Cynbad, Functionality for CALLER ID has generally not been implemented inLinux modem drivers. If would require changes in the code sectionthat is pre-compiled at the chipset maker/designer. They make noprofit from Linux code, and we are lucky to have bare dialoutfunctionality. In the case of your AC'97 compatibility AgereSystems softmodem chip,it is ALSA modem drivers + slmodemd of SmartLink Inc. originproviding the software support. Improvements in the pre-compiledcomponent of slmodemd cannot be expected, because the distributionrights have been purchased by Conexant Inc. The diagnostics on your System look fine for primary dialout access. MarvS On 2/17/07, Cynbad <cynbad110@xxxxxxxxx> wrote:> Summary: installed SLMODEMD.gcc4, modem can dial, but no receiving rings or CID>> Hi all,>> I've been working on getting this agere '97 modem working for two full> days now. I only just realized that the modem works for dialing out> (haven't tried actually connecting to an ISP) but when I set up> minicom to display caller ID info it just sits there like nothing is> happening when the phone rings. I tried NCID too (the only reason for> wanting modem support) but it too just sits there like it can't detect> the ring.> The modem does support caller ID.. in windows' hyperterminal it> displays my full name and phone number when I call from my cell. I'm> using ALSA drivers, but I've tried the slamr one too>> Can anyone help me out before I go and buy an external modem?>> Thank you!>> This is my ModemData.txt:> -------------------------- System information ----------------------------> CPU=i686, Ubuntu 6.10> Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2> 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13> 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)> scanModem update of: 2007_Feb_10>>> USB modem not detected by lsusb>> Modem or host audio card candidates have firmware information:>> PCI slot PCI ID SubsystemID Name> ---------- --------- --------- --------------> 00:06.1 10de:00d9 103c:006d Modem: nVidia Corporation nForce3 Audio>> Modem interrupt assignment and sharing:> 193: 8713 IO-APIC-level ohci_hcd:usb3, NVidia nForce3 Modem>> --- Bootup diagnositcs for card in PCI slot 00:06.1 ----> [17179573.660000] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LMCI]> -> GSI 22 (level, low) -> IRQ 193> [17179573.660000] ACPI: PCI interrupt for device 0000:00:06.1 disabled> [17180132.476000] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LMCI]> -> GSI 22 (level, low) -> IRQ 193> [17180132.476000] PCI: Setting latency timer of device 0000:00: 06.1 to 64>> The PCI slot 00:06.1 of the modem card may be disabled early in> a bootup process, but then enabled later. If modem drivers load> but the modem is not responsive, read Bootup.txt about possible fixes.> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx> if help is needed.>>> === Finished modem firmware and bootup diagnostics section. ===> === Next deducing cogent software ===>> ALSAversion 1.0.11> For candidate modem in PCI bus: 00:06.1> Class 0703: 10de:00d9 Modem: nVidia Corporation nForce3 Audio> Primary PCI_id 10de:00d9> Subsystem PCI_id 103c:006d> Softmodem codec or Vendor from diagnostics: SIL27, an AgereSystems type.> from Archives: SIL27, an AgereSystems type.>>> Lacking a dsp (digital signal processing) chip, the modem is a software> intensive or "softmodem" type. Its primary controller manages the traffic> with the CPU. But the software needed is specified in the Subsystem.> -----------------------------------------> Support type needed or chipset: slmodemd>> An ALSA (Advanced Linux Sound Architecture) modem driver: snd-intel8x0m> provides Low Level support enabling contact with the modem hardware.> For all BUT Conexant chip soft modems (using hsfmodem software)> complementary High Level support is through a Smartlink utility: slmodemd>> Download from http://linmodems.technion.ac.il/packages/smartlink/> the package SLMODEMD.gcc4.tar.gz having a compiled slmodemd. Unpack> under Linux with:> $ tar zxf SLMODEMD.gcc4.tar.gz> and read instructions therein. But briefly, the modem is setup with command:> sudo slmodemd -c YOUR_COUNTRY --alsa modem:1> reporting dynamic creation of ports:> /dev/ttySL0 --> /dev/pts/N , with N some number> Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.