tc filter matches ip fileds inside pppoe frames

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I have a requirement which I guess it is not too unusually, however I haven't
quite figured out how to do it and couldn't find any examples which handle that.
 
I have made myself a Linux-based bridge, eth0 bridged with
eth1 to form br0.
 
In this bridge, I run 'tc' script to handle QoS.
 
So far nothing unusual.
 
However, what's different is that this bridge is sitted in between a pppoe client
and pppoe server, ie pppoe frames are bridge between the Linux bridge, and
I am interested to perform QoS on the pppoe frames, based on the ip tos setting
of the ppp packets ( encapsulated inside the pppoe frames ).
 
For example, normal tc script :-

tc filter add dev ppp0 parent 1:0 prio 10 u32 \
     match ip tos 0x10 0xff \
     flowid 1:4

This will work on a ppp0 device because the ppp0 has ip packets flowing through
it. Now in my bridge, there is no such device, I only have access to eth0 or eth1,
how could I perform the same thing on devices such as eth0 or eth1, but matching
the ip TOS setting inside the pppoe frame ?
 
Best regards.
 
 
****** Message from InterScan E-Mail VirusWall NT ******

** No virus found in attached file noname.htm
** No virus found in attached file noname.htm

This mail has been scanned by InterScan.
*****************     End of message     ***************

_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux