Hi!
I got a modem without manual, I couldn't figure out
its brand nor its chipset. So I downloaded the
"scanModem" script from linmodem.org. I included the
"ModemData.txt" file, if you want to check it out. But
I think it told me to try the Smartlink driver.
So I get "ungrab-winmodem-20070505" and
"slmodem-2.9.11-20070505", and compiled it without
errors (as far as I know).
First I loaded the "ungrab-winmodem" module, I get
this message:
device 1057:3052 is grabbed by driver serial: try to
release
Then I loaded "slamr debug=3". I get this message:
slamr: module license 'Smart Link Ltd.' taints kernel.
slamr: SmartLink AMRMO modem.
slamr: probe 1057:3052 SL1900 card...
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level,
low) -> IRQ 17
<p932.212749> amrmo_card_create: data c8726000.
<p932.212758> tAmrMo::tAmrMo: card c8726000, pci
cde69c00, irq 17.
<p932.212765> HWDriver: StartTable Phys = 706E000,
Lin = C706E000, IO 10
<p932.212771> HWDriver: StartTable Phys = 706C000,
Lin = C706C000, IO 0
<p932.212779> HWDriver: SIL3052Card::SIL3052Card()
<p932.212785> HWDriver: PageIn : linear C9854000,
physical 9854000
<p932.212790> HWDriver: PageOut: linear C8444000,
physical 8444000
<p932.212799> amr_create: c8acb400 (amrmo c8726000)
<p932.212833> amrmo_card_enable: card ccf2e180.
<p932.212841> [Hardware instance constructor...]
<p932.212847> HWDriver: SIL3052Card::ModemOpen()
<p932.212855> checkLock Vid=1057
<p932.212860> HWDriver: SIL3052Card::InitHw()
<p932.212865> InitHW
<p932.212873> HWDriver: ModemBaseIO=C000
<p932.212877> HWDriver:
SIL3052Card::ValidatePCIConfiguration()
<p932.212884> Additional delay 0
<p932.212888> Delay reduction of 0
<p932.212893> HWDriver: PCI core reset the DAA ...
<p932.262446> HWDriver: SIL3052_CHIPSET_REV_C
detected. Assume using 32.768KHz Osc.
<p932.438770> SIL3052codec: Setting for Automatic
Calibration mode...
<p932.438780> HWDriver: SIL3052codec::Initialize end
of Initialize reg status
<p932.438786> 3052CodecDump:>>>> Reg 28 = 3000000
<p932.438793> 3052CodecDump:>>>> Reg 33 = 0
<p932.438798> 3052CodecDump:>>>> Reg 34 = 0
<p932.438804> 3052CodecDump:>>>> Reg 35 = 0
<p932.438809> 3052CodecDump:>>>> Reg 3c = 0 ; LCS
MB(4:0)
<p932.438815> 3052CodecDump:>>>> Reg 40 = 8 ; DCT
MB(3:2)
<p932.438821> 3052CodecDump:>>>> Reg 41 = 0 ; CALD
MB(5) MCAL MB(6) CALZ MB(7)
<p932.438828> 3052CodecDump:>>>> Reg 49 = 8 ;(RCALD
MB(5)
<p932.438833> 3052CodecDump:>>>> Reg 4f = 20 ; FOH
MB(6:5)
<p932.438839> HWDriver: SIL3052codec::SetSampleRateHz
=9600
<p932.538445> SIL3052 Error:1 InitHW() fail because
DAA Frame not detected
<p932.538450> HWDriver: SIL3052codec::SetupForRing()
enter
<p932.538458> HWDriver: SIL3052codec::SetupForRing()
exit
<p932.538464> 3052CodecDump:>>>> Reg 28 = 3000000
<p932.538470> 3052CodecDump:>>>> Reg 33 = 0
<p932.538476> 3052CodecDump:>>>> Reg 34 = 0
<p932.538481> 3052CodecDump:>>>> Reg 35 = 0
<p932.538486> 3052CodecDump:>>>> Reg 3c = 0 ; LCS
MB(4:0)
<p932.538492> 3052CodecDump:>>>> Reg 40 = 8 ; DCT
MB(3:2)
<p932.538498> 3052CodecDump:>>>> Reg 41 = 0 ; CALD
MB(5) MCAL MB(6) CALZ MB(7)
<p932.538505> 3052CodecDump:>>>> Reg 49 = 8 ;(RCALD
MB(5)
<p932.538511> 3052CodecDump:>>>> Reg 4f = 20 ; FOH
MB(6:5)
<p932.628443> SIL3052 Error:2 InitHW() fail because
DAA Frame not detected
<p932.628451> MC details: Si3018 Int-DAA(@)
<p932.628456> Chipset: Si3052(D)
<p932.628462> checkLock Vid=1057
<p932.628468> HWDriver: ModemOpen() dwResult2=
4112;bFrameDetectERROR=1(ModemHelperTestResult=2)
<p932.628474> HWDriver: SIL3052Card::ModemOpen() -
Error in modem open function
<p932.628479> hal: cannot open modem card.
<p932.628484> Construction failure!
<p932.628488> Predefined rates: in 9600, out 9600
<p932.628494> OnHardwareInstanceDestroyed
<p932.628499> HWDriver: SIL3052Card::ModemClose()
<p932.628503> HWDriver:
SIL3052Card::StopWatchdogTimer()
<p932.628513> HWDriver: SIL3052DMAChannel::Reset()
<p932.628519> HWDriver: SIL3052DMAChannel::Reset()
<p932.628526> DeInitHW
slamr: cannot init card.
<p932.628541> amrmo_card_delete: card ccf2e180.
<p932.628547> amr_delete: c8acb400...
And then I get a bunch of messages like these:
May 25 12:02:31 compp4 hald[3431]: Timed out waiting
for hotplug event 1093. Rebasing to 1094
May 25 12:02:33 compp4 hald[3431]: Timed out waiting
for hotplug event 1095. Rebasing to 1096
May 25 12:02:35 compp4 hald[3431]: Timed out waiting
for hotplug event 1097. Rebasing to 1098
May 25 12:02:37 compp4 hald[3431]: Timed out waiting
for hotplug event 1099. Rebasing to 1100
Short, it didn't work.
The "scanModem" script told me I can use Motorola
drivers instead, but when I read the Motorola document
created by the script, I find that my modem --is--
supported for the Smartlink driver (somebody named
Zello said that, at least). So, ¿what I'm doing wrong?
¿Or must I search in other place?
Thanks for your time.
Hugo S. Cardozo
__________________________________________________
Correo Yahoo!
Espacio para todos tus mensajes, antivirus y antispam ¡gratis!
Regístrate ya - http://correo.espanol.yahoo.com/
Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server.
Do use the following as the email Subject Line:
SomeName, YourCountry Mandriva Linux release 2006.0 (Official) for i586
Kernel 2.6.12-12mdk-150407 on an i686 / kernel 2.6.12-12mdk-150407
This will alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org .
Local Linux experts can be found through: http://www.linux.org/groups/index.html
-------------------------- System information ----------------------------
CPU=i686, Mandriva Linux release 2006.0 (Official) for i586
Kernel 2.6.12-12mdk-150407 on an i686 /
Linux version 2.6.12-12mdk-150407 (hc@xxxxxxxxxxxxxxxx) (gcc version 4.0.1 (4.0.1-5mdk for Mandriva Linux release 2006.0)) #1 Sun Apr 15 12:55:14 PYT 2007
scanModem update of: 2007_May_11
ALSAversion
USB modem not detected by lsusb
Modem or host audio card candidates have firmware information:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:09.0 1057:3052 1057:3020 Modem: Motorola: Unknown device 3052
Modem interrupt assignment and sharing:
17: 0 IO-APIC-level libata
--- Bootup diagnositcs for card in PCI slot 00:09.0 ----
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
For candidate modem in PCI bus: 00:09.0
Class 0703: 1057:3052 Modem: Motorola: Unknown device 3052
Primary PCI_id 1057:3052
Support type needed or chipset: Motorola
The modem is supported by the Smartlink slamr driver
plus the slmodemd helper utility. Read the
Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
Writing Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udevdb
Versions adequately match for the compiler installed: 4.0.1
and the compiler used in kernel assembly: 4.0.1
Compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.0
kernel_headers base folder /lib/modules/2.6.12-12mdk-150407/build
Checking settings of: /etc/ppp/options
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
