Antonio For Class 0780: 11c1:0440 Communication controller: Agere Systems 56k WinModem, The older ltmodem+ltserial codes are no longer effective for 2.6.15-15-386 and later kernels. Get the successor from http://phep2.technion.ac.il/linmodems/packages/ltmodem/kernel-2.6/martian/ the martian-full-20061203.tar.gz Additionally you may have to install packages linux-headers-2.6.15-15-386 and linux-headers-2.6.15-15 to support compiling. Below are some operation details, complemented by the package documentation. MarvS scanModem maintainer --------- Modems with Lucent/Agere DSP chipsets -------------------------------------- For Lucent/Agere/Xircom modems with DSP (digital signal processing) chipsets http://phep2.technion.ac.il/linmodems/packages/ltmodem/kernel-2.6/martian/ has the support packages and information for 2.6.n kernels. In Alexei Chentsov's new martian approach, the overall support is two component: 1) The driver loaded onto the running kernel, martian_drv, is Open Source; 2) The proprietary and closed source component from Agere Systems, ltmdobj.o, is compiled into a martian_modem helper application. It must be left running during a dialout session. AMD x86x-64 processors are supported though only in 32 bit mode. Beware that the martian_drv mostly provides low level contact with the hardware. The martian_modem provides higher level COMM functions and MUST be running throughout a dialout session. The modem port is in the dynamically created /dev/pts/N family, with symbolic link creatd by the martian_modem /dev/ttySM0 -->/dev/pts/N Usage of these ports requires that a line: Carrier Check = no be added to the configuration file /etc/wvdial.conf See the file wvdial.txt for details on this usage. For martian concept details see: http://martian.barrelsoutofbond.org To automate martian_modem action upon martian_drv loading, the following SINGLE line can be added to one of the files /etc/modprobe* or to a new file /etc/modprobe.d/martian install martian_drv modprobe --ignore-install martian_drv ; /usr/sbin/martian_modem However, there is a report that (at least in some Systems), boot up processes are slowed. This is associated with bootup testing of potentially needed modules. Thus you may choose not to use this automation. On 2/3/07, antonio.carusi@xxxxxxxxxx <antonio.carusi@xxxxxxxxxx> wrote:
Hello, I'm working on Ubuntu 6.04 Dapper Drake, Kernel 2.6.15. And I can't work with neither the ADSL since I've an USB modem, nor 56k PCI Lucent modem since the system doesn't communicate with it. Then I tried to install the driver for the analogue modem but It didn't work. I hope that's enough for you to debug the problem. Thank You Very Much for helping me Best Regards Antonio Naviga e telefona senza limiti con Tiscali Scopri le promozioni Tiscali adsl: navighi e telefoni senza canone Telecom http://abbonati.tiscali.it/adsl/
