Hi folks,
because there is no GLIBC_2.4 in Debian etch, I can not use the package
SLMODEMD.gcc4.1.tar.gz. So I compiled slmodemd from the package
slmodem-2.9.11-20070204.tar.gz, I got from
http://linmodems.technion.ac.il/packages/smartlink/.
Calling slmodemd (as root) by:
>slmodemd -c GERMANY --alsa modem:1
produces the output:
SmartLink Soft Modem: version 2.9.11 Apr 9 2007 10:15:19
symbolic link `/dev/ttySL0' -> `/dev/pts/3' created.
modem `modem:1' created. TTY is `/dev/pts/3'
Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
Now I can access the modem in Minicom by AT-commands but with
ATDTnnnnn
the modem doesn't dial and nothing happens. After a while
NO CARRIER
is issued.
Can anybody help me?
------------------------------------------------------------------------
Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server.
Do use the following as the email Subject Line:
SomeName, YourCountry Debian GNU/Linux 4.0 kernel 2.6.18-3-686
This will alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org .
Local Linux experts can be found through: http://www.linux.org/groups/index.html
-------------------------- System information ----------------------------
CPU=i686, Debian GNU/Linux 4.0
Linux version 2.6.18-3-686 (Debian 2.6.18-7) (waldi@xxxxxxxxxx) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-20)) #1 SMP Mon Dec 4 16:41:14 UTC 2006
scanModem update of: 2007_March_15
The modem symbolic link is /dev/modem -> ttySL0
USB modem not detected by lsusb
Modem or host audio card candidates have firmware information:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:11.6 1106:3068 1734:1078 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller
Modem interrupt assignment and sharing:
11: 152613 XT-PIC ehci_hcd:usb3, VIA8233, eth-wifi, VIA82XX-MODEM
--- Bootup diagnositcs for card in PCI slot 00:11.6 ----
PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:11.6 to 64
ACPI: PCI interrupt for device 0000:00:11.6 disabled
PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:11.6 to 64
The PCI slot 00:11.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
ALSAversion 1.0.13
The audio card is not a modem hosting type.
For candidate modem in PCI bus: 00:11.6
Class 0780: 1106:3068 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller
Primary PCI_id 1106:3068
Subsystem PCI_id 1734:1078
Softmodem codec or Vendor from diagnostics: SIL27, an AgereSystems type.
from Archives: SIL27, an AgereSystems type.
Lacking a dsp (digital signal processing) chip, the modem is a software
intensive or "softmodem" type. Its primary controller manages the traffic
with the CPU. But the software needed is specified in the Subsystem.
-----------------------------------------
Support type needed or chipset: slmodemd
An ALSA (Advanced Linux Sound Architecture) modem driver: snd-via82xx-modem
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack under Linux with:
$ tar zxf SLMODEMD.gcc4.1.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
slmodemd -c YOUR_COUNTRY --alsa modem:1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
Already loaded into the kernel is snd-via82xx-modem and audio drivers it depends on,
displayed by: lsmod | grep snd_via82xx_modem
Module Size Used by
-------------------------------------
snd_via82xx_modem 14088 0
snd_ac97_codec 83104 2 snd_via82xx_modem,snd_via82xx
snd_pcm 68644 4 snd_via82xx_modem,snd_via82xx,snd_ac97_codec
snd_page_alloc 9640 3 snd_via82xx_modem,snd_via82xx,snd_pcm
snd 47012 10 snd_via82xx_modem,snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
The diagnostic outputs for this softmodem section have their raw information in
folders and text files under /proc/asound/ which you can browse. The information
is from files:
/proc/asound/pcm
-------------------------------
00-01: VIA 8235 : VIA 8235 : playback 1 : capture 1
00-00: VIA 8235 : VIA 8235 : playback 4 : capture 1
01-00: VIA 82XX modem : VIA 82XX modem : playback 1 : capture 1
/proc/asound/modules
-------------------------------
0 snd_via82xx
1 snd_via82xx_modem
/proc/asound/card1/codec97#0/mc97#1-1+regs
-------------------------------
0:7c = 5349 and 0:7e = 4c27
which were translated from hexadecimal code into: SIL27
/proc/asound/card1/codec97#0/mc97#1-1
-------------------------------
Extended modem ID: codec=1 LIN1
and from the command:
aplay -l | grep -i modem
card 1: modem [VIA 82XX modem], device 0: VIA 82XX modem [VIA 82XX modem]
----------------end Softmodem section --------------
Writing Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.2
and the compiler used in kernel assembly: 4.1.2
Kernel-header resources needed for compiling are not manifestly ready!
