Okay, the following may or may not work: on the interface of the router that is connected to the adsl add an engress HTB qdisc. Then add classes accordingly. The first one with highest priority will be for the 4Mbit traffic. The classes after this one will be dependent on your likely. Add some tc filters. The first one will match if dst ip is $IP_OF_ADSL or dst port is $THE_BROADCAST_PORT_OF_THE_ADSL and it will use htb class with highest priority. Packets not having destination the adsl will be matched in the filters afterwords, thus shaped and so. However, I am not sure, if all of the packets will not go under that htb class, because in their destination header they all have the adsl IP(the default gateway). Maybe someone on the list will englight me on that topic. -nik On Fri, 2006-08-18 at 12:47 +0200, Yves BLUSSEAU wrote: > The adsl modem has two functions: it give me access to internet (max 80ko/s > upload) et it is use to broadcast video stream at more than 4Mo/s. > I can't manage the modem. > My PC, the firewall and the modem are locally connected at 100Mbits Full > Duplex. > Like I said i want to shape the upload to internet and only to internet. > So do you know a good configuration to shape all but not the traffic > directly send to the modem (to it's IP) ? > > Yves > > ----- Original Message ----- > From: "Nikolay Kichukov hijacker-at-oldum.net |Linux Advanced Routing & > Traffic Control project/1.0-Allow|" <...> > To: <..................> > Sent: Friday, August 18, 2006 12:22 PM > Subject: Re: How to bypass traffic control for one IP > > > You surely do need to send the video stream at full speed, but what is > the point of doing so if the adsl modem(router) will still shape the > upload at the speed that your ISP gives to you? > > That will only saturate the link. > > -nik > > On Thu, 2006-08-17 at 21:05 +0200, Yves ........ wrote: > > Because my asl modem is also a router and it is used to send broadcast > > video > > to another network and so i need to send video stream at full speed to the > > modem. > > ----- Original Message ----- > > From: "nikolay hijacker-at-oldum.net |Linux Advanced Routing & Traffic > > Control project/1.0-Allow|" <...> > > To: <..................> > > Sent: Thursday, August 17, 2006 12:32 PM > > Subject: Re: How to bypass traffic control for one IP > > > > > > > why would you want to "access" the adsl modem at 100Mbps? > > > > > > What is the speed your ISP provides to the adsl modem? > > > > > > -nik > > > ----- Original Message ----- > > > From: "Yves ........" <2z7mbt002@xxxxxxxxxxxxxx> > > > To: <lartc@xxxxxxxxxxxxxxx> > > > Sent: Wednesday, August 16, 2006 6:16 PM > > > Subject: How to bypass traffic control for one IP > > > > > > > > > Hi all, > > > > > > i have a problem: i have an adsl modem that is connected to internet. I > > > can't manage this modem. > > > Between my PC and the modem i have a linux firewall that make the NAT > > > and > > > the traffic shapping. > > > I have create a script that limit the bandwidth of the "external" > > > interface of the firewall so i can manage my bandwidth for my internet > > > application. > > > The problem is that i need to access the adsl modem at full bandwith > > > (100mbits) from my PC (through the linux firewall). > > > So i need a configuration where all the internet IP are limited by the > > > traffic control and where the IP of the modem is not slowdown by traffic > > > shapping. > > > > > > Who have an idea for such configuration ? > > > > > > Thanks in advance. > > > > > > Yves > > > > > > > > > -------------------------------------------------------------------------------- > > > > > > > > >> _______________________________________________ > > >> LARTC mailing list > > >> LARTC@xxxxxxxxxxxxxxx > > >> http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc > > >> > > > > > > > > -- Когато сме щастливи, сме добри. Но когато сме добри, не винаги сме щастливи... -Оскар Уайлд _______________________________________________ LARTC mailing list LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
