Re: help with driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



PLEASE,
try to understand that we cannot guess WHICH driver you tried to install nor WHAT did not work.

Jacques

moja155@xxxxxxx wrote:
I tried to install the driver but it did not work.Please help.Thanks



------------------------------------------------------------------------

 Only plain text email is forwarded by the  DISCUSS@xxxxxxxxxxxxx List Server.
 Do use the following as the email Subject Line:
SomeName, YourCountry Ubuntu 7.04 kernel 2.6.20-15-generic This will alert cogent experts, and distinguish cases in the Archives.
 YourCountry will enable Country Code guidance.
 Occassionally responses are blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org .
 Local Linux experts can be found through: http://www.linux.org/groups/index.html
--------------------------  System information ----------------------------
CPU=i686, Ubuntu 7.04 Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007
 scanModem update of:  2007_May_11


ALSAversion 1.0.13
USB modem not detected by lsusb

Modem or host audio card candidates have firmware information:

 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
00:1f.6 8086:24c6 161f:202f Modem: Intel Corporation 82801DB/DBL/DBM Modem interrupt assignment and sharing: 16: 28649 0 IO-APIC-fasteoi yenta, Intel 82801DB-ICH4, Intel 82801DB-ICH4 Modem

 --- Bootup diagnositcs for card in PCI slot 00:1f.6 ----
[    1.160798] ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 16
[    1.160807] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 3898.131113] ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 16
[ 3898.131141] PCI: Setting latency timer of device 0000:00:1f.6 to 64

The PCI slot 00:1f.6 of the modem card may be disabled early in a bootup process, but then enabled later. If modem drivers load but the modem is not responsive, read Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 === Finished modem firmware and bootup diagnostics section. ===
 === Next deducing cogent software ===

 For candidate modem in PCI bus:  00:1f.6
   Class 0703: 8086:24c6 Modem: Intel Corporation 82801DB/DBL/DBM
      Primary PCI_id  8086:24c6
Subsystem PCI_id 161f:202f Softmodem codec or Vendor from diagnostics: CXT30, a Conexant type, from Archives: CXT is a generic for all CXTnumbers, with Linuxant hsfmodem software support. This is a NEW softmodem case! Please send the output ModemData.txt to DISCUSS@xxxxxxxxxxxxx , even if further assistance is not needed.
 It will enrich the Archive and help others!
 -------------------------------------------
Lacking a dsp (digital signal processing) chip, the modem is a software intensive or "softmodem" type. Its primary controller manages the traffic with the CPU. But the software needed is specified in the Subsystem.
 -----------------------------------------
Support type needed or chipset:	hsfmodem


The diagnostic outputs for this softmodem section have their raw information in
folders and text files under /proc/asound/ which you can browse. The information
is from files:
	/proc/asound/pcm
-------------------------------
00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1
00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1
00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1
00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1
00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1
01-00: Intel ICH - Modem : Intel 82801DB-ICH4 Modem - Modem : playback 1 : capture 1

	/proc/asound/modules
-------------------------------
 0 snd_intel8x0
 1 snd_intel8x0m
	/proc/asound/card1/codec97#0/mc97#0-0+regs
-------------------------------
0:7c = 4358  and  0:7e = 5430
which were translated from hexadecimal code into:  CXT30

	/proc/asound/card1/codec97#0/mc97#0-0
-------------------------------
Extended modem ID: codec=0 LIN1

and from the command:
	aplay -l | grep -i modem
card 1: Modem [Intel 82801DB-ICH4 Modem], device 0: Intel ICH - Modem [Intel 82801DB-ICH4 Modem - Modem]

----------------end Softmodem section --------------

Writing Intel.txt

Formal support for Conexant chipset modems are available ONLY through http://www.linuxant.com/drivers. Read Conexant.txt for details.
 and Modem/YourSystem.txt for follow through guidance.  Driver speed is limited to
 14,400 until a key is purchased.  There is NO freeware alternative.
 There are two support package types: hsfmodem  and hcflinmodem.
 http://www.lorenzobettini.it/linux/LinuxSonyVaioVGN-S5VP_B reports a
 problem and solution in stalling a key, after testing of the free low
 speed download.

The hsfmodem package serves a great variety of Conexant chipset modems. From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php download hsfmodem_VersionSpec_k2.6.20_15_generic_ubuntu_i386.deb.zip with 2.6.20_15_generic equivalent to 2.6.20-15-generic, your kernel version.
 Under Linux unpack with:
 $ unzip hsfmodem*.zip
 Then install with:
 $ sudo dpkg -i hsfmodem*.deb
 Subsequently, the modem should be found with
 $ sudo wvdialconf /etc/wvdial.conf
 Edit in your personal information with:
 $ sudo gedit /etc/wvdial.conf
 and try dialing out with:
 $ sudo wvdial.
 See Testing.txt  for details.
Read Conexant.txt

Writing Conexant.txt


 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.1.2
             and the compiler used in kernel assembly: 4.1.2

 Kernel-header resources needed for compiling are not manifestly ready!

 If compiling is necessary packages must be installed, providing:
	 linux-headers-2.6.20-15-generic


Checking pppd properties:
	-rwsr-xr-- 1 root dip 269224 2007-04-04 23:41 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	sudo chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/YourSystem.txt concerning other COMM channels: eth0 eth1
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
/device/modem symbolic link: slmodemd created symbolic link /dev/ttySL0: Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux