tc filter change/replace

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 Tomas Graf:
 
 You mentioned that "All classifier except rsvp are
 changeable in the 
 latest bk. The patchset has gone in around
 rc1-bk3-5"
 
 
 Well issue 1 is that in iproute-latest (as well as
 the
 one released 
 yesterday) the output of: tc show filter dev eth0
 parent ffff:"
 and change/replace DO NOT WORK.

-----------------------------------------------------------------------
 filter protocol ip pref 50 u32 fh 800::801 order
 2049
 ht 800 bkt 0 match 
 0a010102/ffffffff at 12 police 0x4 rate 20000bit
 burst
 2559b mtu 2kb 
 action reclassify ref -10352222812 bind -8666697856
 
 on the bk version (latest changeLog entry 18-1-2005)
 as you suggested 
 the output is NOT VERBOSE ENOUGH to see if all
 parameters are working, 
 but change/replace SEEM TO BE WORKING.
 
 Heres the output:
 
 filter protocol ip pref 50 u32 fh 800::801 order
 2049
 ht 800 bkt 0 match 
 0a010102/ffffffff at 12
 
 
 
 ISSUE 2
 -------
 In lots of computers i try to install iproute2 i get
 an error about 
 db_185.h missing . Issuing a simple
 
 apt-get install libdb4.1-dev
 
 resolves the problem and the arpd compiles
 perfectly.
 Maybe consider 
 documenting that somewhere.



		
__________________________________ 
Do you Yahoo!? 
Meet the all-new My Yahoo! - Try it today! 
http://my.yahoo.com 
 

_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux