Re: SM56, Italy Fedora Core release 6 (Zod) kernel 2.6.20-1.2933.fc6

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



OK!

Thanks for your help,
Oskar



Marvin Stodolsky wrote:
RE: > cannot setup hw params for playback: Invalid argument
Additionally, this response likely reflects an independent bug in
snd-hda-intel, which has inadvertently killed some modems.  A "fix"
eliminated service at 9600 mH, which was not manifestly needed for
anything.  However, there is a constitutent of Proprietary slmodemd
code pre-compiled by Smartlink, inc., which requires 9600 services.
slmodemd maintainer Sasha K recognized this problem and  advised the
ALSA snd-hda-intel maintainer, TI.  TI has provided the first version
of a correction,  However while it cured the
cannot setup hw params for playback: Invalid argument
it has not fully supported a dialout yet.

All will be alerted when the fix is complete.

MarvS

On 4/18/07, Stuffer Oskar <oskar@xxxxxx> wrote:
Hallo,

I had already tried to use wvdial and I also added the "Carrier Check = no"
option to the configuration file but dialing out with wvdial I got
the "NO CARRIER" error.

from slmodemd I got this error:
cannot setup hw params for playback: Invalid argument


bye,
Oskar


Marvin Stodolsky wrote:
> Stuffer,
>
> ALSA support for the ALC88N audio+modems isn't mature yet.
> However you should try wvdial rather than minicom. Do
> $  su - root
> # wvdialconf  wvtest
> If the modem is detected,  Edit in your personal info with:
> # gedit  wvtest
> adding a line
> Carrier Check =  no
> THen try a dialout with:
> #  wvdial  --config wvtest
>
> MarvS
> scanModem maintainer
>
>
> On 4/17/07, Stuffer Oskar <oskar@xxxxxx> wrote:
>> Hallo!
>>
>> I started:
>>
>> slmodemd --alsa hw:0,6 -c ITALY --daemon
>>
>> for Motorola SM56 modem support on my Fujitsu Siemens Amilo Xi1554
>> notebook.
>> When I test the modem with minicom the
>>
>> AT S7=455 S0=0 L1 V1 X4 &c1 E1 Q0
>>
>> command returns an
>> OK.
>>
>> but
>>
>> ATDT0471020000
>>
>> returns
>> NO CARRIER
>> ERROR
>>
>> How may I fix this error?
>>
>>
>> Thanks,
>> Oskar
>>
>>
>>
>>  Only plain text email is forwarded by the  DISCUSS@xxxxxxxxxxxxx List
>> Server.
>>  Do use the following as the email Subject Line:
>>            SomeName, YourCountry Fedora Core release 6 (Zod)
>> Kernel  kernel 2.6.20-1.2933.fc6
>> This will alert cogent experts, and distinguish cases in the Archives.
>>  YourCountry will enable Country Code guidance.
>>  Occassionally responses are blocked by an Internet Provider mail
>> filters.
>>  So in a day, also check the Archived responses at
>> http://www.linmodems.org .
>>  Local Linux experts can be found through:
>> http://www.linux.org/groups/index.html
>> --------------------------  System information
>> ----------------------------
>> CPU=i686,  Fedora Core release 6 (Zod)
>> Kernel
>> Linux version 2.6.20-1.2933.fc6
>> (brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.1 20070105
>> (Red Hat 4.1.1-51)) #1 SMP Mon Mar 19 11:38:26 EDT 2007
>>  scanModem update of:  2007_March_15
>>
>>
>> USB modem not detected by lsusb
>>
>> Modem or host audio card candidates have firmware information:
>>
>>  PCI slot       PCI ID          SubsystemID     Name
>>  ----------     ---------       ---------       --------------
>>  00:1b.0        8086:27d8       1734:10ac       Audio device: Intel
>> Corporation 82801G
>>
>>  Modem interrupt assignment and sharing:
>>  21:        255       3219   IO-APIC-fasteoi   HDA Intel
>>
>>  --- Bootup diagnositcs for card in PCI slot 00:1b.0 ----
>> ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
>> PCI: Setting latency timer of device 0000:00:1b.0 to 64
>>
>>  === Finished modem firmware and bootup diagnostics section. ===
>>  === Next deducing cogent software ===
>>
>> ALSAversion 1.0.14rc1
>> 8086:27d8 is a High Definition Audio card, possibly hosting a soft modem.
>>
>>
>> There may be novel modem chipset information within the /proc/asound/
