5vv:/home/nayan/modules/slmodem-2.9.11-20070505 # wvdialconf wvtest
Scanning your serial ports for a modem.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Port Scan<*1>: S2
ttyS4<Info>: No such device or address
Port Scan<*1>: S4
ttyS5<Info>: No such device or address
Port Scan<*1>: S5
ttyS6<Info>: No such device or address
Port Scan<*1>: S6
ttyS7<Info>: No such device or address
Port Scan<*1>: S7
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
Please read the FAQ at http://open.nit.ca/wvdial/
If you still have problems, send mail to wvdial-list@xxxxxxxxxxxxx
linux-k5vv:/home/nayan/modules/slmodem-2.9.11-20070505 #
-Nayan.
