Re: Jos Vos, Netherlands Fedora Core release 6 (Zod) Kernel kernel 2.6.18-1.2868.fc6

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Jos:

RE: I used hw:0
--------
is not any device for this HDA class of Audio+modem cards
from files:
      /proc/asound/pcm
-------------------------------
00-02: ALC883 Digital : ALC883 Digital : playback 1
00-01: ALC883 Analog : ALC883 Analog : capture 2
00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 2
----------------------
These correspond respectively to:
hw:0,2
hw:0,1
hw:0,0
which are audio functions
When you install the new drivers, there likely will be a modem on
hw:0,N  , with N=3,4,5 or 6

MarvS

On 12/23/06, Jos Vos <jos@xxxxxx> wrote:
On Sat, Dec 23, 2006 at 07:31:51PM -0500, Marvin Stodolsky wrote:

> Depending on your kernel, one of
> kernel-devel-2.6.18-1.2798.fc6.i686.rpm
> kernel-devel-2.6.18-1.2798.fc6.i386.rpm
> must be installed to complete your compiling support.

I have kernel-devel installed (2868 i.s.o. 2798, matching my kernel ;-)).

> Then from http://www.alsa-project.org/ the version 1.0.14rc1 driver
> and lib packages.  Make a folder, say alsa/.
> $ mkdir alsa
>  Unpack both packages in the alsa/ folder
> $ tar jxf alsa*.tar.bz2
> will unpack both.  The versions 1.0.13 and later have the recognition
> code for the 0x11c11040 chip.

FC6 now has Alsa 1.0.12 installed, so that seems to be too old...

> This time rather than
>         slmodemd -c YOUR_COUNTRY --alsa
> there will be added device specification
>         slmodemd -c YOUR_COUNTRY --alsa hw:0,N
> when N will be likely 1 or 6

I used hw:0 now, as otherwise it failed anyway (hw:1 seems to be the
default and did not work).

> Hopefully its will announce port creation

It already does now...

> Sunday afternoon I will be begin a two week trip and will rarely be on
> line until Sept.9, if at all.

I'm having access to this laptop (a sample I borrowed from Intel) till
some day next week, so I hope to finalize the tests before (most of the
time till now went in getting wired and wireless Ethernet to work, as
well as solving video resume problems, as the modem is my last test
priority...).

I might have shortly access to a similar model later next month.

Thanks so far,

--
--    Jos Vos <jos@xxxxxx>
--    X/OS Experts in Open Systems BV   |   Phone: +31 20 6938364
--    Amsterdam, The Netherlands        |     Fax: +31 20 6948204


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux