Re: bernies-dell, USA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Felix

All the diagnostics are promising for the below working out.
-----------
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.tar.gz having a compiled slmodemd. Unpack
under Linux with:
      $ tar zxf SLMODEMD.gcc4.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
       slmodemd -c USA --alsa modem:1
reporting dynamic creation of ports:
      /dev/ttySL0 --> /dev/pts/N   , with N some number
Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
----------
MarvS
scanModem maintainer

On 1/3/07, Felix Miata <mrmazda@xxxxxx> wrote:
http://lists.opensuse.org/opensuse/2007-01/msg00204.html is the
PCTEL 2304WT v.92 MDC mailing list thread which lead to my submitting this.

This is not my Dell C610/C640 laptop. Its owner entrusted me to solve his
problem with W2K no longer recognizing the modem after he randomly deleted
various files following failure to connect to his ISP after his ISP's phone
numbers went bad. I repartitioned to provide space for SUSE, then installed
XP using the Dell custom XP installation CD, which failed to find the modem.
After several attempts to install various drivers without success, not knowing
that the ISP phone numbers were bad and with the XP driver always failing to
make any audible indication that it was doing anything at all. I proceeded
to install SUSE 10.0 from the boxed DVD.

The modem worked immediately on completion of the 10.0 installation, though
I still had no usable connection from the bad phone numbers, so I rebooted
XP. Eventually I found the R53654 driver on the Dell web site. Once that was
installed I managed to find out about the bad phone numbers, and XP was then
able to connect to his ISP.

Next I installed OpenSUSE 10.2 from HTTP. The modem failed initial testing,
unlike 10.0. I got the 10.2 boxed DVD and tried again, failing in same manner.
So, here's the ModemData.txt file.

--------------------------  System information ----------------------------

Welcome to openSUSE 10.2 (i586) - Kernel
Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
 scanModem update of:  2006_December_25


USB modem not detected by lsusb

Modem or host audio card candidates have firmware information:

 PCI slot       PCI ID          SubsystemID     Name
 ----------     ---------       ---------       --------------
 00:1f.6        8086:2486       134d:4c21       Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller

 Modem interrupt assignment and sharing:
  5:        404          XT-PIC  Intel 82801CA-ICH3, Intel 82801CA-ICH3 Modem

 --- Bootup diagnositcs for card in PCI slot 00:1f.6 ----
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1f.6 to 64

 The PCI slot 00:1f.6 of the modem card may be disabled early in
 a bootup process,  but then enabled later. If modem drivers load
 but the  modem is not responsive, read Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.


 === Finished modem firmware and bootup diagnostics section. ===
 === Next deducing cogent software ===

 For candidate modem in PCI bus:  00:1f.6
   Class 0703: 8086:2486 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller
      Primary PCI_id  8086:2486
    Subsystem PCI_id  134d:4c21 , 134d is an ALSA compatible identification
    Softmodem codec or Vendor from diagnostics: SIL21, a Pctel type.
                              from    Archives: SIL21, a Pctel type.


 Lacking a dsp (digital signal processing) chip, the modem is a software
 intensive or "softmodem" type. Its primary controller manages the traffic
 with the CPU. But the software needed is specified in the Subsystem.
 -----------------------------------------
Support type needed or chipset: slmodemd

 An ALSA (Advanced Linux Sound Architecture) modem driver:  snd-intel8x0m
 provides Low Level support enabling contact with the modem hardware.
 For all BUT Conexant chip soft modems (using hsfmodem software)
 complementary High Level support is through a Smartlink utility:  slmodemd

 Download from http://linmodems.technion.ac.il/packages/smartlink/
 the package SLMODEMD.gcc4.tar.gz having a compiled slmodemd. Unpack under Linux with:
        $ tar zxf SLMODEMD.gcc4.tar.gz
 and read instructions therein. But briefly, the modem is setup with command:
         slmodemd -c YOUR_COUNTRY --alsa modem:1
 reporting dynamic creation of ports:
        /dev/ttySL0 --> /dev/pts/N   , with N some number
 Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.

 Already loaded into the kernel is snd-intel8x0m and audio drivers it depends on,
 displayed by:  lsmod | grep snd_intel8x0m
Module                  Size  Used by
-------------------------------------
snd_intel8x0m          21388  0
snd_ac97_codec         95648  2 snd_intel8x0m,snd_intel8x0
snd_pcm                86916  4 snd_intel8x0m,snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd                    61188  11 snd_intel8x0m,snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc         14472  3 snd_intel8x0m,snd_intel8x0,snd_pcm


The diagnostic outputs for this softmodem section have their raw information in
folders and text files under /proc/asound/ which you can browse. The information
is from files:
        /proc/asound/pcm
-------------------------------
00-01: Intel ICH - MIC ADC : Intel 82801CA-ICH3 - MIC ADC : capture 1
00-00: Intel ICH : Intel 82801CA-ICH3 : playback 1 : capture 1
01-00: Intel ICH - Modem : Intel 82801CA-ICH3 Modem - Modem : playback 1 : capture 1

        /proc/asound/modules
-------------------------------
 0 snd_intel8x0
 1 snd_intel8x0m
        /proc/asound/card1/codec97#0/mc97#1-1+regs
-------------------------------
0:7c = 5349  and  0:7e = 4c21
which were translated from hexadecimal code into:  SIL21

        /proc/asound/card1/codec97#0/mc97#1-1
-------------------------------
Extended modem ID: codec=1 LIN1

and from the command:
        aplay -l | grep -i modem
card 1: Modem [Intel 82801CA-ICH3 Modem], device 0: Intel ICH - Modem [Intel 82801CA-ICH3 Modem - Modem]

----------------end Softmodem section --------------

Writing Intel.txt
Writing Smartlink.txt
============ end Smartlink section =====================

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 The kernel was compiled with gcc version 4.1.2 and a compiler is not installed

 Kernel-header resources needed for compiling are not manifestly ready!

 If compiling is necessary packages must be installed, providing:
        gcc-4.1  kernel-source-2.6.18.2-34-default


Checking pppd properties:
        -rwxr-xr-x 1 root dialout 295488 Nov 25 14:50 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
        $ su - root  (not for Ubuntu)
         chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
         chmod a+x /usr/sbin/pppd

Checking settings of:   /etc/ppp/options
noipdefault
noauth
crtscts
lock
modem
asyncmap 0
nodetach
lcp-echo-interval 30
lcp-echo-failure 4
lcp-max-configure 60
lcp-restart 2
idle 600
noipx
file /etc/ppp/filters

Read Modem/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
     Within /etc/udev/ files:
/etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave",                NAME="modems/%k", GROUP="uucp"
/etc/udev/rules.d/31-network.rules:SUBSYSTEM=="net", ENV{INTERFACE}=="ppp*|ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*|bond*|vlan*|modem*|dsl*", GOTO="skip_ifup"
     Within /etc/modprobe.conf files:
/etc/modprobe.conf:# Linux ACP modem (Mwave)
/etc/modprobe.d/blacklist:# ALSA PCI sound/modem modules - should be configured via yast
/etc/modprobe.d/blacklist:blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist:blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------
--
"I have come that they may have life, and have it to the full."
                                                John 10:10 NIV

 Team OS/2 ** Reg. Linux User #211409

Felix Miata  ***  http://mrmazda.no-ip.com/


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux