Hi, I had a nice router which was able to split my outgoing webtraffic over a dsl line, then I got a power failure and now my settings are lost and I don't get it to run. I've configured a iptable rule like: /sbin/iptables -A PREROUTING -t mangle -i eth1 -s 192.168.1.10 -p TCP --dport 80 -j MARK --set-mark 1 and ip rule add fwmark 1 lookup 10 ip route add default via 192.168.2.2 dev eth3 then I have this kernel parameters: echo "1" > /proc/sys/net/ipv4/conf/eth3/accept_redirects echo "1" > /proc/sys/net/ipv4/conf/eth3/accept_source_route I remember that I had to use those parameter but this doesn't work, interesting is that I can successfully configure: ip rule from 192.168.1.5 lookup 10 Any help would be great. Matt. _______________________________________________ LARTC mailing list LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