>> Already loaded into the kernel is snd-intel8x0m and audio drivers it> depends on,> displayed by: lsmod | grep snd_intel8x0m> Module Size Used by> -------------------------------------> snd_intel8x0m 18956 0> snd_ac97_codec 97696 2 snd_intel8x0m,snd_intel8x0> snd_pcm 84612 4> snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss> snd 58372 9> snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer> snd_page_alloc 11400 3 snd_intel8x0m,snd_intel8x0,snd_pcm>>> The diagnostic outputs for this softmodem section have their raw information in> folders and text files under /proc/asound/ which you can browse. The information> is from files:> /proc/asound/pcm> -------------------------------> 00-02: Intel ICH - IEC958 : NVidia nForce3 - IEC958 : playback 1> 00-01: Intel ICH - MIC ADC : NVidia nForce3 - MIC ADC : capture 1> 00-00: Intel ICH : NVidia nForce3 : playback 1 : capture 1> 01-00: Intel ICH - Modem : NVidia nForce3 Modem - Modem : playback 1 : capture 1>> /proc/asound/modules> -------------------------------> 0 snd_intel8x0> 1 snd_intel8x0m> /proc/asound/card1/codec97#0/mc97#1-1+regs> -------------------------------> 0:7c = 5349 and 0:7e = 4c27> which were translated from hexadecimal code into: SIL27>> /proc/asound/card1/codec97#0/mc97#1-1> -------------------------------> Extended modem ID: codec=1 LIN1>> and from the command:> aplay -l | grep -i modem> card 1: Modem [NVidia nForce3 Modem], device 0: Intel ICH - Modem> [NVidia nForce3 Modem - Modem]>> ----------------end Softmodem section --------------> Writing Smartlink.txt> ============ end Smartlink section =====================>> Completed candidate modem analyses.>> The base of the UDEV device file system is: /dev/.udev>> Versions adequately match for the compiler installed: 4.1.2> and the compiler used in kernel assembly: 4.1.2>>>> Compiling resources appear complete:> make utility - /usr/bin/make> Compiler version 4.1> kernel_headers base folder /lib/modules/2.6.17-10-generic/build>>> Checking pppd properties:> -rwsr-xr-- 1 root dip 260920 2006-07-10 15:13 /usr/sbin/pppd>> In case of an "error 17" "serial loopback" problem, see:> http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html>> To enable dialout without Root permission do:> $ su - root (not for Ubuntu)> sudo chmod a+x /usr/sbin/pppd> or under Ubuntu related Linuxes> sudo chmod a+x /usr/sbin/pppd>> Checking settings of: /etc/ppp/options> asyncmap 0> auth> crtscts> lock> hide-password> modem> proxyarp> lcp-echo-interval 30> lcp-echo-failure 4> noipx>> In case of a message like:> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html>> Read Modem/YourSystem.txt concerning other COMM channels: eth0> Which can interfere with Browser naviagation.>> Don't worry about the following, it is for the experts> should trouble shooting be necessary.> ==========================================================>> Checking for modem support lines:> --------------------------------------> /device/modem symbolic link:> slmodemd created symbolic link /dev/ttySL0:> Within /etc/udev/ files:> /etc/udev/rules.d/60-symlinks.rules:# Create /dev/modem symlink> /etc/udev/rules.d/60-symlinks.rules:KERNEL=="ttyLTM[0-9]*",> SYMLINK+="modem"> Within /etc/modprobe.conf files:> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2> /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to> blacklist unwanted modem drivers> /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem> /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem> Within any ancient /etc/devfs files:>> Within ancient kernel 2.4.n /etc/module.conf files:>> --------- end modem support lines -------->> This is my dmesg output:> dmesg> [17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky)> (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5 )) #2> SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)> [17179569.184000] BIOS-provided physical RAM map:> [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)> [17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)> [17179569.184000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)> [17179569.184000] BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)> [17179569.184000] BIOS-e820: 000000003ff70000 - 000000003ff7f000 (ACPI data)> [17179569.184000] BIOS-e820: 000000003ff7f000 - 000000003ff80000 (ACPI NVS)> [17179569.184000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)> [17179569.184000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)> [17179569.184000] 127MB HIGHMEM available.