On 6/27/07, Martija, Ricardo V <rmartija@xxxxxxxxxxxxx> wrote:
Hi, I am very new to tc. I added a filter using the following command: tc filter add dev eth0 V parent 20:0 protocol ip prio 1 handle ::128 u32 match ip tos 0x44 0xfc flowid 20:1
tc filter add dev eth0 V parent 20:0 protocol ip pref 1234 prio 1 handle ::128 u32 match ip tos 0x44 0xfc flowid 20:1
To check if the filter rule was indeed added, I run tc filter show dev eth0 parent 20: This gave me the following output: filter protocol ip pref 1 u32 filter protocol ip pref 1 u32 fh 800: ht divisor 1 filter protocol ip pref 1 u32 fh 800::128 order 296 key ht 800 bkt 0 flowid 20:1 match 00440000/00fc0000 at 0 I tried deleting the filter rule that I added using: tc filter del dev eth0 pref 1 protocol ip handle 800::160
tc filter del dev eth0 pref 1234
This gave me the following message: Must specify filter type when using "handle" I modified the delete command, as follows: tc filter del dev eth0 pref 1 protocol ip handle 800::160 u32 This gave the following error message: RTNETLINK answers: Invalid argument I am pretty much stumped. Can anyone tell me how I can delete a tc filter rule? Thanks, Rick _______________________________________________ LARTC mailing list LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
-- Marco Casaroli SapucaiNet Telecom +55 35 34712377 ext 5 _______________________________________________ LARTC mailing list LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc