On Friday 26 November 2004 13:38, James Lista wrote: > buddies, > > im newbie to traffic control and been studying htb scripts (examples), I > wonder how to use params, this line below for ex.: > -------- > $TC filter add dev $WAN parent 1: protocol ip prio 10 u32 match ip protocol > 6 0xff match u 8 0x05 0x0f at 0 match u16 0x0000 0xffc0 at 2 match u8 0x10 > 0xff at 33 flowid 1:$VIP > -------- > > I understood it is adding a filter to go to class $VIP in device wan (eth0 > in my case)........ > I also understant that "match ip protocol 6" <-- 6 = TCP - I see that in > /etc/protocols, but why that 0xff after it ? > > can someone explain the rest of the params ? I donnot understant those > params like prio 10, u32, match u16 0x0000 0xffc0, etc ! Start reading and reading and reading and more reading: http://www.lartc.org http://www.docum.org Stef -- stef.coene@xxxxxxxxx "Using Linux as bandwidth manager" http://www.docum.org/ _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