> [17179569.184000] 896MB LOWMEM available.> [17179569.184000] On node 0 totalpages: 262000> [17179569.184000] DMA zone: 4096 pages, LIFO batch:0> [17179569.184000] Normal zone: 225280 pages, LIFO batch:31> [17179569.184000] HighMem zone: 32624 pages, LIFO batch:7> [17179569.184000] DMI present.> [17179569.184000] ACPI: RSDP (v000 PTLTD> ) @ 0x000f7240> [17179569.184000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP> 0x00000000) @ 0x3ff7a87e> [17179569.184000] ACPI: FADT (v001 NVIDIA CK8 0x06040000 PTL_> 0x000f4240) @ 0x3ff7ee13> [17179569.184000] ACPI: MADT (v001 NVIDIA NV_APIC_ 0x06040000 LTP> 0x00000000) @ 0x3ff7ee87> [17179569.184000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP> 0x00000001) @ 0x3ff7eee1> [17179569.184000] ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP> 0x00000001) @ 0x3ff7ef09> [17179569.184000] ACPI: DSDT (v001 NVIDIA CK8 0x06040000 MSFT> 0x0100000e) @ 0x00000000> [17179569.184000] ACPI: PM-Timer IO Port: 0x8008> [17179569.184000] ACPI: Local APIC address 0xfee00000> [17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)> [17179569.184000] Processor #0 15:4 APIC version 16> [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])> [17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])> [17179569.184000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23> [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)> [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)> [17179569.184000] ACPI: BIOS IRQ0 pin2 override ignored.> [17179569.184000] ACPI: IRQ9 used by override.> [17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs> [17179569.184000] Using ACPI (MADT) for SMP configuration information> [17179569.184000] Allocating PCI resources starting at 50000000 (gap:> 40000000:bff80000)> [17179569.184000] Built 1 zonelists> [17179569.184000 ] Kernel command line: root=/dev/hda8 ro quiet splash> [17179569.184000] mapped APIC to ffffd000 (fee00000)> [17179569.184000] mapped IOAPIC to ffffc000 (fec00000)> [17179569.184000] Enabling fast FPU save and restore... done.> [17179569.184000] Enabling unmasked SIMD FPU exception support... done.> [17179569.184000] Initializing CPU#0> [17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)> [17179569.184000] Detected 2194.570 MHz processor.> [17179569.184000] Using pmtmr for high-res timesource> [17179569.184000] Console: colour VGA+ 80x25> [17179571.796000] Dentry cache hash table entries: 131072 (order: 7,> 524288 bytes)> [17179571.796000 ] Inode-cache hash table entries: 65536 (order: 6,> 262144 bytes)> [17179571.816000] Memory: 1028876k/1048000k available (1910k kernel> code, 18396k reserved, 1070k data, 308k init, 130496k highmem)> [17179571.816000] Checking if this processor honours the WP bit even> in supervisor mode... Ok.> [17179571.896000] Calibrating delay using timer specific routine..> 4393.63 BogoMIPS (lpj=8787262)> [17179571.896000] Security Framework v1.0.0 initialized> [17179571.896000] SELinux: Disabled at boot.> [17179571.896000 ] Mount-cache hash table entries: 512> [17179571.896000] CPU: After generic identify, caps: 078bfbff e1d3fbff> 00000000 00000000 00000000 00000000 00000000> [17179571.896000] CPU: After vendor identify, caps: 078bfbff e1d3fbff> 00000000 00000000 00000000 00000000 00000000> [17179571.896000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K> (64 bytes/line)> [17179571.896000] CPU: L2 Cache: 1024K (64 bytes/line)> [17179571.896000] CPU: After all inits, caps: 078bfbff e1d3fbff> 00000000 00000410 00000000 00000000 00000000> [17179571.896000] Checking 'hlt' instruction... OK.> [17179571.912000] SMP alternatives: switching to UP code> [17179571.912000] Freeing SMP alternatives: 16k freed> [17179571.912000] checking if image is initramfs... it is> [17179572.332000] Freeing initrd memory: 5626k freed> [17179572.332000] ACPI: Core revision 20060707> [17179572.332000] ACPI: Looking for DSDT ... not found!> [17179572.352000] CPU0: AMD Athlon(tm) 64 Processor 3400+ stepping 0a> [17179572.352000] Total of 1 processors activated (4393.63 BogoMIPS).> [17179572.352000] ENABLING IO-APIC IRQs> [17179572.352000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1> [17179572.500000] Brought up 1 CPUs> [17179572.500000] migration_cost=0> [17179572.500000] NET: Registered protocol family 16> [17179572.500000] EISA bus registered> [17179572.500000] ACPI: bus type pci registered> [17179572.500000] PCI: PCI BIOS revision 2.10 entry at 0xfd8bc, last bus=2> [17179572.500000] PCI: Using configuration type 1> [17179572.500000] Setting up standard PCI resources> [17179572.500000] ACPI: Interpreter enabled> [17179572.500000] ACPI: Using IOAPIC for interrupt routing> [17179572.500000] ACPI: PCI Root Bridge [PCI0] (0000:00)> [17179572.500000] PCI: Probing PCI hardware (bus 00)> [17179572.528000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:08.0> [17179572.528000] PCI: Bus #03 (-#06) is hidden behind bridge #02> (-#02) (try 'pci=assign-busses')> [17179572.528000] Please report the result to linux-kernel to fix this> permanently> [17179572.528000] PCI: Bus #07 (-#0a) is hidden behind bridge #02> (-#02) (try 'pci=assign-busses')> [17179572.528000] Please report the result to linux-kernel to fix this> permanently> [17179572.528000] Boot video device is 0000:01:00.0> [17179572.528000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]> [17179572.536000] ACPI: Embedded Controller [EC0] (gpe 33) interrupt mode.> [17179572.580000 ] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]> [17179572.580000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT]> [17179572.580000] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 18 19) *0> [17179572.580000 ] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 18 19) *0> [17179572.580000] ACPI: PCI Interrupt Link [LNK3] (IRQs 17) *0> [17179572.580000] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 18 19) *0, disabled.> [17179572.580000 ] ACPI: PCI Interrupt Link [LNK5] (IRQs 16 18 19) *0> [17179572.580000] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22) *0> [17179572.580000] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *0> [17179572.584000] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0> [17179572.584000] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *0> [17179572.584000] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22) *0, disabled.> [17179572.584000] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22) *0> [17179572.584000] ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22) *0> [17179572.584000] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22) *0, disabled.> [17179572.584000] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0, disabled.> [17179572.584000] Linux Plug and Play Support v0.97 (c) Adam Belay> [17179572.584000] pnp: PnP ACPI init> [17179572.604000] pnp: PnP ACPI: found 12 devices> [17179572.604000] PnPBIOS: Disabled by ACPI PNP> [17179572.604000 ] PCI: Using ACPI for IRQ routing> [17179572.604000] PCI: If a device doesn't work, try "pci=routeirq".> If it helps, post a report> [17179572.608000] pnp: 00:01: ioport range 0x8000-0x807f could not be reserved> [17179572.608000] pnp: 00:01: ioport range 0x8080-0x80ff has been reserved> [17179572.608000] pnp: 00:01: ioport range 0x8400-0x847f has been reserved> [17179572.608000] pnp: 00:01: ioport range 0x8480-0x84ff could not be reserved> [17179572.608000] pnp: 00:01: ioport range 0x8800-0x887f has been reserved> [17179572.608000] pnp: 00:01: ioport range 0x8880-0x88ff has been reserved> [17179572.608000] pnp: 00:01: ioport range 0x2040-0x207f has been reserved> [17179572.608000] pnp: 00:01: ioport range 0x2000-0x203f has been reserved> [17179572.608000] PCI: Failed to allocate mem resource> #10:2000000@e2000000 for 0000:02:04.0> [17179572.608000] PCI: Failed to allocate mem resource #10:> 2000000@e2000000 for 0000:02:04.1> [17179572.608000] PCI: Bus 3, cardbus bridge: 0000:02:04.0> [17179572.608000] IO window: 00003000-000030ff> [17179572.608000] IO window: 00003400-000034ff> [17179572.608000] PREFETCH window: 50000000-51ffffff> [17179572.608000] PCI: Bus 7, cardbus bridge: 0000:02:04.1> [17179572.608000] IO window: 00003800-000038ff> [17179572.608000] IO window: 00003c00-00003cff> [17179572.608000] PREFETCH window: 52000000-53ffffff> [17179572.608000] PCI: Bridge: 0000:00:0a.0> [17179572.608000] IO window: 3000-7fff> [17179572.608000] MEM window: e0100000-e17fffff> [17179572.608000] PREFETCH window: 50000000-53ffffff> [17179572.608000 ] PCI: Bridge: 0000:00:0b.0> [17179572.608000] IO window: disabled.> [17179572.608000] MEM window: e2000000-e2ffffff> [17179572.608000] PREFETCH window: f0000000-f80fffff> [17179572.608000] PCI: Setting latency timer of device 0000:00: 0a.0 to 64> [17179572.608000] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 19> [17179572.608000] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNK1]> -> GSI 19 (level, low) -> IRQ 177> [17179572.608000] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 18> [17179572.608000] ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNK2]> -> GSI 18 (level, low) -> IRQ 185> [17179572.608000] NET: Registered protocol family 2> [17179572.648000] IP route cache hash table entries: 32768 (order: 5,> 131072 bytes)> [17179572.648000] TCP established hash table entries: 131072 (order:> 8, 1048576 bytes)> [17179572.648000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)> [17179572.648000] TCP: Hash tables configured (established 131072 bind 65536)> [17179572.648000] TCP reno registered> [17179572.648000] Simple Boot Flag at 0x37 set to 0x1> [17179572.648000] audit: initializing netlink socket (disabled)> [17179572.648000] audit(1171726582.648:1): initialized> [17179572.648000] highmem bounce pool size: 64 pages> [17179572.648000] VFS: Disk quotas dquot_6.5.1> [17179572.648000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)> [17179572.648000] Initializing Cryptographic API> [17179572.648000] io scheduler noop registered> [17179572.648000] io scheduler anticipatory registered> [17179572.648000] io scheduler deadline registered> [17179572.648000] io scheduler cfq registered (default)> [17179572.648000] isapnp: Scanning for PnP cards...> [17179573.004000] isapnp: No Plug & Play device found> [17179573.020000] Real Time Clock Driver v1.12ac> [17179573.020000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports,> IRQ sharing enabled> [17179573.020000] ACPI: PCI Interrupt Link [LMCI] enabled at IRQ 22> [17179573.020000] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LMCI]> -> GSI 22 (level, low) -> IRQ 193> [17179573.020000] ACPI: PCI interrupt for device 0000:00:06.1 disabled> [17179573.020000] mice: PS/2 mouse device common for all mice> [17179573.020000] RAMDISK driver initialized: 16 RAM disks of 65536K> size 1024 blocksize> [17179573.020000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2> [17179573.020000] ide: Assuming 33MHz system bus speed for PIO modes;> override with idebus=xx> [17179573.020000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at> 0x60,0x64 irq 1,12> [17179573.028000] i8042.c: Detected active multiplexing controller, rev 1.1.> [17179573.032000] serio: i8042 AUX0 port at 0x60,0x64 irq 12> [17179573.032000] serio: i8042 AUX1 port at 0x60,0x64 irq 12> [17179573.036000 ] serio: i8042 AUX2 port at 0x60,0x64 irq 12> [17179573.036000] serio: i8042 AUX3 port at 0x60,0x64 irq 12> [17179573.036000] serio: i8042 KBD port at 0x60,0x64 irq 1> [17179573.040000] EISA: Probing bus 0 at eisa.0> [17179573.040000] Cannot allocate resource for EISA slot 1> [17179573.040000] Cannot allocate resource for EISA slot 2> [17179573.040000] Cannot allocate resource for EISA slot 3> [17179573.040000] Cannot allocate resource for EISA slot 4> [17179573.040000] Cannot allocate resource for EISA slot 5> [17179573.040000] Cannot allocate resource for EISA slot 6> [17179573.040000] Cannot allocate resource for EISA slot 7> [17179573.040000] Cannot allocate resource for EISA slot 8> [17179573.040000] EISA: Detected 0 cards.> [17179573.040000] TCP bic registered> [17179573.040000] NET: Registered protocol family 1> [17179573.040000] NET: Registered protocol family 8> [17179573.040000] NET: Registered protocol family 20> [17179573.040000] Using IPI No-Shortcut mode> [17179573.040000] ACPI: (supports S0 S3 S4 S5)> [17179573.040000] Freeing unused kernel memory: 308k freed> [17179573.080000] input: AT Translated Set 2 keyboard as /class/input/input0> [17179574.172000] Capability LSM initialized> [17179574.200000] ACPI: CPU0 (power states: C1[C1] C2[C2])> [17179574.208000] ACPI Exception (acpi_thermal-0417): AE_NOT_FOUND,> Invalid active threshold [0] [20060707]> [17179574.212000] ACPI: Thermal Zone [THRM] (41 C)> [17179574.548000] SCSI subsystem initialized> [17179574.548000] libata version 1.20 loaded.> [17179574.552000] NFORCE3-150: IDE controller at PCI slot 0000:00: 08.0> [17179574.552000] NFORCE3-150: chipset revision 165> [17179574.552000] NFORCE3-150: not 100% native mode: will probe irqs later> [17179574.552000] NFORCE3-150: BIOS didn't set cable bits correctly.> Enabling workaround.> [17179574.552000] NFORCE3-150: 0000:00:08.0 (rev a5) UDMA133 controller> [17179574.552000] ide0: BM-DMA at 0x2080-0x2087, BIOS settings:> hda:DMA, hdb:pio> [17179574.552000] ide1: BM-DMA at 0x2088-0x208f, BIOS settings:> hdc:DMA, hdd:pio> [17179574.552000] Probing IDE interface ide0...> [17179574.840000] hda: FUJITSU MHU2100AT, ATA DISK drive> [17179575.516000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14> [17179575.548000] Probing IDE interface ide1...> [17179576.288000] hdc: _NEC DVD+/-RW ND-6500A, ATAPI CD/DVD-ROM drive> [17179576.976000] ide1 at 0x170-0x177,0x376 on irq 15> [17179576.984000] hda: max request size: 128KiB> [17179576.992000] hda: 195371568 sectors (100030 MB) w/8192KiB Cache,> CHS=65535/16/63, UDMA(100)> [17179576.992000] hda: cache flushes supported> [17179576.992000] hda: hda1 hda2 < hda5 hda6 hda7 hda8 > hda3> [17179577.084000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, DMA> [17179577.084000 ] Uniform CD-ROM driver Revision: 3.20> [17179577.532000] usbcore: registered new driver usbfs> [17179577.532000] usbcore: registered new driver hub> [17179577.532000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host> Controller (OHCI) Driver (PCI)> [17179577.532000] PCI: Enabling device 0000:00:02.0 (0004 -> 0006)> [17179577.532000] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21> [17179577.532000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0]> -> GSI 21 (level, low) -> IRQ 201> [17179577.532000] PCI: Setting latency timer of device 0000:00:02.0 to 64> [17179577.532000] ohci_hcd 0000:00:02.0: OHCI Host Controller> [17179577.532000] ohci_hcd 0000:00:02.0: new USB bus registered,> assigned bus number 1> [17179577.768000] ohci_hcd 0000:00:02.0: irq 201, io mem 0xe0000000> [17179577.788000] ieee1394: Initialized config rom entry `ip1394'> [17179577.824000] usb usb1: configuration #1 chosen from 1 choice> [17179577.824000 ] hub 1-0:1.0: USB hub found> [17179577.824000] hub 1-0:1.0: 3 ports detected> [17179577.928000] PCI: Enabling device 0000:00:02.1 (0004 -> 0006)> [17179577.928000] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 20> [17179577.928000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1]> -> GSI 20 (level, low) -> IRQ 209> [17179577.928000] PCI: Setting latency timer of device 0000:00:02.1 to 64> [17179577.928000] ohci_hcd 0000:00: 02.1: OHCI Host Controller> [17179577.928000] ohci_hcd 0000:00:02.1: new USB bus registered,> assigned bus number 2> [17179578.128000] ohci_hcd 0000:00:02.1: irq 209, io mem 0xe0001000> [17179578.184000] usb usb2: configuration #1 chosen from 1 choice> [17179578.184000] hub 2-0:1.0: USB hub found> [17179578.184000] hub 2-0:1.0: 3 ports detected> [17179578.288000] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22> [17179578.288000] ACPI: PCI Interrupt 0000:00:02.2 [C] -> Link [LUS2]> -> GSI 22 (level, low) -> IRQ 193> [17179578.288000] PCI: Setting latency timer of device 0000:00:02.2 to 64> [17179578.288000] ehci_hcd 0000:00:02.2: EHCI Host Controller> [17179578.288000 ] ehci_hcd 0000:00:02.2: new USB bus registered,> assigned bus number 3> [17179578.288000] PCI: cache line size of 64 is not supported by> device 0000:00:02.2> [17179578.288000] ehci_hcd 0000:00:02.2: irq 193, io mem 0xe0004000> [17179578.288000] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00,> driver 10 Dec 2004> [17179578.288000] usb usb3: configuration #1 chosen from 1 choice> [17179578.288000] hub 3-0:1.0: USB hub found> [17179578.288000 ] hub 3-0:1.0: 6 ports detected> [17179578.400000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNK1]> -> GSI 19 (level, low) -> IRQ 177> [17179578.448000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177]> MMIO=[e0108000-e01087ff] Max Packet=[2048] IR/IT contexts=[4/8]> [17179578.508000] Attempting manual resume> [17179578.536000] kjournald starting. Commit interval 5 seconds> [17179578.536000] EXT3-fs: mounted filesystem with ordered data mode.