Re: SiS630, GERMANY Ubuntu 7.04 kernel 2.6.20-15-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Jacques Goldberg schrieb:
> You should then have  aumixer , alsamixer, and xfce-mixer , one of
> which at least able to control the status of the hook among many other
> features.

I couldn't find a way to do this with a commandline tool, so I used
xfce4-mixer and checked the Off-hook-box. No success:

# sudo wvdial
--> WvDial: Internet dialer version 1.56
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 X3 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 X3 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATX0DT019164284
--> Waiting for carrier.
ATX0DT019164284
--> Timed out while dialing.  Trying again.
--> Sending: ATX0DT019164284
--> Waiting for carrier.
NO CARRIER
ATX0DT019164284
--> No Carrier!  Trying again.


The checkbox was automatically unchecked when I stopped wvdial and then
again checked when I started wvdial once more.


Tim.

> Tim Kielmann wrote:
>> Hi Jacques,
>>
>> Jacques Goldberg schrieb:
>>> Do you have a line
>>> Carrier Check = no
>>> in your file   wvdial.conf ?
>>
>> Yes, wvdial.conf also is in my initial mail.
>>> If you already have it, use the alsa mixer to switch the Modem on/off
>>> hook status.
>>
>> How do I do that? Sorry,
>> # man amixer
>> didn't help me with this.
>>
>> # amixer | grep -i hook
>> Simple mixer control 'Off-hook',0
>>
>>> Finally, if you are using KDE, are you aware that it resets ALSA to
>>> being off when you login?
>>
>> No, Xubuntu uses Xfce.
>>
>>
>> Thanks,
>> Tim.
>>
>>> Tim Kielmann wrote:
>>>> Hello Joern,
>>>>
>>>> Joern Wuestenfeld schrieb:
>>>>> did you take a look at the files in /proc/asound?
>>>>>
>>>>> There should be a directory called card0. Inside this directory there
>>>>> should be two files named "codec#0" and "codec#1". Normally
>>>>> "codec#1" is
>>>>> the modem codec. Do a `cat codec#1`.
>>>> # find /proc/asound/card0 -iname "codec*"
>>>> /proc/asound/card0/codec97#0
>>>>
>>>> # ls -l /proc/asound/card0/
>>>> insgesamt 0
>>>> dr-xr-xr-x  2 root root 0 2007-05-25 11:31 codec97#0
>>>> -r--r--r--  1 root root 0 2007-05-25 11:31 id
>>>> -rw-r--r--  1 root root 0 2007-05-25 11:31 oss_mixer
>>>> dr-xr-xr-x  3 root root 0 2007-05-25 11:31 pcm0c
>>>> dr-xr-xr-x 34 root root 0 2007-05-25 11:31 pcm0p
>>>> dr-xr-xr-x  3 root root 0 2007-05-25 11:31 pcm1p
>>>> -r--r--r--  1 root root 0 2007-05-25 11:31 sis7018
>>>>
>>>> # ls -l /proc/asound/card0/codec97#0/
>>>> insgesamt 0
>>>> -r--r--r-- 1 root root 0 2007-05-25 11:32 ac97#0-0
>>>> -r--r--r-- 1 root root 0 2007-05-25 11:32 ac97#0-0+regs
>>>> -r--r--r-- 1 root root 0 2007-05-25 11:32 mc97#1-1
>>>> -r--r--r-- 1 root root 0 2007-05-25 11:32 mc97#1-1+regs
>>>>
>>>> # cat /proc/asound/card0/codec97#0/mc97#1-1
>>>> 1-1/0: Silicon Laboratory Si3036,8 rev 2
>>>>
>>>> Extended modem ID: codec=1 LIN1
>>>> Modem status     : GPIO MREF ADC1 DAC1 PRE(ADC2) PRF(DAC2) PRG(HADC)
>>>> PRH(HDAC)
