I read the previous thread about this but I seem to have a small problem.
I'm running gentoo with 2.6.14 kernel and have applied the patch from
http://www.ssi.bg/~ja/#routes.
If I try to lynx to two different pages from the box itself it switches
the interfaces every other time which is how it's supposed to work.
If I use an extra machine and set it's gateway to 10.0.4.211(eth0), then
all requests are being sent to just one interface all the time. The same
happens if I try other machines.
It's only requests generated inside the box which are being routed
properly. I'm just wondering if something is amiss in my setup.
I have also tried the mpath2.sh script, but I got the same results.
My setup is like this:
eth0: 10.0.4.211 (internal network)
eth1: 192.168.1.2 (ISP1)
eth2: 10.0.0.2 (ISP2)
Commands:
ip route add 192.168.1.0/24 dev eth1 src 192.168.1.2 table T1
ip route add default via 192.168.1.1 table T1
ip route add 10.0.0.0/24 dev eth2 src 10.0.0.2 table T2
ip route add default via 10.0.0.1 table T2
ip rule add from 192.168.1.2 table T1
ip rule add from 10.0.0.2 table T2
ip route add default scope global nexthop via 192.168.1.1 dev eth1
weight 1 nexthop via 10.0.0.1 dev eth2 weight 1
iptables -t nat -A PREROUTING -s 10.0.4.0/255.255.254.0 -d
192.168.1.0/24 -j ACCEPT
iptables -t nat -A PREROUTING -s 10.0.4.0/255.255.254.0 -d 10.0.0.0/24
-j ACCEPT
iptables -t nat -A POSTROUTING -o eth1 -s 10.0.4.0/255.255.254.0 -j
MASQUERADE
iptables -t nat -A POSTROUTING -o eth2 -s 10.0.4.0/255.255.254.0 -j
MASQUERADE
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