> [17179578.664000] ohci_hcd 0000:00: 02.1: wakeup> [17179579.048000] usb 2-1: new low speed USB device using ohci_hcd and address 2> [17179579.268000] usb 2-1: configuration #1 chosen from 1 choice> [17179579.720000] ieee1394: Host added: ID:BUS[0-00:1023]> GUID[523f0200523f0200]> [17179588.588000] Linux agpgart interface v0.101 (c) Dave Jones> [17179588.588000] agpgart: Detected AGP bridge 0> [17179588.588000] agpgart: Setting up Nforce3 AGP.> [17179588.628000] agpgart: AGP aperture is 128M @ 0xe8000000> [17179588.632000] input: PC Speaker as /class/input/input1> [17179589.044000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5> [17179589.080000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4> [17179589.440000 ] parport: PnPBIOS parport detected.> [17179589.440000] parport0: PC-style at 0x378 (0x778), irq 7, dma 1> [PCSPP,TRISTATE,COMPAT,ECP,DMA]> [17179589.456000] input: PS/2 Mouse as /class/input/input2> [17179589.464000 ] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x2040> [17179589.464000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2000> [17179589.480000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3> [17179589.644000] ts: Compaq touchscreen protocol output> [17179589.692000] ieee80211_crypt: registered algorithm 'NULL'> [17179589.708000] ieee80211: 802.11 data/management/control stack, git-1.1.13> [17179589.708000] ieee80211: Copyright (C) 2004-2005 Intel Corporation> < jketreno@xxxxxxxxxxxxxxx>> [17179589.728000] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNK1]> -> GSI 19 (level, low) -> IRQ 177> [17179589.728000] Yenta: CardBus bridge found at 0000:02: 04.0 [103c:006d]> [17179589.728000] PCI: Bus 3, cardbus bridge: 0000:02:04.0> [17179589.728000] IO window: 00003000-000030ff> [17179589.728000] IO window: 00003400-000034ff> [17179589.728000] PREFETCH window: 50000000-51ffffff> [17179589.728000] MEM window: e0400000-e07fffff> [17179589.728000] Yenta: Enabling burst memory read transactions> [17179589.728000] Yenta: Using CSCINT to route CSC interrupts to PCI> [17179589.728000] Yenta: Routing CardBus interrupts to PCI> [17179589.728000] Yenta TI: socket 0000:02:04.0, mfunc 0x01111d22, devctl 0x64> [17179589.808000] usbcore: registered new driver hiddev> [17179589.844000] input: Microsoft Microsoft Wireless Optical Desktop�> 2.10 as /class/input/input4> [17179589.844000] input: USB HID v1.11 Keyboard [Microsoft Microsoft> Wireless Optical Desktop� 2.10] on usb-0000:00:02.1-1> [17179589.864000] 8139too Fast Ethernet driver 0.9.27> [17179589.904000] input: Microsoft Microsoft Wireless Optical Desktop�> 2.10 as /class/input/input5> [17179589.904000] input: USB HID v1.11 Mouse [Microsoft Microsoft> Wireless Optical Desktop� 2.10] on usb-0000:00:02.1-1> [17179589.904000] usbcore: registered new driver usbhid> [17179589.904000 ] drivers/usb/input/hid-core.c: v2.6:USB HID core driver> [17179589.960000] Yenta: ISA IRQ mask 0x0c38, PCI irq 177> [17179589.960000] Socket status: 30000086> [17179589.960000] Yenta: Raising subordinate bus# of parent bus (#02)> from #02 to #06> [17179589.960000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff> [17179589.960000] cs: IO port probe 0x3000-0x7fff: clean.> [17179589.960000] pcmcia: parent PCI bridge Memory window: 0xe0100000> - 0xe17fffff> [17179589.960000] pcmcia: parent PCI bridge Memory window: 0x50000000> - 0x53ffffff> [17179589.960000] ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNK2]> -> GSI 18 (level, low) -> IRQ 185> [17179589.960000 ] Yenta: CardBus bridge found at 0000:02:04.1 [103c:006d]> [17179589.960000] Yenta: Using CSCINT to route CSC interrupts to PCI> [17179589.960000] Yenta: Routing CardBus interrupts to PCI> [17179589.960000] Yenta TI: socket 0000:02: 04.1, mfunc 0x01111d22, devctl 0x64> [17179590.000000] bcm43xx driver> [17179590.192000] Yenta: ISA IRQ mask 0x0c38, PCI irq 185> [17179590.192000] Socket status: 30000006> [17179590.192000] Yenta: Raising subordinate bus# of parent bus (#02)> from #06 to #0a> [17179590.192000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff> [17179590.192000] cs: IO port probe 0x3000-0x7fff: clean.