Hello: I have these rules set up for an interface: IP=a.b.c.d DEV=v1208 /sbin/tc qdisc del dev $DEV root /sbin/tc qdisc add dev $DEV root handle 1: htb default 30 /sbin/tc class add dev $DEV parent 1: classid 1:1 htb rate 5mbit /sbin/tc class add dev $DEV parent 1: classid 1:2 htb rate 5mbit /sbin/tc filter add dev $DEV protocol ip parent 1:0 prio 1 u32 match ip dst $IP flowid 1:1 /sbin/tc filter add dev $DEV protocol ip parent 1:0 prio 1 u32 match ip src $IP flowid 1:2 /sbin/tc qdisc del dev $DEV ingress /sbin/tc qdisc add dev $DEV ingress handle ffff: /sbin/tc filter add dev $DEV parent ffff: protocol ip prio 50 u32 match ip src 0.0.0.0/0 police rate 5mbit burst 500k drop flowid :1 According to these rules, the ingress police rate should be 5 mbit/sec, but I am barely getting 50 kbits/sec through the interface. If I remove the filter, the interface operates at full line rate. Any ideas why the ingress filter is being so aggressive? Thanks, Neil -- Neil Aggarwal, (972)834-1565, http://UnmeteredVPS.net/centos Virtual private server with CentOS 6 preinstalled Unmetered bandwidth = no overage charges -- To unsubscribe from this list: send the line "unsubscribe lartc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
