Hello all,
I am providing broadband service through DVB circuit.
I have 4KB uplink and 32KB downlink. I want to share
32KB downlink bandwidth among 192.168.0.0/24 (20 users
in this subnet i.e 192.168.0.2-192.168.0.22)subnet
where each user will get 2KB to 6KB bandwidth. And
from 4KB uplink bandwidth each users will get only 1KB
to 2KB bandwidth.
Here is my configuration
|-------|==ethi 192.160.0.1 connected
to client
| |
|gateway|==eth0 201.91.89.81 uplink
through DSL
| server|
|-------|==penval0 Downlink through
DVB
To get my desired result I configured htb in this
way:
----------------------------------
/sbin/tc qdisc del dev eth0 root
/sbin/tc qdisc add dev eth0 root handle 1 htb default
30 r2q 100
/sbin/tc qdisc del dev eth1 root
/sbin/tc qdisc add dev eth1 root handle 1 htb default
30
/sbin/tc class add dev eth0 parent 1: classid 1:2 htb
rate 32kbit burst 15k
/sbin/tc class add dev eth0 parent 1:2 classid 1:3 htb
rate 8kbit ceil 16kbit burst 15k
/sbin/tc qdisc add dev eth0 parent 1:3 handle 3 sfq
perturb 10
/sbin/tc filter add dev eth0 parent 1:0 protocol ip
prio 100 u32 match ip dst 192.168.0.0/24 classid 1:3
/sbin/tc class add dev eth0 parent 1:2 classid 1:30
htb rate 1kbit ceil 32kbit burst 15k
/sbin/tc qdisc add dev eth0 parent 1:30 handle 30 sfq
perturb 10
/sbin/tc class add dev eth1 parent 1: classid 1:2 htb
rate 256kbit burst 15k
/sbin/tc class add dev eth1 parent 1:2 classid 1:3 htb
rate 16kbit ceil 48kbit burst 15k
/sbin/tc qdisc add dev eth1 parent 1:3 handle 3 sfq
perturb 10
-------------------------------------------------------
But these rules resulted very bad. My total service
became slowdown.
Anyone could advice me how should i configure htb to
get my desired result?
__________________________________
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!
http://smallbusiness.yahoo.com/resources/
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
