Here is my dmesg.txt:
CPU0
0: 12233253 IO-APIC-edge timer
1: 541 IO-APIC-edge i8042
7: 3 IO-APIC-edge parport0
8: 1 IO-APIC-edge rtc
9: 164 IO-APIC-level acpi
12: 189418 IO-APIC-edge i8042
14: 243384 IO-APIC-edge ide0
50: 0 IO-APIC-level sdhci:slot0, sdhci:slot1, sdhci:slot2
169: 730700 IO-APIC-level i915@pci:0000:00:02.0, eth0
177: 1 IO-APIC-level yenta, uhci_hcd:usb3
185: 149 IO-APIC-level yenta, uhci_hcd:usb4
209: 3 IO-APIC-level ohci1394, Intel ICH6 Modem
217: 4 IO-APIC-level uhci_hcd:usb1, ehci_hcd:usb5
225: 1217331 IO-APIC-level uhci_hcd:usb2
233: 793483 IO-APIC-level ipw2200, Intel ICH6
NMI: 0
LOC: 12233143
ERR: 0
MIS: 0
Linux version 2.6.18-1.2849.fc6
(brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.1 20061011
(Red Hat 4.1.1-30)) #1 SMP Fri Nov 10 12:45:28 EST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)
BIOS-e820: 000000003f7d0000 - 000000003f7eda00 (reserved)
BIOS-e820: 000000003f7eda00 - 000000003f7fb000 (ACPI NVS)
BIOS-e820: 000000003f7fb000 - 000000003f800000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
119MB HIGHMEM available.
896MB LOWMEM available.
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 260048
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 30672 pages, LIFO batch:7
DMI 2.3 present.
Using APIC driver default
IO/L-APIC allowed because system is MP or new enough
ACPI: RSDP (v000 HP ) @ 0x000fe270
ACPI: RSDT (v001 HP 099C 0x24010620 HP 0x00000001) @ 0x3f7eda84
ACPI: FADT (v002 HP 099C 0x00000002 HP 0x00000001) @ 0x3f7eda00
ACPI: MADT (v001 HP 099C 0x00000001 HP 0x00000001) @ 0x3f7edab8
ACPI: MCFG (v001 HP 099C 0x00000001 HP 0x00000001) @ 0x3f7edb14
ACPI: SSDT (v001 HP HPQPpc 0x00001001 MSFT 0x0100000e) @ 0x3f7f9dc3
ACPI: DSDT (v001 HP DAU00 0x00010000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfec01000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3f800000:a0800000)
Detected 1995.098 MHz processor.
Built 1 zonelists. Total pages: 260048
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
mapped APIC to ffffd000 (fec01000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07af000 soft=c078f000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1023940k/1040192k available (2139k kernel code, 15492k
reserved, 866k data, 244k init, 122688k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3992.52 BogoMIPS (lpj=1996262)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000
00000180 00000000 00000000
CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000
00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9f3ff 00100000 00000000 00000040
00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20060707
CPU0: Intel(R) Pentium(R) M processor 2.00GHz stepping 08
Total of 1 processors activated (3992.52 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=424 bytes
sizeof(dentry)=148 bytes
sizeof(ext3inode)=600 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=172 bytes
sizeof(task_struct)=1392 bytes
checking if image is initramfs... it is
Freeing initrd memory: 2124k freed
HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [C002] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.C002] bus is 0
Boot video device is 0000:00:02.0
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1100-113f claimed by ICH6 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #04 (-#07) is hidden behind transparent bridge #02 (-#04)
(try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C089._PRT]
ACPI: Embedded Controller [C004] (gpe 16) interrupt mode.
ACPI: Power Resource [C1C7] (on)
ACPI: Power Resource [C1CF] (on)
ACPI: Power Resource [C1D6] (on)
ACPI: Power Resource [C1E6] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C0ED._PRT]
ACPI: PCI Interrupt Link [C0F9] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C0FA] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0FB] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0FC] (IRQs *10 11)
ACPI: PCI Interrupt Link [C10F] (IRQs *10 11)
ACPI: PCI Interrupt Link [C110] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C111] (IRQs *10 11)
ACPI: PCI Interrupt Link [C112] (IRQs 10 11) *0, disabled.
ACPI: Power Resource [C2AB] (off)
ACPI: Power Resource [C2AC] (off)
ACPI: Power Resource [C2AD] (off)
ACPI: Power Resource [C2AE] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0c: ioport range 0x1000-0x107f could not be reserved
pnp: 00:0c: ioport range 0x1100-0x113f has been reserved
pnp: 00:0c: ioport range 0x1200-0x121f has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bus 3, cardbus bridge: 0000:02:06.0
IO window: 00003000-000030ff
IO window: 00003400-000034ff
PREFETCH window: 40000000-41ffffff
MEM window: 44000000-45ffffff
PCI: Bus 4, cardbus bridge: 0000:02:06.1
IO window: 00003800-000038ff
IO window: 00003c00-00003cff
PREFETCH window: 42000000-43ffffff
MEM window: 46000000-47ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 3000-3fff
MEM window: d0000000-d03fffff
PREFETCH window: 40000000-43ffffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 177
ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 19 (level, low) -> IRQ 185
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1167143037.332:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key CA06D81CB13FD94
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Transitioning device [C2AF] to D3
ACPI: Transitioning device [C2AF] to D3
ACPI: Fan [C2AF] (off)
ACPI: Transitioning device [C2B0] to D3
ACPI: Transitioning device [C2B0] to D3
ACPI: Fan [C2B0] (off)
ACPI: Transitioning device [C2B1] to D3
ACPI: Transitioning device [C2B1] to D3
ACPI: Fan [C2B1] (off)
ACPI: Transitioning device [C2B2] to D3
ACPI: Transitioning device [C2B2] to D3
ACPI: Fan [C2B2] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [C000] (supports 8 throttling states)
ACPI: Thermal Zone [TZ1] (39 C)
ACPI: Thermal Zone [TZ2] (19 C)
ACPI: Thermal Zone [TZ3] (17 C)
ACPI: Thermal Zone [TZ4] (39 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 915GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xc0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS2 at I/O 0x3e8 (irq = 3) is a 16550A
00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 22 (level, low) -> IRQ 209
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169
ICH6: chipset revision 3
ICH6: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2580-0x2587, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: FUJITSU MHT2040AH, ATA DISK drive
hdb: MATSHITAUJ-840D, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2
ide-floppy driver 0.99.newide
Yenta: CardBus bridge found at 0000:02:06.0 [103c:099c]
Yenta: Enabling burst memory read transactions
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:06.0, mfunc 0x01aa1b22, devctl 0x64
Yenta: ISA IRQ mask 0x0cf8, PCI irq 177
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
cs: IO port probe 0x3000-0x3fff: clean.
pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd03fffff
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
Yenta: CardBus bridge found at 0000:02:06.1 [103c:099c]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:06.1, mfunc 0x01aa1b22, devctl 0x64
Yenta: ISA IRQ mask 0x0cf8, PCI irq 185
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#02) from #04 to #07
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
cs: IO port probe 0x3000-0x3fff: clean.
pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd03fffff
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:C1E3,PNP0f13:C1E4] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 244k freed
Write protecting the kernel read-only data: 386k
Time: tsc clocksource has been installed.
Time: acpi_pm clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
synaptics reset failed
synaptics reset failed
synaptics reset failed
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 217, io base 0x00002000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
serio: Synaptics pass-through port at isa0060/serio4/input0
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 225, io base 0x00002020
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
input: SynPS/2 Synaptics TouchPad as /class/input/input1
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 177, io base 0x00002040
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 185, io base 0x00002060
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
usb 2-2: new full speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 217, io mem 0xd0580000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@xxxxxxxxxx
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb 2-2: new full speed USB device using uhci_hcd and address 3
usb 2-2: configuration #1 chosen from 1 choice
audit(1167143046.624:2): enforcing=1 old_enforcing=0 auid=4294967295
security: 3 users, 6 roles, 1580 types, 170 bools, 1 sens, 1024 cats
security: 59 classes, 49346 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1167143047.015:3): policy loaded auid=4294967295
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:02:06.2[C] -> GSI 22 (level, low) -> IRQ 209
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[209]
MMIO=[d0003000-d00037ff] Max Packet=[2048] IR/IT contexts=[4/8]
ieee80211_crypt: registered algorithm 'NULL'
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new driver hci_usb
intel_rng: FWH not detected
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
tg3.c:v3.65 (August 07, 2006)
ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 16 (level, low) -> IRQ 169
eth0: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)]
(PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:14:c2:d7:96:b7
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) -> IRQ 233
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
Floppy drive(s): fd0 is 1.44M
input: PC Speaker as /class/input/input2
sdhci: Secure Digital Host Controller Interface driver, 0.12
sdhci: Copyright(c) Pierre Ossman
cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
hdb: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.20
ieee1394: Host added: ID:BUS[0-00:1023] GUID[718b500029d547a6]
ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 21 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1e.2 to 64
intel8x0_measure_ac97_clock: measured 50480 usecs
intel8x0: clocking to 48000
sdhci: SDHCI controller found at 0000:02:06.4 [104c:8034] (rev 0)
ACPI: PCI Interrupt 0000:02:06.4[D] -> GSI 20 (level, low) -> IRQ 50
mmc0: SDHCI at 0xd000a000 irq 50 DMA
mmc1: SDHCI at 0xd000b000 irq 50 DMA
mmc2: SDHCI at 0xd000c000 irq 50 DMA
PCI: Enabling device 0000:00:1e.3 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 22 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:1e.3 to 64
MC'97 1 converters and GPIO not ready (0xf000)
floppy0: no floppy controllers found
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
lp0: console ready
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: AC Adapter [C193] (on-line)
ACPI: Battery Slot [C195] (battery present)
ACPI: Battery Slot [C194] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [C209]
ACPI: Lid Switch [C20A]
ibm_acpi: ec object not found
ACPI: Video Device [C076] (multi-head: yes rom: no post: no)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.4 loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1
extents:1 across:2031608k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8126 buckets, 65008 max) - 228 bytes per conntrack
process `sysctl' is using deprecated sysctl (syscall)
net.ipv6.neigh.lo.base_reachable_time; Use
net.ipv6.neigh.lo.base_reachable_time_ms instead.
PM: Writing back config space on device 0000:02:0e.0 at offset c (was
ffee0000, writing 0)
PM: Writing back config space on device 0000:02:0e.0 at offset b (was
165d14e4, writing 99c103c)
PM: Writing back config space on device 0000:02:0e.0 at offset 3 (was
0, writing 4010)
PM: Writing back config space on device 0000:02:0e.0 at offset 2 (was
2000000, writing 2000003)
PM: Writing back config space on device 0000:02:0e.0 at offset 1 (was
2b00000, writing 2b00006)
PM: Writing back config space on device 0000:02:0e.0 at offset 0 (was
165d14e4, writing 165e14e4)
ADDRCONF(NETDEV_UP): eth0: link is not ready
PM: Writing back config space on device 0000:02:0e.0 at offset b (was
165d14e4, writing 99c103c)
PM: Writing back config space on device 0000:02:0e.0 at offset 3 (was
0, writing 4010)
PM: Writing back config space on device 0000:02:0e.0 at offset 2 (was
2000000, writing 2000003)
PM: Writing back config space on device 0000:02:0e.0 at offset 1 (was
2b00000, writing 2b00006)
PM: Writing back config space on device 0000:02:0e.0 at offset 0 (was
165d14e4, writing 165e14e4)
eth1: NETDEV_TX_BUSY returned; driver should report queue full via
