Hi Well, i´m trying to install my winmodem on linux, but i´m don´t having success. I´m a linux newbie ;D The source package that came with my modem was slmodem-2.9.10, and whem i tried to make this package it did´nt work So, i found linmodems.org, and there are a link to a repository for slmodem, so i downloaded the last version ( slmodel-2.9.11-20070204) The make and make install worked fine with this package, but when i try to use modprobe, i ran into a error. The content of the files and my installarion steps are listed below. I would like to know what can i do to solve the problem. Im using mandriva 2007 free, with kernel 2.6.17-10. Sorry for my english :D Thanx David Bootup.txt A modem device/card may be disabled at bootup, due to a variety of causes. Look at the bootup diagnostics record dmesg.txt written out through: $ dmesg > dmesg.txt and try to garner some understanding from it. Possibilities therein are too diverse to be automagically processed by scanModem. A line including the PCI bus slot 00:11.6 of your modem, and "disable" or "disabling" predicts problems, though sometimes corrected later in the bootup. Similarly a line with "@" in the interrupt (IRQ) for your 00:11.6 slot is predictive of problems. Possible corrections are: 0) Get unloading.gz from http://phep2.technion.ac.il/linmodems/packages/ This script unloads excess drivers which may be competing for resources. Before trying to set up the modem, do: $ gunzip unloading.gz $ chmod +x unloading $ su - root # ./unloading Or for Ubuntu related Distros $ sudo ./unloading 1) Within the boot up BIOS, change from a Windows to a non-PNP/Other Operating System type. Instructions for accessing BIOS are at: http://linmodems.technion.ac.il/resources.html within: Additional Resourcces. 2a) Add an option "pci=routeirq" to the kernel boot up line. Here is an example paragraph from /boot/grub/menu.lst : title Ubuntu, kernel 2.6.15-26-686 root (hd0,6) kernel /boot/vmlinuz-2.6.15-26-686 root=/dev/hda7 ro pci=routeirq initrd /boot/initrd.img-2.6.15-26-686 savedefault 2b) Same as above, but use "pollirq" instead of "pci=routeirq". 3) Within some BIOS setups, IRQ assignments can be changed. 4) On non-laptop systems, moving the modem card to another slot has helped. 5) Sometimes upgrading the kernel solves the problem. 6) Sometimes downgrading the kernel solves the problem. 7) Sometimes changing the Linux distribution solves the problem. dmesg.txt CPU0 0: 99467 IO-APIC-edge timer 1: 802 IO-APIC-edge i8042 8: 1 IO-APIC-edge rtc 9: 0 IO-APIC-level acpi 12: 15061 IO-APIC-edge i8042 14: 3534 IO-APIC-edge ide0 17: 19468 IO-APIC-level libata 18: 269 IO-APIC-level uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, ehci_hcd:usb5 19: 785 IO-APIC-level VIA8237 20: 0 IO-APIC-level skge 21: 23369 IO-APIC-level nvidia NMI: 0 LOC: 99423 ERR: 0 MIS: 0 Linux version 2.6.17-10mdv ( rtp@xxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20070115 (prerelease) ( 4.1.2-0.20070115.1mdv2007.1)) #1 SMP Mon Feb 12 11:16:06 EST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data) BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS) BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 895MB LOWMEM available. found SMP MP-table at 000ff780 On node 0 totalpages: 262064 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225279 pages, LIFO batch:31 HighMem zone: 32689 pages, LIFO batch:7 DMI 2.3 present. ACPI: RSDP (v000 ACPIAM ) @ 0x000fa880 ACPI: RSDT (v001 A M I OEMRSDT 0x10000513 MSFT 0x00000097) @ 0x3ffb0000 ACPI: FADT (v001 A M I OEMFACP 0x10000513 MSFT 0x00000097) @ 0x3ffb0200 ACPI: MADT (v001 A M I OEMAPIC 0x10000513 MSFT 0x00000097) @ 0x3ffb0390 ACPI: OEMB (v001 A M I OEMBIOS 0x10000513 MSFT 0x00000097) @ 0x3ffc0040 ACPI: DSDT (v001 A0277 A0277001 0x00000001 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:7 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000) Built 1 zonelists Kernel command line: BOOT_IMAGE=2.6.17-10 root=807 resume=/dev/sda6 splash=silent bootsplash: silent mode. mapped APIC to ffffe000 (fee00000) mapped IOAPIC to ffffd000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2203.341 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1033688k/1048256k available (2427k kernel code, 13372k reserved, 755k data, 244k init, 130756k highmem, 0k BadRAM) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4411.66 BogoMIPS (lpj=8823332) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed checking if image is initramfs... it is Freeing initrd memory: 455k freed ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. CPU0: AMD Athlon(tm) 64 Processor 3700+ stepping 02 Total of 1 processors activated ( 4411.66 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 Brought up 1 CPUs migration_cost=0 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: enabled onboard AC97/MC97 devices PCI: Quirk-MSI-K8T Soundcard On PCI: Unexpected Value in PCI-Register: no Change! Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 16 devices PnPBIOS: Disabled PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:09: ioport range 0x680-0x6ff has been reserved pnp: 00:09: ioport range 0x290-0x297 has been reserved PCI: Bridge: 0000:00: 01.0 IO window: disabled. MEM window: faf00000-fbffffff PREFETCH window: e0000000-f9ffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1172253999.904:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 3750k, total 262144k vesafb: mode is 800x600x16, linelength=1600, pages=2 vesafb: protected mode interface info at c000:e2e0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 124058 bytes,<6>...found (800x600, 124010 bytes, v3). Console: switching to colour frame buffer device 93x31 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 18 (level, low) -> IRQ 16 ACPI: PCI interrupt for device 0000:00:0d.0 disabled RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 17 PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: TSSTcorp CD-RW/DVD-ROM TS-H492C, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered NET: Registered protocol family 1 Using IPI No-Shortcut mode ACPI wakeup devices: PCI0 PS2K PS2M UAR1 AC97 USB1 USB2 USB3 USB4 EHCI PWRB SLPB ACPI: (supports S0 S1 S3 S4 S5) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 244k freed SCSI subsystem initialized input: AT Translated Set 2 keyboard as /class/input/input0 libata version 1.20 loaded. sata_via 0000:00: 0f.0: version 1.1 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 17 sata_via 0000:00:0f.0: routed to hard irq line 5 ata1: SATA max UDMA/133 cmd 0xD000 ctl 0xC802 bmdma 0xB800 irq 17 ata2: SATA max UDMA/133 cmd 0xC400 ctl 0xC002 bmdma 0xB808 irq 17 ata1: SATA link down (SStatus 0) scsi0 : sata_via ata2: SATA link up 1.5 Gbps (SStatus 113) input: ImPS/2 Generic Wheel Mouse as /class/input/input1 ata2: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:407f ata2: dev 0 ATA-7, max UDMA/133, 156301488 sectors: LBA48 ata2: dev 0 configured for UDMA/133 scsi1 : sata_via Vendor: ATA Model: WDC WD800JD-00LS Rev: 06.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 sda6 sda7 > sd 1:0:0:0: Attached scsi disk sda kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. ts: Compaq touchscreen protocol output usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 18 PCI: VIA IRQ fixup for 0000:00:10.0, from 11 to 2 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 18, io base 0x0000d400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 18 PCI: VIA IRQ fixup for 0000:00: 10.1, from 11 to 2 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 18, io base 0x0000d800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0 : 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 18 PCI: VIA IRQ fixup for 0000:00:10.2, from 5 to 2 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2 : new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 18, io base 0x0000e000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0 : 2 ports detected ACPI: PCI Interrupt 0000:00: 10.3[B] -> GSI 21 (level, low) -> IRQ 18 PCI: VIA IRQ fixup for 0000:00:10.3, from 5 to 2 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.3: irq 18, io base 0x0000e400 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00: 10.4[C] -> GSI 21 (level, low) -> IRQ 18 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:10.4: irq 18, io mem 0xfae00000 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 , driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected AGP bridge 0 agpgart: AGP aperture is 256M @ 0xc0000000 device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@xxxxxxxxxx EXT3 FS on sda7, internal journal Adding 1228932k swap on /dev/sda6. Priority:-1 extents:1 across:1228932k Supermount version 2.0.4 for kernel 2.6 NTFS driver 2.1.27 [Flags: R/O DEBUG MODULE]. NTFS volume version 3.1. NTFS volume version 3.1. loop: loaded (max 8 devices, max 1 partitions per device) hda: ATAPI 48X DVD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Sleep Button (CM) [SLPB] Using specific hotkey driver Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 end_request: I/O error, dev fd0, sector 0 ACPI: PCI Interrupt 0000:00: 11.5[C] -> GSI 22 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:11.5 to 64 NET: Registered protocol family 17 ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 20 skge 1.5 addr 0xfac00000 irq 20 chip Yukon-Lite rev 9 skge eth0: addr 00:15:f2:18:7b:d9 skge eth0: enabling interface NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6 over IPv4 tunneling driver hsfengine: module license 'see LICENSE file distributed with driver' taints kernel. PCI: Enabling device 0000:00: 11.6 (0000 -> 0001) ACPI: PCI Interrupt 0000:00: 11.6[C] -> GSI 22 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:11.6 to 64 cnxthsf_cnxt_serial_add: ComCtrlOpen failed (1) ACPI: PCI interrupt for device 0000:00: 11.6 disabled hsfvia: probe of 0000:00: 11.6 failed with error -5 usbcore: registered new driver hsfusbcd2 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21 NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9746 Fri Dec 15 09:54:45 PST 2006 agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode slamr: SmartLink AMRMO modem. slamr: probe 2000:2800 SL2800 card... ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 18 (level, low) -> IRQ 16 slamr: slamr0 is SL2800 card. slamr: probe 1106:3068 VIA3058 card... ACPI: PCI Interrupt 0000:00: 11.6[C] -> GSI 22 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:11.6 to 64 slamr: mc97 codec is ALG90 slamr: cannot init card. ACPI: PCI interrupt for device 0000:00: 11.6 disabled ACPI: PCI interrupt for device 0000:00:0d.0 disabled bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 12533 bytes, v3). bootsplash: status on console 0 changed to on bootsplash 3.1.6-2004 /03/31: looking for picture...<6>...found (800x600, 12533 bytes, v3). bootsplash: status on console 1 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 12533 bytes, v3). bootsplash: status on console 2 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 12533 bytes, v3). bootsplash: status on console 3 changed to on bootsplash 3.1.6-2004 /03/31: looking for picture...<6>...found (800x600, 12533 bytes, v3). bootsplash: status on console 4 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 12533 bytes, v3). bootsplash: status on console 5 changed to on usb 5-8: new high speed USB device using ehci_hcd and address 2 usb 5-8: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi2 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage USB Mass Storage support registered. usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning Vendor: Model: USB DISK Rev: 1100 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sdb: 252928 512-byte hdwr sectors (129 MB) sdb: Write Protect is off sdb: Mode Sense: 43 00 00 00 sdb: assuming drive cache: write through SCSI device sdb: 252928 512-byte hdwr sectors (129 MB) sdb: Write Protect is off sdb: Mode Sense: 43 00 00 00 sdb: assuming drive cache: write through sdb: sdb1 sd 2:0:0:0: Attached scsi disk sdb usb-storage: device scan complete sd 1:0:0:0: Attached scsi generic sg0 type 0 sd 2:0:0:0: Attached scsi generic sg1 type 0 ModemData.txt Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List Server. Do use the following as the email Subject Line: SomeName, YourCountry Mandriva Linux release 2007.0 (Official) for i586 Kernel 2.6.17-10mdv on an i686 / kernel 2.6.17-10mdv This will alert cogent experts, and distinguish cases in the Archives. YourCountry will enable Country Code guidance. Occassionally responses are blocked by an Internet Provider mail filters. So in a day, also check the Archived responses at http://www.linmodems.org . Local Linux experts can be found through: http://www.linux.org/groups/index.html -------------------------- System information ---------------------------- CPU=i686, Mandriva Linux release 2007.0 (Official) for i586 Kernel 2.6.17-10mdv on an i686 / Linux version 2.6.17-10mdv ( rtp@xxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20070115 (prerelease) (4.1.2-0.20070115.1mdv2007.1 )) #1 SMP Mon Feb 12 11:16:06 EST 2007 scanModem update of: 2007_Feb_21 The modem symbolic link is /dev/modem -> ttySHSF0 USB modem not detected by lsusb Modem or host audio card candidates have firmware information: PCI slot PCI ID SubsystemID Name ---------- --------- --------- -------------- 00:0d.0 2000:2800 163c:2800 Modem: Smart Link Ltd. Unknown device 2800 Modem interrupt assignment and sharing: --- Bootup diagnositcs for card in PCI slot 00:0d.0 ---- ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 18 (level, low) -> IRQ 16 ACPI: PCI interrupt for device 0000:00:0d.0 disabled ACPI: PCI Interrupt 0000:00: 0d.0[A] -> GSI 18 (level, low) -> IRQ 16 ACPI: PCI interrupt for device 0000:00:0d.0 disabled The PCI slot 00:0d.0 of the modem card may be disabled early in a bootup process, but then enabled later. If modem drivers load but the modem is not responsive, read Bootup.txt about possible fixes. Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx if help is needed. PCI slot PCI ID SubsystemID Name ---------- --------- --------- -------------- 00:11.6 1106:3068 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller Modem interrupt assignment and sharing: 19: 785 IO-APIC-level VIA8237 --- Bootup diagnositcs for card in PCI slot 00: 11.6 ---- PCI: Enabling device 0000:00:11.6 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00: 11.6 to 64 ACPI: PCI interrupt for device 0000:00:11.6 disabled hsfvia: probe of 0000:00:11.6 failed with error -5 ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00: 11.6 to 64 ACPI: PCI interrupt for device 0000:00:11.6 disabled The PCI slot 00:11.6 of the modem card may be disabled early in a bootup process, but then enabled later. If modem drivers load but the modem is not responsive, read Bootup.txt about possible fixes. Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx if help is needed. === Finished modem firmware and bootup diagnostics section. === === Next deducing cogent software === PCIbus=00:11.6 00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80) Flags: medium devsel, IRQ 19 I/O ports at 1000 [size=256] Capabilities: [d0] Power Management version 2 ALSAversion 1.0.12 The audio card is not a modem hosting type. My Installation Steps 1 - Using o scanModem 2 - Download de slmodem-2.9.11-20070204.tar.gz 3 - tar -zxvf slmodem-2.9.11-20070204.tar.gz 4 - cd slmodem-2.9.11-20070204 5 - make output: make -C modem all make[1]: Entrando no diretório `/home/david/Documentos/Utilitários/drivers/modem/slmodem-2.9.11-20070204/modem' rebuild profile... gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_main.o -c modem_main.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_cmdline.o -c modem_cmdline.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem.o -c modem.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_datafile.o -c modem_datafile.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_at.o -c modem_at.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_timer.o -c modem_timer.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_pack.o -c modem_pack.c modem_pack.c: In function 'modem_async_get_bits': modem_pack.c:100: warning: pointer targets in passing argument 2 of 'm->get_chars' differ in signedness modem_pack.c: In function 'modem_async_put_bits': modem_pack.c:148: warning: pointer targets in passing argument 2 of 'm->put_chars' differ in signedness gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_ec.o -c modem_ec.c modem_ec.c: In function 'tx_info': modem_ec.c:723: warning: pointer targets in passing argument 2 of 'l->modem->get_chars' differ in signedness modem_ec.c: In function 'push_rest_data': modem_ec.c:811: warning: pointer targets in passing argument 2 of 'l->modem->put_chars' differ in signedness modem_ec.c: In function 'rx_info': modem_ec.c:860: warning: pointer targets in passing argument 2 of 'l->modem->put_chars' differ in signedness gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_comp.o -c modem_comp.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_param.o -c modem_param.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_debug.o -c modem_debug.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o homolog_data.o -c homolog_data.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_sinus.o -c dp_sinus.