wondershaper tweaking

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi all, ive got wondershaper working well with the highest download
while maintaing minimal latency but the problem is this:

ive got 2 nics in the linux router eth0 and eth1. eth1= internet
interface but this is connected to a router say 10.0.0.190, now off that
router there are other servers, mail server, domino server etc now if i
shape on eth1 ingress and egress using the wondershaper script then i
only get internet speeds to my local servers, when i could be getting
100mbit :)

Hope you can see my dilemma, what i want to do basically is within use
some tc commands to say do not shape traffic at all if it is coming to
or going to these ips: 10.0.0.2 10.0.0.3 10.0.0.4 etc
Im still reading the howtos on how to write my own rules but since the
wondershaper script is doing exactly what i want i had hoped that
someone would know the commands to implement this now :)


my diagram

lan clients -> linux router -> eth1 -> 100mbit router/switch -> PPPOa
                                            eth1-> 100mbit/switch ->
server1,2,3

Cheers

Anthony
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux