Drink Linux wrote:
Hello good day to all ... this is my setup
1 Linux Wireless Access Point, connected are 4
wireless gateway in which i needed to apply shaping
...
ok here is the weird part... clients on each gateway
download files from the Acess Point ... a 500 mb file
through ftp
on gateway 1 which is up to 64 kbps ... the result is
from 60-64 kbps speed which is fine ...
on gateway 2 which is 128 kbps ... the result is
varying from 130 - 132 kbps (why does it exceed)? but
it is acceptable nevertheless
on gateway 3 which is up to 256 kbps ... the result is
the lowest rate clients can get is up to 285-286 above
limit ?!?!! why did that happen...
on gateway 4 .. which is up to 512 kbps ... the rate
of the client is up to 600+ kbps ... why is that so ?!
anyway here is my script for anyone who can help
...thanks
one thing is when i ftp 2 files ... the speed is
higher than the ceiling limit ....
kernel is 2.4.22 ... with QoS enabled ....
tc qdisc add dev wlan0 root handle 1:0 htb
tc class add dev wlan0 parent 1:0 classid 1:1 htb rate
1024kbps ceil 1024kbps
tc class add dev wlan0 parent 1:1 classid 1:10 htb
rate 1kbps ceil 64kbps
tc class add dev wlan0 parent 1:1 classid 1:20 htb
rate 1kbps ceil 128kbps
tc class add dev wlan0 parent 1:1 classid 1:30 htb
rate 1kbps ceil 256kbps
tc class add dev wlan0 parent 1:1 classid 1:40 htb
rate 1kbps ceil 512kbps
tc filter add dev wlan0 parent 1:0 protocol ip u32
match ip dst 10.40.40.245 flowid 1:10
tc filter add dev wlan0 parent 1:0 protocol ip u32
match ip dst 10.40.40.246 flowid 1:20
tc filter add dev wlan0 parent 1:0 protocol ip u32
match ip dst 10.40.40.247 flowid 1:30
tc filter add dev wlan0 parent 1:0 protocol ip u32
match ip dst 10.40.40.248 flowid 1:40
kbps = k bytes/sec maybe you mean kbit for the rates.
Andy.
_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
