I applied this to following Network
+--------------+ eth1 +---------+ eth0 +--------+
| 192.168.3.31 |------------------| |------------------|internet| +--------------+ 192.168.3.32 +---------+ 192.168.2.198 +---|----+
V
gateway
and modified the rate and IP to look it this way
tc qdisc add dev eth1 root handle 1: cbq avpkt 1000 bandwidth 100mbit
tc class add dev eth1 parent 1: classid 1:1 cbq rate 1kbit allot 1500 prio 5 bounded isolated
tc filter add dev eth1 parent 1: protocol ip prio 16 u32 match ip dst 192.168.3.31 flowid 1:1
tc qdisc add dev eth1 parent 1:1 sfq perturb 10
This limit packets from 192.168.3.31 to 1kbit How can it modify it to not to limit it for local IP addresses.
Ie Only the traffic for internet is limited to 1kbps :wq
Amit
ro0ot wrote:
Hi,
I managed to fix 128kbit for an IP address of 192.168.200.3 as below: -
tc qdisc add dev eth3 root handle 1: cbq avpkt 1000 bandwidth 100mbit
tc class add dev eth3 parent 1: classid 1:1 cbq rate 128kbit allot 1500 prio 5 bounded isolated
tc filter add dev eth3 parent 1: protocol ip prio 16 u32 match ip dst 192.168.200.3 flowid 1:1
tc qdisc add dev eth3 parent 1:1 sfq perturb 10
How can I make it burstable to 256kbit? What command I need to add in?
Regards, ro0ot
_______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
