if i have understood this correctly, to get my modem working i should
simply follow the instructions on conexant.txt or smartlink.txt?
thanks for the support, luke
_________________________________________________________________
MSN Hotmail is evolving – check out the new Windows Live Mail
http://ideas.live.com
Only plain text email is forwarded by the DISCUSS@xxxxxxxxxxxxx List
Server.
Do use the following as the email Subject Line:
SomeName, YourCountry Ubuntu 6.06 LTS kernel 2.6.15-23-386
This will alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at
http://www.linmodems.org .
Local Linux experts can be found through:
http://www.linux.org/groups/index.html
-------------------------- System information ----------------------------
Ubuntu 6.06 LTS
Linux version 2.6.15-23-386 (buildd@rothera) (gcc version 4.0.3 (Ubuntu
4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006
scanModem update of: 2006_December_25
USB modem not detected by lsusb
Modem or host audio card candidates have firmware information:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
0000:04:09.0 2000:2800 122d:2800 Modem: Smart Link Ltd.:
Unknown device 2800
Modem interrupt assignment and sharing:
--- Bootup diagnositcs for card in PCI slot 0000:04:09.0 ----
[4294671.754000] ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [LNKB] ->
GSI 19 (level, low) -> IRQ 209
[4294671.754000] ACPI: PCI interrupt for device 0000:04:09.0 disabled
The PCI slot 0000:04:09.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
0000:00:10.1 10de:026c 10de:cb84 0403: nVidia Corporation MCP51
High Definition Audio
Modem interrupt assignment and sharing:
225: 3471 IO-APIC-level libata, HDA Intel
--- Bootup diagnositcs for card in PCI slot 0000:00:10.1 ----
[4294687.439000] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] ->
GSI 22 (level, low) -> IRQ 225
[4294687.439000] PCI: Setting latency timer of device 0000:00:10.1 to 64
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
For candidate modem in PCI bus: 0000:00:10.1
Class 0403: 10de:026c 0403: nVidia Corporation MCP51 High Definition
Audio
Primary PCI_id 10de:026c
Subsystem PCI_id 10de:cb84
Softmodem codec or Vendor from diagnostics:
from Archives:
Lacking a dsp (digital signal processing) chip, the modem is a software
intensive or "softmodem" type. Its primary controller manages the traffic
with the CPU. But the software needed is specified in the Subsystem.
-----------------------------------------
Support type needed or chipset:
Support can likely be achieved through two mutually exclusive alternatives:
1) An ALSA modem driver plus slmodemd. Read Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.tar.gz from:
http://linmodems.technion.ac.il/packages/smartlink/
2) The hsfmodem software for Conexant chipset modems: Read Conexant.txt
An ALSA (Advanced Linux Sound Architecture) modem driver: snd-intel8x0m
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.tar.gz having a compiled slmodemd. Unpack
under Linux with:
$ tar zxf SLMODEMD.gcc4.tar.gz
and read instructions therein. But briefly, the modem is setup with
command:
sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
The diagnostic outputs for this softmodem section have their raw
information in
folders and text files under /proc/asound/ which you can browse. The
information
is from files:
/proc/asound/pcm
-------------------------------
00-00: AD198x Analog : AD198x Analog : playback 1 : capture 1
00-01: AD198x Digital : AD198x Digital : playback 1
/proc/asound/modules
-------------------------------
0 snd_hda_intel
and from the command:
aplay -l | grep -i modem
----------------end Softmodem section --------------
scanModem could not identify the Support Type needed from diagnosics or
archives.
If an alternative boot into Microsoft windows can be done, do mouse
clicks on:
Start > Settings > Control Panel > Classical View (for Window XP) >
System
Hardware > Device Manager > Modems > Click on the + > Modem. Double
click to
expand the graphic. Manufacturer information may be displayed. For
example, CXT
stands for Conexant. Click the Diagnostics Tab. Record any hardware ID
or vendor
and device information.
Next do the Query Modem and record the ATI specifications displayed such
as:
ATI3 - Agere SoftModem Version 2.1.22
ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
Try to identify the modem setup file, with name perhaps MODEM.INF.
If may contain chipset Vendor informaton.
Formal support for Conexant chipset modems are available ONLY through
http://www.linuxant.com/drivers. Read Conexant.txt for details.
and Modem/YourSystem.txt for follow through guidance. Driver speed is
limited to
14,400 until a key is purchased. There is NO freeware alternative.
There are two support package types: hsfmodem and hcflinmodem.
http://www.lorenzobettini.it/linux/LinuxSonyVaioVGN-S5VP_B reports a
problem and solution in stalling a key, after testing of the free low
speed download.
Read Conexant.txt
Writing Conexant.txt
Writing Smartlink.txt
============ end Smartlink section =====================
For candidate modem in PCI bus: 0000:04:09.0
Class 0703: 2000:2800 Modem: Smart Link Ltd.: Unknown device 2800
Primary PCI_id 2000:2800
Support type needed or chipset: slamr
The modem is supported by the Smartlink slamr driver
plus the slmodemd helper utility. Read the
Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
Download slamr-2.6.15-23-386.tgz from
http://linmodems.technion.il/packages/smartlink/
under Linux, open a terminal and unpack with:
$ tar zxvf slamr-2.6.15-23-386.tgz
Move into the unpacked folder
$ cd slamr-2.6.15-23-386
Look around
$ ls
Run the
$ sudo ./setup
Afterwards do:
$ slmodemd --help
$ slmodemd --countrylist &> Clist.txt
If not in the USA, look for your COUNTRY_NAME therein.
Do and edit with:
$ sudo gedit /etc/default/sl-modem-daemon
and therein replace the USA in the line:
SLMODEMD_COUNTRY=USA
This will provide for the correct Country setting in the automated:
slmodemd -c COUNTRY /dev/slamr0
Read the Smartlink.txt and YourSystem.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
The kernel was compiled with gcc version 4.0.3 and a compiler is not
installed
If compiling a modem driver proves to be necessary, one of the two
procedures must be followed.
If not yet on the Internet, put the Dapper install CD in the drive
Open a terminal and therein:
$ sudo apt-get install gcc-4.0 make
Additionally the package linux-headers-2.6.15-23-386 must be downloaded.
Go to http://packages.ubuntu.com/ and search for
linux-headers-2.6.15-23-386
After downloading, it can be installed with:
$ sudo dpkg -i linux-header*.deb
Or alternatively if online through Ethernet do:
$ sudo apt-get update
$ sudo apt-get install build-essential
will do all the necessary installations mentioned above.
In either installation case, set a symbolic link which will be expected
later:
$ sudo ln -s /usr/bin/gcc-4.0 /usr/bin/gcc
After check with:
$ ls -l /usr/bin/gcc*
which should display:
lrwxrwxrwx 1 root root 16 2006-07-09 21:53 /usr/bin/gcc ->
/usr/bin/gcc-4.0
-rwxr-xr-x 1 root root 93584 2006-04-20 18:22 /usr/bin/gcc-4.0
-rwxr-xr-x 1 root root 16245 2006-04-20 18:13 /usr/bin/gccbug-4.0
Kernel-header resources needed for compiling are not manifestly ready!
If compiling is necessary packages must be installed, providing:
gcc-4.0 make linux-headers-2.6.15-23-386
Checking pppd properties:
-rwsr-xr-- 1 root dip 257720 2006-02-23 16:33 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
auth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
Read Modem/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/60-symlinks.rules:# Create /dev/modem symlink
/etc/udev/rules.d/60-symlinks.rules:KERNEL=="ttyLTM[0-9]*",
SYMLINK+="modem"
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to
blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
