|
Good afternoon,
I am a newbie to lartc. I have read the HOWTO. I
set up a CBQ traffic control using the following commands, and it caused my VNC
connection to break frequently.
=======================================================================
**CBQ: cbq-1280.My_shaper
/sbin/tc qdisc del dev lo root /sbin/tc qdisc add dev lo root handle 1 cbq bandwidth 20Mbps avpkt 1000 cell 8 /sbin/tc class change dev lo root cbq weight 2Mbps allot 1514 /sbin/tc class add dev lo parent 1: classid 1:1280
cbq bandwidth 20Mbps rate 100Kbps weight 10Kbps prio 5 allot 1514 cell 8
maxburst 20 avpkt 1000 bounded
/sbin/tc qdisc add dev lo parent 1:1280 handle 1280 tbf rate 100Kbps buffer 10Kb/8 limit 15Kb mtu 1500 /sbin/tc filter add dev lo parent 1:0 protocol ip prio 100 u32 match ip dst 192.168.4.0/24 classid 1:1280 ========================================================================
I tried deleting the qdisc, but my VNC connection
still breaks after i issue this command:
% tc qdisc del dev lo root
What is the correct way to restore to "factory
default settings"?
Thanks for reading. Please help me.
Rgds,
Siow Vic |
_______________________________________________ LARTC mailing list LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