> [17179590.192000] pcmcia: parent PCI bridge Memory window: 0xe0100000> - 0xe17fffff> [17179590.192000] pcmcia: parent PCI bridge Memory window: 0x50000000> - 0x53ffffff> [17179590.196000] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 21> [17179590.196000] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI]> -> GSI 21 (level, low) -> IRQ 201> [17179590.196000] PCI: Setting latency timer of device 0000:00:06.0 to 64> [17179590.764000] intel8x0_measure_ac97_clock: measured 55462 usecs> [17179590.764000] intel8x0: clocking to 48000> [17179590.764000] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 17> [17179590.764000] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNK3]> -> GSI 17 (level, low) -> IRQ 217> [17179590.768000] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNK2]> -> GSI 18 (level, low) -> IRQ 185> [17179590.768000] eth1: RealTek RTL8139 at 0xf8a3e800,> 00:0f:b0:4a:13:06, IRQ 185> [17179590.768000] eth1: Identified 8139 chip type 'RTL-8101'> [17179590.792000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)> [17179590.800000] cs: IO port probe 0x100-0x3af: excluding 0x200-0x20f> [17179590.804000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7> [17179590.804000] cs: IO port probe 0x820-0x8ff: clean.> [17179590.804000 ] cs: IO port probe 0xc00-0xcf7: clean.> [17179590.804000] cs: IO port probe 0xa00-0xaff: clean.> [17179590.812000] cs: IO port probe 0x100-0x3af: excluding 0x200-0x20f> [17179590.812000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7> [17179590.812000] cs: IO port probe 0x820-0x8ff: clean.> [17179590.812000] cs: IO port probe 0xc00-0xcf7: clean.> [17179590.816000] cs: IO port probe 0xa00-0xaff: clean.> [17179590.904000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw"> not available or load failed.> [17179590.912000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw"> not available or load failed.> [17179590.912000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1> [17179591.940000] NET: Registered protocol family 17> [17179592.200000] floppy0: no floppy controllers found> [17179592.280000] lp0: using parport0 (interrupt-driven).> [17179592.308000] ieee1394: sbp2: Driver forced to serialize I/O> (serialize_io=1)> [17179592.308000 ] ieee1394: sbp2: Try serialize_io=0 for better performance> [17179592.332000] Adding 1052120k swap on> /dev/disk/by-uuid/2925ee15-1e64-4e9e-8bfb-6da5fcb662c9. Priority:-1> extents:1 across:1052120k> [17179592.480000] EXT3 FS on hda8, internal journal> [17179596.040000] NET: Registered protocol family 10> [17179596.040000] lo: Disabled Privacy Extensions> [17179596.040000] IPv6 over IPv4 tunneling driver> [17179597.672000] NTFS driver 2.1.27 [Flags: R/O MODULE].> [17179597.740000] NTFS volume version 3.1.> [17179597.888000] kjournald starting. Commit interval 5 seconds> [17179597.900000] EXT3 FS on hda5, internal journal> [17179597.900000] EXT3-fs: mounted filesystem with ordered data mode.> [17179597.920000] kjournald starting. Commit interval 5 seconds> [17179597.932000] EXT3 FS on hda7, internal journal> [17179597.932000] EXT3-fs: mounted filesystem with ordered data mode.> [17179602.200000] ACPI: AC Adapter [ACAD] (on-line)> [17179602.340000] ACPI: Battery Slot [BAT1] (battery present)> [17179602.352000] ACPI: Power Button (FF) [PWRF]> [17179602.352000] ACPI: Power Button (CM) [PWRB]> [17179602.352000] ACPI: Lid Switch [LID]> [17179602.468000 ] ibm_acpi: ec object not found> [17179602.492000] pcc_acpi: loading...> [17179602.584000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)> [17179602.780000] powernow-k8: Found 1 AMD Athlon 64 / Opteron> processors (version 1.60.2)> [17179602.784000] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x2 (1500 mV)> [17179602.784000] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa (1300 mV)> [17179602.784000] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x12 (1100 mV)> [17179602.784000] cpu_init done, current fid 0xe, vid 0x0> [17179602.784000] powernow-k8: ph2 null fid transition 0xe> [17179605.132000] apm: BIOS not found.> [17179606.812000] eth0: no IPv6 routers present>