ieee_device->is_queue_full.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
audit(1167143122.751:4): avc: denied { getattr } for pid=2868
comm="hald" name="auto.misc" dev=dm-0 ino=6810540
scontext=system_u:system_r:hald_t:s0
tcontext=system_u:object_r:automount_etc_t:s0 tclass=file
audit(1167143122.866:5): avc: denied { getattr } for pid=2868
comm="hald" name="auto.misc" dev=dm-0 ino=6810540
scontext=system_u:system_r:hald_t:s0
tcontext=system_u:object_r:automount_etc_t:s0 tclass=file
PM: Writing back config space on device 0000:02:0e.0 at offset b (was
165d14e4, writing 99c103c)
PM: Writing back config space on device 0000:02:0e.0 at offset 3 (was
0, writing 4010)
PM: Writing back config space on device 0000:02:0e.0 at offset 2 (was
2000000, writing 2000003)
PM: Writing back config space on device 0000:02:0e.0 at offset 1 (was
2b00000, writing 2b00006)
PM: Writing back config space on device 0000:02:0e.0 at offset 0 (was
165d14e4, writing 165e14e4)
ADDRCONF(NETDEV_UP): eth0: link is not ready
audit(1167143130.219:6): avc: denied { getattr } for pid=2868
comm="hald" name="auto.misc" dev=dm-0 ino=6810540
scontext=system_u:system_r:hald_t:s0
tcontext=system_u:object_r:automount_etc_t:s0 tclass=file
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
[drm] Initialized i915 1.5.0 20060119 on minor 0
audit(1167147016.585:7): avc: denied { search } for pid=3281
comm="0logwatch" name="clamav" dev=dm-0 ino=4260759
scontext=system_u:system_r:logwatch_t:s0-s0:c0.c1023
tcontext=system_u:object_r:clamd_var_log_t:s0 tclass=dir
audit(1167147016.586:8): avc: denied { search } for pid=3281
comm="0logwatch" name="clamav" dev=dm-0 ino=4260759
scontext=system_u:system_r:logwatch_t:s0-s0:c0.c1023
tcontext=system_u:object_r:clamd_var_log_t:s0 tclass=dir
audit(1167147016.586:9): avc: denied { search } for pid=3281
comm="0logwatch" name="clamav" dev=dm-0 ino=4260759
scontext=system_u:system_r:logwatch_t:s0-s0:c0.c1023
tcontext=system_u:object_r:clamd_var_log_t:s0 tclass=dir
audit(1167147016.586:10): avc: denied { search } for pid=3281
comm="0logwatch" name="clamav" dev=dm-0 ino=4260759
scontext=system_u:system_r:logwatch_t:s0-s0:c0.c1023
tcontext=system_u:object_r:clamd_var_log_t:s0 tclass=dir
audit(1167147016.588:11): avc: denied { read } for pid=3281
comm="0logwatch" name="clamav" dev=dm-0 ino=4260759
scontext=system_u:system_r:logwatch_t:s0-s0:c0.c1023
tcontext=system_u:object_r:clamd_var_log_t:s0 tclass=dir
audit(1167147016.588:12): avc: denied { read } for pid=3281
comm="0logwatch" name="clamav" dev=dm-0 ino=4260759
scontext=system_u:system_r:logwatch_t:s0-s0:c0.c1023
tcontext=system_u:object_r:clamd_var_log_t:s0 tclass=dir
audit(1167147018.496:13): avc: denied { getattr } for pid=3350
comm="sendmail" name="root" dev=dm-0 ino=8478625
scontext=system_u:system_r:system_mail_t:s0-s0:c0.c1023
tcontext=root:object_r:user_home_dir_t:s0 tclass=dir
audit(1167147303.517:14): avc: denied { read } for pid=3525
comm="prelink" name="powermanga" dev=dm-0 ino=1406769
scontext=system_u:system_r:prelink_t:s0-s0:c0.c1023
tcontext=system_u:object_r:usr_t:s0 tclass=file
audit(1167147303.517:15): avc: denied { read } for pid=3525
comm="prelink" name="viruskiller" dev=dm-0 ino=1406775
scontext=system_u:system_r:prelink_t:s0-s0:c0.c1023
tcontext=system_u:object_r:usr_t:s0 tclass=file
audit(1167147303.546:16): avc: denied { read } for pid=3525
comm="prelink" name="vulturesclaw" dev=dm-0 ino=2921576
scontext=system_u:system_r:prelink_t:s0-s0:c0.c1023
tcontext=system_u:object_r:usr_t:s0 tclass=file
audit(1167147303.574:17): avc: denied { read } for pid=3525
comm="prelink" name="uqm" dev=dm-0 ino=7103713
scontext=system_u:system_r:prelink_t:s0-s0:c0.c1023
tcontext=system_u:object_r:usr_t:s0 tclass=file
audit(1167147303.688:18): avc: denied { read } for pid=3525
comm="prelink" name="vultureseye" dev=dm-0 ino=1967965
scontext=system_u:system_r:prelink_t:s0-s0:c0.c1023
tcontext=system_u:object_r:usr_t:s0 tclass=file
audit(1167147303.688:19): avc: denied { read } for pid=3525
comm="prelink" name="starfighter" dev=dm-0 ino=1406752
scontext=system_u:system_r:prelink_t:s0-s0:c0.c1023
tcontext=system_u:object_r:usr_t:s0 tclass=file
audit(1167147412.070:20): avc: denied { add_name } for pid=3525
comm="prelink" name="nethack.#prelink#.41VYqL"
scontext=system_u:system_r:prelink_t:s0-s0:c0.c1023
tcontext=system_u:object_r:usr_t:s0 tclass=dir
audit(1167147412.071:21): avc: denied { add_name } for pid=3525
comm="prelink" name="#prelink#.LL6ZER"
scontext=system_u:system_r:prelink_t:s0-s0:c0.c1023
tcontext=system_u:object_r:tmp_t:s0 tclass=dir
audit(1167147412.071:22): avc: denied { add_name } for pid=3525
comm="prelink" name="#prelink#.QVkHRX"
scontext=system_u:system_r:prelink_t:s0-s0:c0.c1023
tcontext=system_u:object_r:tmpfs_t:s0 tclass=dir
audit(1167147599.108:23): avc: denied { getattr } for pid=8073
comm="sendmail" name="root" dev=dm-0 ino=8478625
scontext=system_u:system_r:system_mail_t:s0-s0:c0.c1023
tcontext=root:object_r:user_home_dir_t:s0 tclass=dir
PM: Writing back config space on device 0000:02:0e.0 at offset b (was
165d14e4, writing 99c103c)
PM: Writing back config space on device 0000:02:0e.0 at offset 3 (was
0, writing 4010)
PM: Writing back config space on device 0000:02:0e.0 at offset 2 (was
2000000, writing 2000003)
PM: Writing back config space on device 0000:02:0e.0 at offset 1 (was
2b00000, writing 2b00006)
PM: Writing back config space on device 0000:02:0e.0 at offset 0 (was
165d14e4, writing 165e14e4)
PM: Writing back config space on device 0000:02:0e.0 at offset b (was
165d14e4, writing 99c103c)
PM: Writing back config space on device 0000:02:0e.0 at offset 3 (was
0, writing 4010)
PM: Writing back config space on device 0000:02:0e.0 at offset 2 (was
2000000, writing 2000003)
PM: Writing back config space on device 0000:02:0e.0 at offset 1 (was
2b00000, writing 2b00006)
PM: Writing back config space on device 0000:02:0e.0 at offset 0 (was
165d14e4, writing 165e14e4)
ADDRCONF(NETDEV_UP): eth0: link is not ready
PM: Writing back config space on device 0000:02:0e.0 at offset b (was
165d14e4, writing 99c103c)
PM: Writing back config space on device 0000:02:0e.0 at offset 3 (was
0, writing 4010)
PM: Writing back config space on device 0000:02:0e.0 at offset 2 (was
2000000, writing 2000003)
PM: Writing back config space on device 0000:02:0e.0 at offset 1 (was
2b00000, writing 2b00006)
PM: Writing back config space on device 0000:02:0e.0 at offset 0 (was
165d14e4, writing 165e14e4)
usb 2-2: USB disconnect, address 3
usb 2-2: new full speed USB device using uhci_hcd and address 4
usb 2-2: configuration #1 chosen from 1 choice
ipw2200: Failed to send CARD_DISABLE: Command timed out.
PM: Writing back config space on device 0000:02:0e.0 at offset b (was
165d14e4, writing 99c103c)
PM: Writing back config space on device 0000:02:0e.0 at offset 3 (was
0, writing 4010)
PM: Writing back config space on device 0000:02:0e.0 at offset 2 (was
2000000, writing 2000003)
PM: Writing back config space on device 0000:02:0e.0 at offset 1 (was
2b00000, writing 2b00006)
PM: Writing back config space on device 0000:02:0e.0 at offset 0 (was
165d14e4, writing 165e14e4)
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is off for TX and off for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
audit(1167154616.480:24): avc: denied { write } for pid=11549
comm="ifconfig" name="[88700]" dev=pipefs ino=88700
scontext=system_u:system_r:ifconfig_t:s0
tcontext=system_u:system_r:unconfined_t:s0 tclass=fifo_file
audit(1167154616.480:25): avc: denied { write } for pid=11549
comm="ifconfig" name="[88700]" dev=pipefs ino=88700
scontext=system_u:system_r:ifconfig_t:s0
tcontext=system_u:system_r:unconfined_t:s0 tclass=fifo_file
audit(1167154616.480:26): avc: denied { write } for pid=11549
comm="ifconfig" name="[87817]" dev=pipefs ino=87817
scontext=system_u:system_r:ifconfig_t:s0
tcontext=system_u:system_r:unconfined_t:s0 tclass=fifo_file
audit(1167154616.480:27): avc: denied { write } for pid=11549
comm="ifconfig" name="[87818]" dev=pipefs ino=87818
scontext=system_u:system_r:ifconfig_t:s0
tcontext=system_u:system_r:unconfined_t:s0 tclass=fifo_file
audit(1167154616.480:28): avc: denied { write } for pid=11549
comm="ifconfig" name="[87819]" dev=pipefs ino=87819
scontext=system_u:system_r:ifconfig_t:s0
tcontext=system_u:system_r:unconfined_t:s0 tclass=fifo_file
eth0: no IPv6 routers present
eth0: no IPv6 routers present
tg3: eth0: Link is down.
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is off for TX and off for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
