Hi ,
Are U test it for same remote site and same client ??
----- Original Message -----
From: "Alan Romaniuc" <alan.romaniuc@xxxxxxxxxxxxxxxxxx>
To: <lartc@xxxxxxxxxxxxxxx>
Sent: Wednesday, January 10, 2007 6:42 AM
Subject: Re: Load Balancing Problems
Hi all,
After setting the CONFIG_IP_ROUTE_MULTIPATH_CACHED to no and apply patches
from http://www.ssi.bg/~ja/#routes , everything is working fine. No more
problems with the two uplinks and one route only.
Thanks for the help... I've been fighting with that for one week....
I will point this solution in another places too.
Thanks again,
Alan
Luciano Ruete escreveu:
On Friday 05 January 2007 08:33, Alan Romaniuc wrote:
Hi,
I have a router that got its second link. I was trying to do load
balancing, but i can not get it to work properly.
Just one link works at time, and is always the second in the command ip
route add default table 222 proto static.
Am I missing something? My script is below. I am using Debian, tried
with kernel 2.6.19 (my compilation) or debian's one (2.6.18-3-486),
same results
Try "your compilation" without CONFIG_IP_ROUTE_MULTIPATH_CACHED
there are several threads on this topic in the archive, one as reference:
http://archives.free.net.ph/message/20060618.150532.8a6cc07f.en.html
If it solves the problem, maybe is time to contact the author of
Multipath Cached and send some report.
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