>> files. They have been copied and packed into a file: Modem/ALC885.tgz
>> Please send ALC885.tgz to the scanModem maintainer:
>> Marvin.Stodolsky@xxxxxxxxx
>>
>>  For candidate modem in PCI bus:  00:1b.0
>>    Class 0403: 8086:27d8 Audio device: Intel Corporation 82801G
>>       Primary PCI_id  8086:27d8
>>     Subsystem PCI_id  1734:10ac
>>     Softmodem codec or Vendor from diagnostics: ALC885
>>                               from    Archives:
>>
>>
>> Lacking a dsp (digital signal processing) chip, the modem is a software
>>  intensive or "softmodem" type. Its primary controller manages the
>> traffic
>>  with the CPU. But the software needed is specified in the Subsystem.
>>  -----------------------------------------
>> Support type needed or chipset: slmodemd
>>
>> An ALSA (Advanced Linux Sound Architecture) modem driver: snd-hda-intel
>>  provides Low Level support enabling contact with the modem hardware.
>>  For all BUT Conexant chip soft modems (using hsfmodem software)
>>  complementary High Level support is through a Smartlink utility:
>> slmodemd
>>
>>  Download from http://linmodems.technion.ac.il/packages/smartlink/
>>  the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack
>> under Linux with:
>>         $ tar zxf SLMODEMD.gcc4.1.tar.gz
>>  and read instructions therein. But briefly, the modem is setup with
>> command:
>>          slmodemd -c YOUR_COUNTRY --alsa hw:0,6
>>  reporting dynamic creation of ports:
>>         /dev/ttySL0 --> /dev/pts/N   , with N some number
>> Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
>>
>>  Already loaded into the kernel is snd-hda-intel and audio drivers it
>> depends on,
>>  displayed by:  lsmod | grep snd_hda_intel
>> Module                  Size  Used by
>> -------------------------------------
>> snd_hda_intel          24153  2
>> snd_hda_codec         156353  1 snd_hda_intel
>> snd_pcm 75205 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
>> snd                    53829  11
>> snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
>>
>> snd_page_alloc         13769  2 snd_hda_intel,snd_pcm
>>
>>
>> The diagnostic outputs for this softmodem section have their raw
>> information in
>> folders and text files under /proc/asound/ which you can browse. The
>> information
>> is from files:
>>         /proc/asound/pcm
>> -------------------------------
>> 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
>> 00-02: ALC882 Analog : ALC882 Analog : capture 2
>> 00-01: ALC882 Digital : ALC882 Digital : playback 1
>> 00-00: ALC882 Analog : ALC882 Analog : playback 1 : capture 2
>>
>>         /proc/asound/modules
>> -------------------------------
>>  0 snd_hda_intel
>>         /proc/asound/card0/codec#1
>> -------------------------------
>> Codec: Realtek ALC885
>> Address: 1
>> Vendor Id: 0x10ec0885
>> Subsystem Id: 0x173410ac
>> Revision Id: 0x100101
>> Default PCM:
>>     rates [0x560]: 44100 48000 96000 192000
>>     bits [0xe]: 16 20 24
>>     formats [0x1]: PCM
>> Default Amp-In caps: N/A
>> Default Amp-Out caps: N/A
>> Node 0x02 [Audio Output] wcaps 0x11: Stereo
>>   PCM:
>>     rates [0x560]: 44100 48000 96000 192000
>>     bits [0xe]: 16 20 24
>>     formats [0x1]: PCM
>> Node 0x03 [Audio Output] wcaps 0x11: Stereo
>>   PCM:
>>     rates [0x560]: 44100 48000 96000 192000
>>     bits [0xe]: 16 20 24
>>     formats [0x1]: PCM
>> Node 0x04 [Audio Output] wcaps 0x11: Stereo
>>   PCM:
>>     rates [0x560]: 44100 48000 96000 192000
>>     bits [0xe]: 16 20 24
>>     formats [0x1]: PCM
>> Node 0x05 [Audio Output] wcaps 0x11: Stereo
>>   PCM:
>>     rates [0x560]: 44100 48000 96000 192000
>>     bits [0xe]: 16 20 24
>>     formats [0x1]: PCM
>> Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
>>   PCM:
>>     rates [0x5e0]: 44100 48000 88200 96000 192000
>>     bits [0x1e]: 16 20 24 32
>>     formats [0x1]: PCM
>> Node 0x07 [Audio Input] wcaps 0x10011b: Stereo Amp-In
>>   Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1
>>   Amp-In vals:  [0x17 0x17]
>>   PCM:
>>     rates [0x560]: 44100 48000 96000 192000
>>     bits [0xe]: 16 20 24
>>     formats [0x1]: PCM
>>   Connection: 1
>>      0x24
>> Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
>>   Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1
>>   Amp-In vals:  [0x80 0x80]
>>   PCM:
>>     rates [0x560]: 44100 48000 96000 192000
>>     bits [0xe]: 16 20 24
>>     formats [0x1]: PCM
>>   Connection: 1
>>      0x23
>> Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
>>   Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1
>>   Amp-In vals:  [0x00 0x00]
>>   PCM:
>>     rates [0x560]: 44100 48000 96000 192000
>>     bits [0xe]: 16 20 24
>>     formats [0x1]: PCM
>>   Connection: 1
>>      0x22
>> Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
>>   PCM:
>>     rates [0x560]: 44100 48000 96000 192000
>>     bits [0x1e]: 16 20 24 32
>>     formats [0x1]: PCM
>>   Connection: 1
>>      0x1f
>> Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
>>   Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
>>   Amp-In vals:  [0x98 0x98] [0x92 0x92] [0x95 0x95] [0x00 0x00] [0x19
>> 0x19] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97]
>>   Connection: 10
>>      0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17
>> Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
>>   Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
>>   Amp-In vals:  [0x00 0x00] [0x00 0x00]
>>   Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
>>   Amp-Out vals:  [0x40 0x40]
>>   Connection: 2
>>      0x02 0x0b
>> Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
>>   Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
>>   Amp-In vals:  [0x00 0x00] [0x00 0x00]
>>   Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
>>   Amp-Out vals:  [0x32 0x32]
>>   Connection: 2
>>      0x03 0x0b
>> Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
>>   Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
>>   Amp-In vals:  [0x00 0x00] [0x00 0x00]
>>   Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
>>   Amp-Out vals:  [0x00 0x00]
>>   Connection: 2
>>      0x04 0x0b
>> Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
>>   Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
>>   Amp-In vals:  [0x00 0x00] [0x00 0x00]
>>   Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
>>   Amp-Out vals:  [0x00 0x00]
>>   Connection: 2
>>      0x05 0x0b
>> Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
>> Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
>> Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono
>> Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
>> Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
>>   Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
>>   Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00
>> 0x00]
>>   Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
>>   Amp-Out vals:  [0x00 0x00]
>>   Pincap 0x08373c: IN OUT HP Detect
>>   Pin Default 0x01014010: [Jack] Line Out at Ext Rear
>>     Conn = 1/8, Color = Green
>>   Pin-ctls: 0x40: OUT
>>   Connection: 5
>>      0x0c* 0x0d 0x0e 0x0f 0x26
>> Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
>>   Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
>>   Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00
>> 0x00]
>>   Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
>>   Amp-Out vals:  [0x00 0x00]
>>   Pincap 0x08373c: IN OUT HP Detect
>>   Pin Default 0x99230120: [Fixed] HP Out at Int ATAPI
>>     Conn = ATAPI, Color = Unknown
>>   Pin-ctls: 0xc0: OUT HP
>>   Connection: 5
>>      0x0c* 0x0d 0x0e 0x0f 0x26
>> Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
>>   Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
>>   Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00
>> 0x00]
>>   Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
>>   Amp-Out vals:  [0x80 0x80]
>>   Pincap 0x083c: IN OUT HP Detect