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_dummy.o -c dp_dummy.c gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o sysdep_common.o -c sysdep_common.c gcc -o slmodemd modem_main.o modem_cmdline.o modem.o modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o modem_param.o modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o dsplibs.o sysdep_common.o gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_test.o -c modem_test.c gcc -o modem_test modem_test.o modem_cmdline.o modem.o modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o modem_param.o modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o dsplibs.o sysdep_common.o make[1]: Saindo do diretório `/home/david/Documentos/Utilitários/drivers/modem/slmodem-2.9.11-20070204/modem' make -C drivers KERNEL_DIR=/lib/modules/2.6.17-10mdv/build make[1]: Entrando no diretório `/home/david/Documentos/Utilitários/drivers/modem/slmodem- 2.9.11-20070204/drivers' cc -I/lib/modules/2.6.17-10mdv/build/include -o kernel-ver kernel-ver.c make all KERNEL_VER=2.6.17-10mdv make[2]: Entrando no diretório `/home/david/Documentos/Utilitários/drivers/modem/slmodem- 2.9.11-20070204/drivers' make modules -C /lib/modules/2.6.17-10mdv/build SUBDIRS=/home/david/Documentos/Utilitários/drivers/modem/slmodem-2.9.11-20070204/drivers make[3]: Entrando no diretório `/usr/src/linux-2.6.17-10mdv ' CC [M] /home/david/Documentos/Utilitários/drivers/modem/slmodem-2.9.11-20070204/drivers/amrmo_init.o CC [M] /home/david/Documentos/Utilitários/drivers/modem/slmodem-2.9.11-20070204/drivers/sysdep_amr.o CC [M] /home/david/Documentos/Utilitários/drivers/modem/slmodem-2.9.11-20070204/drivers/st7554.o LD [M] /home/david/Documentos/Utilitários/drivers/modem/slmodem-2.9.11-20070204/drivers/slamr.o LD [M] /home/david/Documentos/Utilitários/drivers/modem/slmodem- 2.9.11-20070204/drivers/slusb.o Building modules, stage 2. MODPOST CC /home/david/Documentos/Utilitários/drivers/modem/slmodem-2.9.11-20070204/drivers/slamr.mod.o LD [M] /home/david/Documentos/Utilitários/drivers/modem/slmodem- 2.9.11-20070204/drivers/slamr.ko CC /home/david/Documentos/Utilitários/drivers/modem/slmodem-2.9.11-20070204 /drivers/slusb.mod.o LD [M] /home/david/Documentos/Utilitários/drivers/modem/slmodem- 2.9.11-20070204 /drivers/slusb.ko make[3]: Saindo do diretório `/usr/src/linux-2.6.17-10mdv' make[2]: Saindo do diretório `/home/david/Documentos/Utilitários/drivers/modem/slmodem-2.9.11-20070204/drivers' make[1]: Saindo do diretório `/home/david/Documentos/Utilitários/drivers/modem/slmodem- 2.9.11-20070204/drivers' 6 - make install output: make -C modem all make[1]: Entrando no diretório `/home/david/Documentos/Utilitários/drivers/modem/slmodem-2.9.11-20070204/modem' make[1]: Saindo do diretório `/home/david/Documentos/Utilitários/drivers/modem/slmodem- 2.9.11-20070204/modem' make -C drivers KERNEL_DIR=/lib/modules/2.6.17-10mdv/build make[1]: Entrando no diretório `/home/david/Documentos/Utilitários/drivers/modem/slmodem-2.9.11-20070204/drivers' cc -I/lib/modules/2.6.17-10mdv/build/include -o kernel-ver kernel-ver.c make all KERNEL_VER=2.6.17-10mdv make[2]: Entrando no diretório `/home/david/Documentos/Utilitários/drivers/modem/slmodem-2.9.11-20070204/drivers' make modules -C /lib/modules/2.6.17-10mdv/build SUBDIRS=/home/david/Documentos/Utilitários/drivers/modem/slmodem- 2.9.11-20070204/drivers make[3]: Entrando no diretório `/usr/src/linux-2.6.17-10mdv' Building modules, stage 2. MODPOST make[3]: Saindo do diretório `/usr/src/linux-2.6.17-10mdv' make[2]: Saindo do diretório `/home/david/Documentos/Utilitários/drivers/modem/slmodem- 2.9.11-20070204/drivers' make[1]: Saindo do diretório `/home/david/Documentos/Utilitários/drivers/modem/slmodem-2.9.11-20070204/drivers' make install -C drivers KERNEL_DIR=/lib/modules/2.6.17-10mdv/build make[1]: Entrando no diretório `/home/david/Documentos/Utilitários/drivers/modem/slmodem-2.9.11-20070204/drivers' cc -I/lib/modules/2.6.17-10mdv /build/include -o kernel-ver kernel-ver.c mkdir -p /dev mknod -m 600 /dev/slamr0 c 242 0 ; mknod -m 600 /dev/slamr1 c 242 1 ; mknod -m 600 /dev/slamr2 c 242 2 ; mknod -m 600 /dev/slamr3 c 242 3 ; echo -n mknod -m 600 /dev/slusb0 c 243 0 ; mknod -m 600 /dev/slusb1 c 243 1 ; mknod -m 600 /dev/slusb2 c 243 2 ; mknod -m 600 /dev/slusb3 c 243 3 ; echo -n make install KERNEL_VER=2.6.17-10mdv make[2]: Entrando no diretório `/home/david/Documentos/Utilitários/drivers/modem/slmodem- 2.9.11-20070204/drivers' install -D -m 644 slamr.ko /lib/modules/2.6.17-10mdv/extra/slamr.ko install -D -m 644 slusb.ko /lib/modules/2.6.17-10mdv/extra/slusb.ko /sbin/depmod -a make[2]: Saindo do diretório `/home/david/Documentos/Utilitários/drivers/modem/slmodem- 2.9.11-20070204/drivers' make[1]: Saindo do diretório `/home/david/Documentos/Utilitários/drivers/modem/slmodem- 2.9.11-20070204/drivers' install -D -m 755 modem/slmodemd /usr/sbin/slmodemd rm -f -rf /var/lib/slmodem install -d -D -m 755 /var/lib/slmodem 7 - modprobe slamr output: FATAL: Error inserting slamr (/lib/modules/2.6.17-10mdv/extra/slamr.ko): Cannot allocate memory