>>>> Line1 rate       : 8000Hz
>>>>
>>>>>  If this seems to be the modem
>>>>> (identified by Id), then look at the directories named pcmXY, where
>>>>> X is
>>>>> the device number and Y is either c (capture) or p (playback).
>>>>> Important
>>>>> is the device number.
>>>>> Normally 0 is the audio device, and the modem is 1. But it can be any
>>>>> other number also. Look in one of the directories with the higher
>>>>> number
>>>>> at the file named "info". It should clearly point out whether its the
>>>>> audio or the modem device.
>>>> Can't say it does (for me at least), but playback only wouldn't
>>>> make too
>>>> much sense, right?
>>>>
>>>> # cat /proc/asound/card0/pcm1p/info
>>>>
>>>> card: 0
>>>> device: 1
>>>> subdevice: 0
>>>> stream: PLAYBACK
>>>> id: trident_dx_nx IEC958
>>>> name: Trident 4DWave IEC958
>>>> subname: subdevice #0
>>>> class: 0
>>>> subclass: 0
>>>> subdevices_count: 1
>>>> subdevices_avail: 1
>>>>
>>>> # cat /proc/asound/card0/pcm0c/info
>>>> card: 0
>>>> device: 0
>>>> subdevice: 0
>>>> stream: CAPTURE
>>>> id: trident_dx_nx
>>>> name: Trident 4DWave
>>>> subname: subdevice #0
>>>> class: 0
>>>> subclass: 0
>>>> subdevices_count: 1
>>>> subdevices_avail: 0
>>>>
>>>> # cat /proc/asound/card0/pcm0p/info
>>>> card: 0
>>>> device: 0
>>>> subdevice: 0
>>>> stream: PLAYBACK
>>>> id: trident_dx_nx
>>>> name: Trident 4DWave
>>>> subname: subdevice #0
>>>> class: 0
>>>> subclass: 0
>>>> subdevices_count: 32
>>>> subdevices_avail: 31
>>>>
>>>>
>>>>> If you found the modem device, restart
>>>>> slmodemd with hw:0,X. Where X is the number from the pcmXY directory.
>>>>> This tells slmodemd, which sub device to use.
>>>> # sudo ./SLMODEMD-1.0.13/slmodemd -d2 -c GERMANY --alsa hw:0,1
>>>> error: alsa setup: cannot open playback device 'hw:0,1': No such
>>>> file or
>>>> directory
>>>>
>>>> error: cannot setup device `hw:0,1'
>>>>
>>>> # sudo ./SLMODEMD-1.0.13/slmodemd -d2 -c GERMANY --alsa hw:0,0
>>>> SmartLink Soft Modem: version 2.9.11 May  5 2007 01:31:04
>>>> <743.689064> SmartLink Soft Modem: version 2.9.11 May  5 2007 01:31:04
>>>> <743.689271> hw:0,0: startup modem...
>>>> <743.689737> hw:0,0: update termios...
>>>> symbolic link `/dev/ttySL0' -> `/dev/pts/0' created.
>>>> modem `hw:0,0' created. TTY is `/dev/pts/0'
>>>> <743.692947> open file: /var/lib/slmodem/data.hw:0,0...
>>>> <743.695291> main: rt applyed: SCHED_FIFO, pri 99
>>>> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
>>>>
>>>>
>>>> wvdial fails like before.
>>>>
>>>> Is it relevant that slamr identifies a SiS630 card
>>>> # dmesg |grep slamr
>>>> [ 3356.143884] slamr: module license 'Smart Link Ltd.' taints kernel.
>>>> [ 3356.288180] slamr: SmartLink AMRMO modem.
>>>> [ 3356.288435] slamr: probe 1039:7013 SiS630 card...
>>>> [ 3356.392764] slamr: mc97 codec is SIL22
>>>> [ 3356.392879] slamr: slamr0 is SiS630 card.
>>>>
>>>> but apart from that SiS630 is never mentioned?
>


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux