Hello, I am trying to mess with a prio type qdisc, and must be missing something. Here's my sample code: tc qdisc add dev eth0 root handle 1: prio tc filter add dev eth0 parent 1:0 prio 1 protocol ip u32 \ match ip dst 208.0.0.0/8 flowid 1:1 tc filter add dev eth0 parent 1:0 prio 3 protocol ip u32 \ match ip dst 0.0.0.0/0 flowid 1:3 I would assume that any traffic going to 208.x.x.x should be getting priority over all other traffic. But when I set up two simultaneous FTP uploads, one to a server in the 208.x.x.x block and one to another not in that block, both end up at the same transfer rate.. This is going into an ADSL line. What am I missing? Bob _______________________________________________ LARTC mailing list LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