If compiling is necessary packages must be installed, providing:
kernel-source-2.6.18-3-686
Compressed files at: /usr/src/sl-modem.tar.bz2
kernel-kbuild is installed
Checking settings of: /etc/ppp/options
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
# start/stop the daemon when the USB modem is connected
KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 6 2007-04-17 11:58 /dev/modem -> ttySL0
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
/etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/alsa-base-blacklist:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/alsa-base-blacklist:# blacklist snd-atiixp-modem
/etc/modprobe.d/alsa-base-blacklist:# blacklist snd-via82xx-modem
/etc/modprobe.d/slmodem:# /etc/modprobe.d/slmodem
/etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe --ignore-install ungrab-winmodem ; modprobe --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0)
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
/etc/modules.conf:options snd-atiixp-modem index=-2
/etc/modules.conf:options snd-via82xx-modem index=-2
/etc/modules.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modules.conf:# alias snd-atiixp-modem off
/etc/modules.conf:# alias snd-via82xx-modem off
/etc/modules.conf.old:options snd-atiixp-modem index=-2
/etc/modules.conf.old:options snd-via82xx-modem index=-2
/etc/modules.conf.old:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modules.conf.old:# alias snd-atiixp-modem off
/etc/modules.conf.old:# alias snd-via82xx-modem off
--------- end modem support lines --------
------------------------------------------------------------------------
CPU0
0: 1205609 XT-PIC timer
1: 1486 XT-PIC i8042
2: 0 XT-PIC cascade
7: 0 XT-PIC uhci_hcd:usb1
9: 10 XT-PIC acpi
10: 501726 XT-PIC uhci_hcd:usb2, yenta
11: 152616 XT-PIC ehci_hcd:usb3, VIA8233, eth-wifi, VIA82XX-MODEM
12: 128 XT-PIC i8042
14: 23461 XT-PIC ide0
15: 42925 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
MIS: 0
Linux version 2.6.18-3-686 (Debian 2.6.18-7) (waldi@xxxxxxxxxx) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-20)) #1 SMP Mon Dec 4 16:41:14 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000eef0000 (usable)
BIOS-e820: 000000000eef0000 - 000000000eefb000 (ACPI data)
BIOS-e820: 000000000eefb000 - 000000000ef00000 (ACPI NVS)
BIOS-e820: 000000000ef00000 - 000000000f000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
238MB LOWMEM available.
found SMP MP-table at 000f7d10
On node 0 totalpages: 61168
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 57072 pages, LIFO batch:15
DMI present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f7ce0
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x0eef6133
ACPI: FADT (v001 PN800 PTLTW 0x06040000 PTL_ 0x000f4240) @ 0x0eefaf8c
ACPI: DSDT (v001 FIC sisiP 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
SMP mptable: bad signature [0x0]!
BIOS bug, MP table errors detected!...
... disabling SMP support. (tell your hw vendor)
Allocating PCI resources starting at 10000000 (gap: 0f000000:f0f80000)
Detected 1496.364 MHz processor.
Built 1 zonelists. Total pages: 61168
Kernel command line: root=/dev/hda1 ro
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (011e9000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 234936k/244672k available (1543k kernel code, 9196k reserved, 574k data, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2995.60 BogoMIPS (lpj=5991212)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: afe9f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: afe9f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0c80)
CPU0: Intel(R) Celeron(R) M processor 1.50GHz stepping 08
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 4398k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd90c, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 4000-407f claimed by vt8235 PM
PCI quirk: region 8100-810f claimed by vt8235 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *7, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *10, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *11, disabled.
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11)
ACPI: Power Resource [FN10] (off)
ACPI: Power Resource [FN11] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 9 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Failed to allocate mem resource #6:10000@f4000000 for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: d1000000-d1ffffff
PREFETCH window: f0000000-f3ffffff
PCI: Bus 2, cardbus bridge: 0000:00:0c.0
IO window: 00002000-000020ff
IO window: 00002400-000024ff
PREFETCH window: 10000000-11ffffff
MEM window: 12000000-13ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1176803876.040:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI No-Shortcut mode
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 196k freed
Time: tsc clocksource has been installed.
ACPI: Transitioning device [FN1] to D3
ACPI: Transitioning device [FN1] to D3
ACPI: Fan [FN1] (off)
ACPI: Transitioning device [FN2] to D3
ACPI: Transitioning device [FN2] to D3
ACPI: Fan [FN2] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (44 C)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 7, io base 0x00001020
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 10, io base 0x00001040
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:10.3: irq 11, io mem 0xd0000000
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
input: AT Translated Set 2 keyboard as /class/input/input0
Time: acpi_pm clocksource has been installed.
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
eth0: VIA Rhine II at 0x11c00, 00:40:ca:d3:94:95, IRQ 7.
eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
PCI: VIA IRQ fixup for 0000:00:11.1, from 0 to 7
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: SAMSUNG MP0402H, ATA DISK drive
usb 2-1: new full speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
usb 2-2: new low speed USB device using uhci_hcd and address 3
usb 2-2: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
input: PATEN USB Receiver as /class/input/input1
input: USB HID v1.10 Mouse [PATEN USB Receiver] on usb-0000:00:10.1-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
hdc: PHILIPS CD-RW/DVD-ROM SCB5265, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 78140161 sectors (40007 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 >
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset
agpgart: AGP aperture is 128M @ 0xd8000000
ts: Compaq touchscreen protocol output
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
irda_init()
NET: Registered protocol family 23
Bluetooth: HCI USB driver ver 2.9
input: PC Speaker as /class/input/input2
usbcore: registered new driver hci_usb
Yenta: CardBus bridge found at 0000:00:0c.0 [1734:1078]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0c.0, mfunc 0x01021002, devctl 0x44
slamr: module license 'Smart Link Ltd.' taints kernel.
slamr: SmartLink AMRMO modem.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Yenta: ISA IRQ mask 0x0078, PCI irq 10
Socket status: 30000006
PCI: Enabling device 0000:00:06.0 (0010 -> 0012)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
rt2500 1.1.0 CVS 2005/07/10 http://rt2x00.serialmonkey.com
slamr: probe 1106:3068 VIA3058 card...
PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:11.6 to 64
slamr: mc97 codec is SIL27
slamr: slamr0 is VIA3058 card.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:11.5 to 64
input: PS/2 Mouse as /class/input/input3
input: AlpsPS/2 ALPS GlidePoint as /class/input/input4
cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
Adding 714852k swap on /dev/hda5. Priority:-1 extents:1 across:714852k
EXT3 FS on hda1, internal journal
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@xxxxxxxxxx
pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
eth-wifi: no IPv6 routers present
ACPI: PCI interrupt for device 0000:00:11.6 disabled
PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:11.6 to 64
