Hi folks,
I have a strange situation. When I add branches to the tree, everything goes to the default class.
The error might be obvious, but I cannot find it. I would really appreciate your help.
this works, nothing goes to "1:9999":
#############################################################################
/sbin/iptables -F -t mangle
/sbin/tc qdisc del dev eth1 root > /dev/null 2>&1
/sbin/tc qdisc add dev eth1 root handle 1: htb default 9999
/sbin/tc class add dev eth1 parent 1: classid 1:1 htb rate 100Mbit ceil 100Mbit
/sbin/tc class add dev eth1 parent 1:1 classid 1:9999 htb rate 128kbit
/sbin/tc class add dev eth1 parent 1:1 classid 1:4 htb rate 100Mbit
/sbin/tc class add dev eth1 parent 1:4 classid 1:28 htb rate 510kbit
#
/sbin/iptables -A POSTROUTING -o eth1 -t mangle -d 192.168.0.0/16 -j MARK --set-mark 4
/sbin/tc filter add dev eth1 protocol ip parent 1:0 prio 3 handle 4 fw flowid 1:4
#
/sbin/iptables -A POSTROUTING -o eth1 -t mangle -d 192.168.200.0/24 -j MARK --set-mark 28
/sbin/tc filter add dev eth1 protocol ip parent 1:0 prio 3 handle 28 fw flowid 1:28
#############################################################################
when I add subclasses to "1:28", traffic goes to "1:34" and "1:35", but exceeding traffic goes to "1:9999" instead of being placed at "1:28":
#############################################################################
/sbin/iptables -F -t mangle
/sbin/tc qdisc del dev eth1 root > /dev/null 2>&1
/sbin/tc qdisc add dev eth1 root handle 1: htb default 9999
/sbin/tc class add dev eth1 parent 1: classid 1:1 htb rate 100Mbit ceil 100Mbit
/sbin/tc class add dev eth1 parent 1:1 classid 1:9999 htb rate 128kbit
/sbin/tc class add dev eth1 parent 1:1 classid 1:4 htb rate 100Mbit
/sbin/iptables -A POSTROUTING -o eth1 -t mangle -d 192.168.0.0/16 -j MARK --set-mark 4
/sbin/tc filter add dev eth1 protocol ip parent 1:0 prio 3 handle 4 fw flowid 1:4
#
/sbin/tc class add dev eth1 parent 1:4 classid 1:28 htb rate 510kbit
/sbin/iptables -A POSTROUTING -o eth1 -t mangle -d 192.168.200.0/24 -j MARK --set-mark 28
/sbin/tc filter add dev eth1 protocol ip parent 1:0 prio 3 handle 28 fw flowid 1:28
#
/sbin/tc class add dev eth1 parent 1:28 classid 1:34 htb rate 64kbit
/sbin/iptables -A POSTROUTING -o eth1 -t mangle -d 192.168.200.8/32 -j MARK --set-mark 34
/sbin/tc filter add dev eth1 protocol ip parent 1:0 prio 3 handle 34 fw flowid 1:34
#
/sbin/tc class add dev eth1 parent 1:28 classid 1:35 htb rate 64kbit
/sbin/iptables -A POSTROUTING -o eth1 -t mangle -d 192.168.200.14/32 -j MARK --set-mark 35
/sbin/tc filter add dev eth1 protocol ip parent 1:0 prio 3 handle 35 fw flowid 1:35
#############################################################################
iptables says:
iptables -L -n -v -t mangle
Chain PREROUTING (policy ACCEPT 184K packets, 105M bytes)
pkts bytes target prot opt in out source destination
Chain INPUT (policy ACCEPT 115K packets, 63M bytes)
pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 68617 packets, 42M bytes)
pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 123K packets, 63M bytes)
pkts bytes target prot opt in out source destination
Chain POSTROUTING (policy ACCEPT 191K packets, 105M bytes)
pkts bytes target prot opt in out source destination
1827 1990K MARK all -- * eth1 0.0.0.0/0 192.168.0.0/16 MARK set 0x4
1827 1990K MARK all -- * eth1 0.0.0.0/0 192.168.200.0/24 MARK set 0x1c
174 245K MARK all -- * eth1 0.0.0.0/0 192.168.200.8 MARK set 0x22
30 10519 MARK all -- * eth1 0.0.0.0/0 192.168.200.14 MARK set 0x23
_______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
