Ok, maybe this is one of those cases in which you need to update alsa to a newer version and recompile. Or instead of --alsa modem:1, try something like # slmodemd -c URUGUAY --alsa hw 0:6, I am not sure or could be that the modem card is disabled in the bootup process as the lines show, The PCI slot 00:1f.6 of the modem card may be disabled early in a bootup process, but then enabled later. If modem drivers load, but the modem is not responsive, read Bootup.txt about possible fixes. Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx if help is needed. When you do # slmodemd -c URUGUAY --alsa modem:1 open up another terminal and run dmesg and send to discuss@xxxxxxxxxxxxx for further help. Regards, Antonio --- Daniel Stonek <daniel@xxxxxxxxxx> wrote: > Hi Antonio, > I have installed slmodemd (and removed hsfmodem) > but > # slmodemd -c URUGUAY --alsa modem:1 > error: mixer setup: attach hw:1 error: No such > device > ALSA lib pcm.c:2014:(snd_pcm_open_conf) Invalid type > for PCM modem:1 > definition (id: modem, value: cards.pcm.modem) > error: alsa setup: cannot open playback device > 'modem:1': Invalid argument > error: cannot setup device `modem:1' > > Thank you, > Daniel > > On Friday 16 March 2007 11:16, you wrote: > > Daniel, > > > > The following tells you what you need to do. > > > > Support type needed or chipset: slmodemd > > > > An ALSA (Advanced Linux Sound Architecture) modem > > driver: > > snd-intel8x0m > > provides Low Level support enabling contact with > the > > modem hardware. > > For all BUT Conexant chip soft modems (using > hsfmodem > > software) > > complementary High Level support is through a > > Smartlink utility: > > slmodemd > > > > Download from > > > http://linmodems.technion.ac.il/packages/smartlink/ > > the package SLMODEMD.gcc4.1.tar.gz having a > compiled > > slmodemd. Unpack > > under Linux with: > > $ tar zxf SLMODEMD.gcc4.1.tar.gz > > and read instructions therein. But briefly, the > modem > > is setup with > > command: > > slmodemd -c YOUR_COUNTRY --alsa modem:1 > > reporting dynamic creation of ports: > > /dev/ttySL0 --> /dev/pts/N , with N some > > number > > Read Smartlink.txt and Modem/YourSystem.txt for > > follow through > > guidance. > > > > Regards, > > > > Antonio > > > > --- Daniel Stonek <daniel@xxxxxxxxxx> wrote: > > > Please tell me how to install a working driver. > > > Thank you. Daniel > > > > > > > Only plain text email is forwarded by the > > > > > > DISCUSS@xxxxxxxxxxxxx List Server. > > > Do use the following as the email Subject Line: > > > SomeName, YourCountry Mandriva Linux > > > release 2007.0 (Official) for i586 > > > Kernel 2.6.17-5mdv on an i686 / kernel > 2.6.17-5mdv > > > This will alert cogent experts, and > distinguish > > > cases in the Archives. > > > YourCountry will enable Country Code guidance. > > > Occassionally responses are blocked by an > Internet > > > Provider mail filters. > > > So in a day, also check the Archived responses > at > > > http://www.linmodems.org . > > > Local Linux experts can be found through: > > > http://www.linux.org/groups/index.html > > > -------------------------- System information > > > ---------------------------- > > > CPU=i686, Mandriva Linux release 2007.0 > (Official) > > > for i586 > > > Kernel 2.6.17-5mdv on an i686 / > > > Linux version 2.6.17-5mdv > (rtp@xxxxxxxxxxxxxxxxxxxx) > > > (gcc version 4.1.1 20060724 (prerelease) > > > (4.1.1-3mdk)) #1 SMP Wed Sep 13 14:32:31 EDT > 2006 > > > scanModem update of: 2007_March_05 > > > The modem symbolic link is /dev/modem -> > ttySHSF0 > > > > > > USB modem not detected by lsusb > > > > > > Modem or host audio card candidates have > firmware > > > information: > > > > > > PCI slot PCI ID SubsystemID Name > > > ---------- --------- --------- -------------- > > > 00:1f.6 8086:24c6 1025:003d Modem: Intel > > > Corporation 82801DB/DBL/DBM > > > > > > Modem interrupt assignment and sharing: > > > 10: 33802 XT-PIC uhci_hcd:usb1, > > > uhci_hcd:usb2, uhci_hcd:usb3, ehci_hcd:usb4, > > > ohci1394, yenta, Intel 82801DB-ICH4, eth0, eth2, > > > i915@pci:0000:00:02.0 > > > > > > --- Bootup diagnositcs for card in PCI slot > 00:1f.6 > > > ---- > > > ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link > [LNKB] > > > -> GSI 10 (level, low) -> IRQ 10 > > > ACPI: PCI interrupt for device 0000:00:1f.6 > disabled > > > ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link > [LNKB] > > > -> GSI 10 (level, low) -> IRQ 10 > > > PCI: Setting latency timer of device > 0000:00:1f.6 to > > > 64 > > > ACPI: PCI interrupt for device 0000:00:1f.6 > disabled > > > hsfich: probe of 0000:00:1f.6 failed with error > -5 > > > > > > The PCI slot 00:1f.6 of the modem card may be > > > disabled early in > > > a bootup process, but then enabled later. If > modem > > > drivers load > > > but the modem is not responsive, read > Bootup.txt > > > about possible fixes. > > > Send dmesg.txt along with ModemData.txt to > > > discuss@xxxxxxxxxxxxx > > > if help is needed. > > > > > > > > > === Finished modem firmware and bootup > diagnostics > > > section. === > > > === Next deducing cogent software === > > > > > > ALSAversion 1.0.12 > > > The audio card is not a modem hosting type. > > > Bootup diagnostic HSF: ERROR: SILICON > Laboratories > > > or LUCENT AC97 modem detected!<3> > > > HSF: ERROR: This driver only supports CONEXANT > > > devices<3> > > > HSF: ERROR: not a Conexant modem<3> > > > For candidate modem in PCI bus: 00:1f.6 > > > Class 0703: 8086:24c6 Modem: Intel > Corporation > > > 82801DB/DBL/DBM > > > Primary PCI_id 8086:24c6 > > > Subsystem PCI_id 1025:003d > > > Softmodem codec or Vendor from diagnostics: > > > from Archives: > > > SIL27, an AgereSystems type. > > > > > > > > > Lacking a dsp (digital signal processing) chip, > the > > > modem is a software > > > intensive or "softmodem" type. Its primary > > > controller manages the traffic > > > with the CPU. But the software needed is > specified > > > in the Subsystem. > > > ----------------------------------------- > > > Support type needed or chipset: slmodemd > > > > > > An ALSA (Advanced Linux Sound Architecture) > modem > > > driver: snd-intel8x0m > > > provides Low Level support enabling contact > with > > > the modem hardware. > > > For all BUT Conexant chip soft modems (using > > > hsfmodem software) > > > complementary High Level support is through a > > > Smartlink utility: slmodemd > > > > > > Download from > > > > http://linmodems.technion.ac.il/packages/smartlink/ > > > the package SLMODEMD.gcc4.1.tar.gz having a > > > compiled slmodemd. Unpack under Linux with: > > > $ tar zxf SLMODEMD.gcc4.1.tar.gz > > > and read instructions therein. But briefly, the > === message truncated === ____________________________________________________________________________________ Be a PS3 game guru. Get your game face on with the latest PS3 news and previews at Yahoo! Games. http://videogames.yahoo.com/platform?platform=120121