>>   Pin Default 0x99030130: [Fixed] Line Out at Int ATAPI
>>     Conn = ATAPI, Color = Unknown
>>   Pin-ctls: 0x20: IN
>>   Connection: 5
>>      0x0c 0x0d 0x0e* 0x0f 0x26
>> Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
>>   Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
>>   Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00
>> 0x00]
>>   Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
>>   Amp-Out vals:  [0x80 0x80]
>>   Pincap 0x083c: IN OUT HP Detect
>>   Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
>>     Conn = 1/8, Color = Black
>>   Pin-ctls: 0x20: IN
>>   Connection: 5
>>      0x0c 0x0d 0x0e 0x0f* 0x26
>> Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
>>   Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
>>   Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00
>> 0x00]
>>   Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
>>   Amp-Out vals:  [0x80 0x80]
>>   Pincap 0x08373c: IN OUT HP Detect
>>   Pin Default 0x01a19850: [Jack] Mic at Ext Rear
>>     Conn = 1/8, Color = Pink
>>   Pin-ctls: 0x24: IN
>>   Connection: 5
>>      0x0c* 0x0d 0x0e 0x0f 0x26
>> Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
>>   Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
>>   Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00
>> 0x00]
>>   Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
>>   Amp-Out vals:  [0x80 0x80]
>>   Pincap 0x08373c: IN OUT HP Detect
>>   Pin Default 0x99a30151: [Fixed] Mic at Int ATAPI
>>     Conn = ATAPI, Color = Unknown
>>   Pin-ctls: 0x24: IN
>>   Connection: 5
>>      0x0c* 0x0d 0x0e 0x0f 0x26
>> Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
>>   Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
>>   Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00
>> 0x00]
>>   Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
>>   Amp-Out vals:  [0x80 0x80]
>>   Pincap 0x08373c: IN OUT HP Detect
>>   Pin Default 0x0181305f: [Jack] Line In at Ext Rear
>>     Conn = 1/8, Color = Blue
>>   Pin-ctls: 0x20: IN
>>   Connection: 5
>>      0x0c* 0x0d 0x0e 0x0f 0x26
>> Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
>>   Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
>>   Amp-In vals:  [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00
>> 0x00]
>>   Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
>>   Amp-Out vals:  [0x80 0x80]
>>   Pincap 0x08373c: IN OUT HP Detect
>>   Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
>>     Conn = 1/8, Color = Black
>>   Pin-ctls: 0x20: IN
>>   Connection: 5
>>      0x0c* 0x0d 0x0e 0x0f 0x26
>> Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
>>   Pincap 0x0820: IN
>>   Pin Default 0x99330152: [Fixed] CD at Int ATAPI
>>     Conn = ATAPI, Color = Unknown
>>   Pin-ctls: 0x20: IN
>> Node 0x1d [Pin Complex] wcaps 0x400000: Mono
>>   Pincap 0x0820: IN
>>   Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
>>     Conn = 1/8, Color = Black
>>   Pin-ctls: 0x20: IN
>> Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
>>   Pincap 0x0810: OUT
>>   Pin Default 0x01454140: [Jack] SPDIF Out at Ext Rear
>>     Conn = Optical, Color = Green
>>   Pin-ctls: 0x40: OUT
>>   Connection: 1
>>      0x06
>> Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
>>   Pincap 0x0820: IN
>>   Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
>>     Conn = 1/8, Color = Black
>>   Pin-ctls: 0x20: IN
>> Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
>> Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono
>> Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
>>   Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
>>   Amp-In vals:  [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80
>> 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
>> [0x80 0x80]
>>   Connection: 11
>>      0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
>> Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
>>   Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
>>   Amp-In vals:  [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80
>> 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
>> [0x80 0x80]
>>   Connection: 11
>>      0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
>> Node 0x24 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
>>   Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
>>   Amp-In vals:  [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80
>> 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
>> [0x80 0x80]
>>   Connection: 11
>>      0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
>> Node 0x25 [Audio Output] wcaps 0x11: Stereo
>>   PCM:
>>     rates [0x560]: 44100 48000 96000 192000
>>     bits [0xe]: 16 20 24
>>     formats [0x1]: PCM
>> Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
>>   Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
>>   Amp-In vals:  [0x00 0x00] [0x00 0x00]
>>   Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
>>   Amp-Out vals:  [0x40 0x40]
>>   Connection: 2
>>      0x25 0x0b
>> -------------------------------
>> Current support status of HDA cards is:
>>   Vendor IDs  Chip maker     Support type
>>   ----------  ----------    -------------
>>   0x14f12bfa  Conexant      hsfmodem , not slmodemd compatible
>>   0x11c13026  AgereSystems  snd-hda-intel, slmodemd supported
>>   0x11c11040  AgereSystems      "             "    , patch needed
>>   0x11c13055  AgereSystems      "             "    ,      "
>>   0x163c3055  Smartlink         "             "    ,      "
>>   0x163c3155    "               "             "    ,      "
>>   0x10573055  Motorola          "             "    ,      "
>>   0x10573155     "              "             "    ,      ""
>> as of October 2006.
>>
>> and from the command:
>>         aplay -l | grep -i modem
>> card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]
>>
>> ----------------end Softmodem section --------------
>>
>> Writing Intel.txt
>> Writing Smartlink.txt
>> ============ end Smartlink section =====================
>>
>>  Completed candidate modem analyses.
>>
>>  The base of the UDEV device file system is: /dev/.udev
>>
>>  Versions adequately match for the compiler installed: 4.1.1
>>              and the compiler used in kernel assembly: 4.1.1
>>
>> Kernel-header resources needed for compiling are not manifestly ready!
>>
>>  If compiling is necessary packages must be installed, providing:
>>          kernel-source-2.6.20-1.2933.fc6
>>
>>
>> Checking pppd properties:
>>         -r-xr-xr-x 1 root root 312492 Dec  1 13:51 /usr/sbin/pppd
>>
>> In case of an "error 17" "serial loopback" problem, see:
>>     http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
>>
>> To enable dialout without Root permission do:
>>         $ su - root  (not for Ubuntu)
>>          chmod a+x /usr/sbin/pppd
>> or under Ubuntu related Linuxes
>>          chmod a+x /usr/sbin/pppd
>>
>> Checking settings of:   /etc/ppp/options
>> lock
>>
>> In case of a message like:
>>    Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
>> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>>
>> Read Modem/YourSystem.txt concerning other COMM channels: vmnet1 vmnet8
>> Which can interfere with Browser naviagation.
>>
>>  Don't worry about the following, it is for the experts
>>  should trouble shooting be necessary.
>> ==========================================================
>>
>>  Checking for modem support lines:
>>  --------------------------------------
>>      /device/modem symbolic link:
>> slmodemd created symbolic link /dev/ttySL0:
>>      Within /etc/udev/ files:
>> /etc/udev/rules.d/50-udev.rules:KERNEL=="modems/mwave*",
>> NAME="%k", GROUP="uucp", MODE="0660"
>>      Within /etc/modprobe.conf files:
>>
>>      Within any ancient /etc/devfs files:
>>
>>      Within ancient kernel 2.4.n /etc/module.conf files:
>>
>> --------- end modem support lines --------
>>
>>
>>
>>
>
>






[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux