On Thu, Mar 30, 2006 at 01:17:00AM +0200, Beat Meier wrote: > What I want now is that for example in "class" 128Kbps the ip > 10.0.0.5, 10.0.0.8 etc. goes BUT every ip adress will have 128Kbps. > The same for 256Kbps. > 128Kbps > |_ 10.0.0.5 > |_ 10.0.0.8 > > 256Kbpss > |_ 10.0.0.6 > |_ 10.0.0.7 I don't know if such a scheduler exists. With HTB, you could do it, but you would have to create a separate class per user. Which is not that much different from what this scheduler would do, as it has to keep track of every single IP's bandwidth either way. > Do I have to do it like in example 15.1 (Cookbook) in the howto i.e. > if I have 1000 ip addresses they are all flat there in? Example 15.1 seems to be based on CBQ. I did not have much luck with this scheduler myself. But as far as I know, it also would require you to create one separate class per user. > What I have noticed there are a lot of example but always with 2 different > speeds but no one with customers of the same speed, same queueing disiplines > but should not share the bandwidth but have each one the full speficied > bandwidth. I do not know such a script, since I'm doing traffic shaping for home use only. If you're looking for a script that does not primarily work by prioritizing traffic classes, but which works on a per-user basis, you could have a look at my own script. (http://www.metamorpher.de/fairnat) That is if you're willing to regard my former flatmates as customers and my former linux-based old PC router as high-end internet gateway. The script will by far not be flexible enough for a project of your scale, but at least it's user based and I put some effort into documenting it, so maybe it will be useful as an example to you. Kind regards Andreas Klauer _______________________________________________ LARTC mailing list LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
