Hello,
I have configured advanced routing with success using three (03)
network adapters ( ETH0, ETH1 and ETH2).
Now I have to configure an addittion range in the same Interface
ETH0 ( another internet ip range address ), so I would like to have TWO
different ranges at the same ETHERNET CARD ( in this case ETH0 ) AND
having advanced routing running it.
I Did the same configurations as I already done it before and it is
not working. When testing through the secondary ip address the packets
get out from the wrong default gateway, however testing from primary
range I am able to route.
Is it possible to do advanced routing having in the same Interface
TWO different ip range address?
Somebody had done this somewhere?
Thanks in advanced
--
Atenciosamente,
Leonardo Borda
Netwall Tecnologia
Fone/Fax: +55 51 3388.3201
Celular: +55 51 8131.9740
mailto:borda@xxxxxxxxxxxxxx - http://www.netwall.com.br
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
