Re: My ModemData.txt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Daniel,
If you look below, in the ModemData.txt which you sent, for
Support type needed or chipset:	slmodemd
you will find full instructions.

Jacques

Daniel Stonek wrote:
Please tell me how to install a working driver. Thank you. Daniel


------------------------------------------------------------------------

 Only plain text email is forwarded by the  DISCUSS@xxxxxxxxxxxxx List Server.
 Do use the following as the email Subject Line:
           SomeName, YourCountry Mandriva Linux release 2007.0 (Official) for i586
Kernel 2.6.17-5mdv on an i686 / kernel 2.6.17-5mdv This will alert cogent experts, and distinguish cases in the Archives.
 YourCountry will enable Country Code guidance.
 Occassionally responses are blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org .
 Local Linux experts can be found through: http://www.linux.org/groups/index.html
--------------------------  System information ----------------------------
CPU=i686,  Mandriva Linux release 2007.0 (Official) for i586
Kernel 2.6.17-5mdv on an i686 / Linux version 2.6.17-5mdv (rtp@xxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.1 20060724 (prerelease) (4.1.1-3mdk)) #1 SMP Wed Sep 13 14:32:31 EDT 2006
 scanModem update of:  2007_March_05
The modem symbolic link is /dev/modem -> ttySHSF0

USB modem not detected by lsusb

Modem or host audio card candidates have firmware information:

 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
00:1f.6 8086:24c6 1025:003d Modem: Intel Corporation 82801DB/DBL/DBM Modem interrupt assignment and sharing: 10: 33802 XT-PIC uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, ehci_hcd:usb4, ohci1394, yenta, Intel 82801DB-ICH4, eth0, eth2, i915@pci:0000:00:02.0

 --- Bootup diagnositcs for card in PCI slot 00:1f.6 ----
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.6 to 64
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
hsfich: probe of 0000:00:1f.6 failed with error -5

The PCI slot 00:1f.6 of the modem card may be disabled early in a bootup process, but then enabled later. If modem drivers load but the modem is not responsive, read Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 === Finished modem firmware and bootup diagnostics section. ===
 === Next deducing cogent software ===

ALSAversion 1.0.12
The audio card is not a modem hosting type.
Bootup diagnostic HSF: ERROR: SILICON Laboratories or LUCENT AC97 modem detected!<3>
HSF: ERROR: This driver only supports CONEXANT devices<3>
HSF: ERROR: not a Conexant modem<3>
 For candidate modem in PCI bus:  00:1f.6
   Class 0703: 8086:24c6 Modem: Intel Corporation 82801DB/DBL/DBM
      Primary PCI_id  8086:24c6
Subsystem PCI_id 1025:003d Softmodem codec or Vendor from diagnostics: from Archives: SIL27, an AgereSystems type. Lacking a dsp (digital signal processing) chip, the modem is a software intensive or "softmodem" type. Its primary controller manages the traffic with the CPU. But the software needed is specified in the Subsystem.
 -----------------------------------------
Support type needed or chipset:	slmodemd

 An ALSA (Advanced Linux Sound Architecture) modem driver:  snd-intel8x0m
 provides Low Level support enabling contact with the modem hardware.
 For all BUT Conexant chip soft modems (using hsfmodem software)
 complementary High Level support is through a Smartlink utility:  slmodemd

Download from http://linmodems.technion.ac.il/packages/smartlink/ the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack under Linux with:
 	$ tar zxf SLMODEMD.gcc4.1.tar.gz
 and read instructions therein. But briefly, the modem is setup with command:
slmodemd -c YOUR_COUNTRY --alsa modem:1 reporting dynamic creation of ports:
	/dev/ttySL0 --> /dev/pts/N   , with N some number
 Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.


The diagnostic outputs for this softmodem section have their raw information in
folders and text files under /proc/asound/ which you can browse. The information
is from files:
	/proc/asound/pcm
-------------------------------
00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1
00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1
00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1
00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1
00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1

	/proc/asound/modules
-------------------------------
 0 snd_intel8x0
and from the command:
	aplay -l | grep -i modem


----------------end Softmodem section --------------

Writing Intel.txt
Writing Smartlink.txt
============ end Smartlink section =====================

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev
/dev/.udevdb

 Versions adequately match for the compiler installed: 4.1.1
             and the compiler used in kernel assembly: 4.1.1

 Kernel-header resources needed for compiling are not manifestly ready!

 If compiling is necessary packages must be installed, providing:
	 kernel-source-2.6.17-5mdv

Checking settings of:	/etc/ppp/options


In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/YourSystem.txt concerning other COMM channels: eth0 eth2
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   lrwxrwxrwx 1 root root 8 Mar 12 17:53 /dev/modem -> ttySHSF0
slmodemd created symbolic link /dev/ttySL0: Within /etc/udev/ files:
/etc/udev/rules.d/hsf.rules:KERNEL=="ttySHSF0", SYMLINK="modem"
     Within /etc/modprobe.conf files:
/etc/modprobe.conf:install snd-via82xx-modem /bin/true
/etc/modprobe.conf:install snd-atiixp-modem /bin/true
/etc/modprobe.conf:install snd-via82xx-modem /bin/true # temporarily disabled by hsf - conflicts with hsfmc97via
/etc/modprobe.conf:install snd-atiixp-modem /bin/true # temporarily disabled by hsf - conflicts with hsfmc97ati
/etc/modprobe.conf:alias /dev/modem /dev/ttySHSF
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:
/etc/modules.conf:alias /dev/modem /dev/ttySHSF
--------- end modem support lines --------


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux