Greetings again Paul, : class ( <$call1> ) if ip_dst == 10.100.1.6 && tcp_dport == 22 : if ip_src == 10.100.1.4 && tcp_sport == 22 : ; : : Now when i apply this traffic TO 6 on port 22 is indeed limited : to the speed i specify BUT it doesn't seem to take the src into : account at all. If i change the src to anything, even an address : that doesn't exist it still limits the speed. : : I need this class to only apply is both source and destination : ips are satisfied. Are you using tcng class selection paths in your configuration file? Could you show us a bit more of your config file? Tell us a bit about your networking configuration. Is this a device acting as a router (L3) or a bridge (L2)? Is there any NAT involved? In order to help you solve this problem, we'll need to know a bit more about your networking configuration. -Martin -- Martin A. Brown http://linux-ip.net/ _______________________________________________ LARTC mailing list LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
